metiletanoat Posted October 19, 2010 Share Posted October 19, 2010 I've been working for 2 week on making this multiboot usb flash drive since i found that booting from usb flash drive is possible.I still new,lack of knowledge and still reading on how to improve my built.This project is built on my kingston DT G2 16gbit is my pleasure if anyone can give suggestion on my built------------------------------------------------------------------title 1. Launch support for USB2.0title 2. Start from harddisk (WinXP and Win7 after 1st part installation direct to here until done)title 3. Boot CDROMtitle 4. Setup WinXPtitle 5. Setup Windows 7title 6. Windows XP Recovery Console -----> fail.it launch (title 4. Setup WinXP)title 7. Windows 7 Recovery Console title 8. Launch LiveXP -----> fail.it launch (title 4. Setup WinXP).folder remove already from pendrive title 9. Launch MiniXP ----> Extracted from WAREZ.used for fast troubleshooting.iso only 120mbtitle 10. Launch Live Win7title 11. Launch Hiren 9.9title 12. Virus Removertitle 13. DOS----------------------------------------------This is root of my usb flash drive directory This is how my menu.lst look liketimeout 30default /defaultgfxmenu = /wallpaper/boot.gfx.gztitle 1. Launch support for USB2.0root (hd0,0)kernel /iso/plpbt.bintitle 2. Start from harddiskis map (hd8) (hd0) || map (hd7) (hd0) || map (hd6) (hd0) || map (hd5) (hd0) || map (hd4) (hd0) || map (hd3) (hd0) || map (hd2) (hd0) || map (hd1) (hd0)is map (hd0) (hd1) || map (hd0) (hd2) || map (hd0) (hd3) || map (hd0) (hd4) || map (hd0) (hd5) || map (hd0) (hd6) || map (hd0) (hd7) || map (hd0) (hd8)map --hookchainloader +1boottitle 3. Boot CDROMcdrom --initmap --hookchainloader (cd0)rootnoverify (cd0) title 4. Setup WinXPmap --unmap=0:0xffmap --unhookroot (hd0,0)savedefault 1chainloader /XPSTPbootmap --unmap=0:0xffmap --unhooktitle 5. Setup Windows 7map --unmap=0:0xffmap --unhooksavedefault 1root (hd0,0)find --set-root /bootmgrchainloader /bootmgrbootmap --unmap=0:0xffmap --unhooktitle 6. Windows XP Recovery Consolefind --set-root /cmdcons/setupldr.binchainloader /cmdcons/setupldr.bintitle 7. Windows 7 Recovery Consolefind --set-root /iso/win7recovery32.isomap /iso/win7recovery32.iso (0xff) map --hookchainloader (0xff)boot title 8. Launch LiveXP -----> fail.fail.it launch winXP setup.folder remove already from pendrivemap --unmap=0:0xffmap --unhookfind --set-root /minint/setupldr.binchainloader /minint/setupldr.bintitle 9. Launch MiniXP find --set-root --ignore-floppies /iso/miniXP.isomap --mem /iso/miniXP.iso (0xff)map --hookchainloader (0xff)/HBCD/XPLOADER.BINtitle 10. Launch Live Win7find --set-root --ignore-floppies /iso/Win7Live.isomap --mem /iso//iso/Win7Live.iso (0xff)map --hookchainloader (0xff)/BOOTMGRtitle 11. Launch WAREZfind --set-root --ignore-floppies /iso/WAREZ.isomap /iso/WAREZ.iso (hd32)map --hookchainloader (hd32)boottitle 12. Virus Removerfind --set-root /virusremover.lstconfigfile /virusremover.lsttitle 13. DOSmap --unhookmap --mem (hd0,0)/iso/dos.img (fd0)map --hookchainloader (fd0)+1rootnoverify (fd0)title Rebootreboottitle Shutdown computerhalt----------------------------------------------------------------virusremover.lstdefault 0gfxmenu = /iso/boot.gfx.gztitle PREVIOUS MENUconfigfile /menu.lst title Kaspersky 2010 Rescuemap (hd0,0)/kav/kav.iso (0xff) || map --mem (hd0,0)/kav/kav.iso (0xff)map --hookchainloader (0xff)title AVG Rescue Diskfind --set-root --ignore-floppies /iso/avg.isomap /iso/avg.iso (hd32)map --hookchainloader (hd32)boot----------------------------------------------------------------first of all winxp n win 7 setup was built using usb multiboot 10.ive set boot.ini to launch grub4dos as default with timeout 0.(i dont know why it looks like too complicated but i love grub4dos gui)-----------------------------------------------------------------Detail :title 4. Setup WinXP .it run great with usb2.0 support. 16min winxp installation including basic software eq avira,office,winamp,klite,adobe reader etc.)^^Used previous winxp source that had been create using nlite.unattended.^^Add wpi -in U:\$WIN_NT$.~LS\I386\txtsetup.sif ,add this text [sourceDisksFiles] wpi.cmd = 100,,,,,,_x,2,0,0-in U:\$WIN_NT$.~LS\I386\wpi.cmdSET USBDRIVE=SET TAGFILE=\wpi\wpi.exe:: First Limited Range to Prevent Windows No Drive Alert due to Cardreader:: For case of Repair Install when Drive not found, than Extended Range and:: Windows No Drive Alert - Press 4x Continue for Cardreader DrivesFOR %%h IN (C D M N O P Q R S T U V W X Y) DO IF EXIST "%%h:%TAGFILE%" SET USBDRIVE=%%h:if "%USBDRIVE%" == "" ( FOR %%h IN (C D E F G H I J K L M N O P Q R S T U V W X Y) DO IF EXIST "%%h:%TAGFILE%" SET USBDRIVE=%%h:)start %USBDRIVE%wpi/wpi.exetitle 5. Setup Windows 7(takes about 30min to finish full setup)-ive do nothing with this setup.just let usb multiboot 10 do it successfullytitle 6. Windows XP Recovery Consoletitle 8. Launch LiveXPi dont know whats the problem with those 2 but when i run it,it goes to winxp installation (it run title 4. Setup WinXP)title 7. Windows 7 Recovery Consolethis iso ive download it somewhere..forgot already since too many website i download n test..its run greattitle 9. Launch MiniXP it is minixp extracted from WAREZ.tutorial from bootland on how to extract minixp from warezi love it because its is fast and small iso (120mb).title 10. Launch Live Win7this iso ive download it somewhere..forgot also since too many website i download n test..its run greattitle 12. Virus RemoverConsist of avg and kaspersky rescue cd.avg rescue run directly iso while kaspersky rescue cd need to do some adjustment for iso that had been downloaded from kaspersky website.sorry i forgot also which website guide me to do with kaspersky.i have to extract kaspersky iso,and move the folder in root directory.see above attachment.in the kav.iso ,all folder are deleted except boot folder so the kav.iso only 9.73mb. image.squashfs reside in kav foldertitle 13. DOSsupport ntfs n usbdos.img only 720kb-autoexec.batxmsdsk.exe 30000 r: /yecho offLH NTFSDOS.EXELH CTMOUSELH CTMOUSE > NUL-config.sysDOS=HIGH,UMBlastdrive=Zdevice=HIMEM.SYSdevicehigh=USBASPI.SYS /e /nocbc /norstdevicehigh=DI1000DD.SYS /L:U--------------------------------------------------------------------------Thats all my built from my little knowledge.its looks like pretty mess.i dont like my root folder structure..too much folder..i dont know how to simplify it Link to comment Share on other sites More sharing options...
Sp0iLedBrAt Posted October 19, 2010 Share Posted October 19, 2010 title 9. Launch MiniXP ----> Extracted from WAREZ.used for fast troubleshooting.iso only 120mbtitle 11. Launch Hiren 9.9 More than enough for you NOT to get help! This forum does not deal with or support WAREZ! Link to comment Share on other sites More sharing options...
Tripredacus Posted October 19, 2010 Share Posted October 19, 2010 Please read the forum rules!I will close this topic Link to comment Share on other sites More sharing options...
Recommended Posts