metiletanoat

I've been working for 2 week on making this multiboot usb flash drive since i found that booting from usb flash drive is possible. I still new,lack of knowledge and still reading on how to improve my built. This project is built on my kingston DT G2 16gb it is my pleasure if anyone can give suggestion on my built ------------------------------------------------------------------ title 1. Launch support for USB2.0 title 2. Start from harddisk (WinXP and Win7 after 1st part installation direct to here until done) title 3. Boot CDROM title 4. Setup WinXP title 5. Setup Windows 7 title 6. Windows™ XP Recovery Console -----> fail.it launch (title 4. Setup WinXP) title 7. Windows™ 7 Recovery Console title 8. Launch LiveXP -----> fail.it launch (title 4. Setup WinXP).folder remove already from pendrive title 9. remove title 10. Launch Live Win7 title 11. remove title 12. Virus Remover title 13. DOS ---------------------------------------------- This is root of my usb flash drive directory This is how my menu.lst look like timeout 30 default /default gfxmenu = /wallpaper/boot.gfx.gz title 1. Launch support for USB2.0 root (hd0,0) kernel /iso/plpbt.bin title 2. Start from harddisk is map (hd8) (hd0) || map (hd7) (hd0) || map (hd6) (hd0) || map (hd5) (hd0) || map (hd4) (hd0) || map (hd3) (hd0) || map (hd2) (hd0) || map (hd1) (hd0) is map (hd0) (hd1) || map (hd0) (hd2) || map (hd0) (hd3) || map (hd0) (hd4) || map (hd0) (hd5) || map (hd0) (hd6) || map (hd0) (hd7) || map (hd0) (hd8) map --hook chainloader +1 boot title 3. Boot CDROM cdrom --init map --hook chainloader (cd0) rootnoverify (cd0) title 4. Setup WinXP map --unmap=0:0xff map --unhook root (hd0,0) savedefault 1 chainloader /XPSTP boot map --unmap=0:0xff map --unhook title 5. Setup Windows 7 map --unmap=0:0xff map --unhook savedefault 1 root (hd0,0) find --set-root /bootmgr chainloader /bootmgr boot map --unmap=0:0xff map --unhook title 6. Windows™ XP Recovery Console find --set-root /cmdcons/setupldr.bin chainloader /cmdcons/setupldr.bin title 7. Windows™ 7 Recovery Console find --set-root /iso/win7recovery32.iso map /iso/win7recovery32.iso (0xff) map --hook chainloader (0xff) boot title 8. Launch LiveXP -----> fail.fail.it launch winXP setup.folder remove already from pendrive map --unmap=0:0xff map --unhook find --set-root /minint/setupldr.bin chainloader /minint/setupldr.bin title 9. remove title 10. Launch Live Win7 find --set-root --ignore-floppies /iso/Win7Live.iso map --mem /iso//iso/Win7Live.iso (0xff) map --hook chainloader (0xff)/BOOTMGR title 11. remove title 12. Virus Remover find --set-root /virusremover.lst configfile /virusremover.lst title 13. DOS map --unhook map --mem (hd0,0)/iso/dos.img (fd0) map --hook chainloader (fd0)+1 rootnoverify (fd0) title Reboot reboot title Shutdown computer halt ---------------------------------------------------------------- virusremover.lst default 0 gfxmenu = /iso/boot.gfx.gz title PREVIOUS MENU configfile /menu.lst title Kaspersky 2010 Rescue map (hd0,0)/kav/kav.iso (0xff) || map --mem (hd0,0)/kav/kav.iso (0xff) map --hook chainloader (0xff) title AVG Rescue Disk find --set-root --ignore-floppies /iso/avg.iso map /iso/avg.iso (hd32) map --hook chainloader (hd32) boot ---------------------------------------------------------------- first of all winxp n win 7 setup was built using usb multiboot 10. ive set boot.ini to launch grub4dos as default with timeout 0.(i dont know why it looks like too complicated but i love grub4dos gui) ----------------------------------------------------------------- Detail : title 4. Setup WinXP .it run great with usb2.0 support. 16min winxp installation including basic software eq avira,office,winamp,klite,adobe reader etc.) ^^Used previous winxp source that had been create using nlite.unattended. ^^Add wpi -in U:\$WIN_NT$.~LS\I386\txtsetup.sif ,add this text [sourceDisksFiles] wpi.cmd = 100,,,,,,_x,2,0,0 -in U:\$WIN_NT$.~LS\I386\wpi.cmd SET USBDRIVE= SET TAGFILE=\wpi\wpi.exe :: First Limited Range to Prevent Windows No Drive Alert due to Cardreader :: For case of Repair Install when Drive not found, than Extended Range and :: Windows No Drive Alert - Press 4x Continue for Cardreader Drives FOR %%h IN (C D M N O P Q R S T U V W X Y) DO IF EXIST "%%h:%TAGFILE%" SET USBDRIVE=%%h: if "%USBDRIVE%" == "" ( FOR %%h IN (C D E F G H I J K L M N O P Q R S T U V W X Y) DO IF EXIST "%%h:%TAGFILE%" SET USBDRIVE=%%h: ) start %USBDRIVE%wpi/wpi.exe title 5. Setup Windows 7(takes about 30min to finish full setup) -ive do nothing with this setup.just let usb multiboot 10 do it successfully title 6. Windows™ XP Recovery Console title 8. Launch LiveXP i dont know whats the problem with those 2 but when i run it,it goes to winxp installation (it run title 4. Setup WinXP) title 7. Windows™ 7 Recovery Console this iso ive download it somewhere..forgot already since too many website i download n test..its run great title 9. remove title 10. Launch Live Win7 this iso ive download it somewhere..forgot also since too many website i download n test..its run great title 12. Virus Remover Consist of avg and kaspersky rescue cd.avg rescue run directly iso while kaspersky rescue cd need to do some adjustment for iso that had been downloaded from kaspersky website. sorry i forgot also which website guide me to do with kaspersky.i have to extract kaspersky iso,and move the folder in root directory.see above attachment.in the kav.iso ,all folder are deleted except boot folder so the kav.iso only 9.73mb. image.squashfs reside in kav folder title 13. DOS support ntfs n usb dos.img only 720kb -autoexec.bat xmsdsk.exe 30000 r: /y echo off LH NTFSDOS.EXE LH CTMOUSE LH CTMOUSE > NUL -config.sys DOS=HIGH,UMB lastdrive=Z device=HIMEM.SYS devicehigh=USBASPI.SYS /e /nocbc /norst devicehigh=DI1000DD.SYS /L:U -------------------------------------------------------------------------- Thats all my built from my little knowledge.its looks like pretty mess. 1.i dont like my root folder structure..too much folder..i dont know how to simplify it.what can i do now is just set hidden.. 2.both title 6 (winxp recovery) and title 8 (livexp) launch (title 4. Setup WinXP) 3.about title 2( Start from harddisk)..is this right way to continue winxp/win7 installation after 1st phase installation?can i use it on computer with multiple hard disk and partition? 4.ive done make new win7 lite unattended iso with RT 7lite.is it possible to add this 2nd win7 setup to the build?

my bad..ill post it here after do some editing

ive update my built now...but its looks like still messy..any suggestion?

I've been working for 2 week on making this multiboot usb flash drive since i found that booting from usb flash drive is possible. I still new,lack of knowledge and still reading on how to improve my built. This project is built on my kingston DT G2 16gb it is my pleasure if anyone can give suggestion on my built ------------------------------------------------------------------ title 1. Launch support for USB2.0 title 2. Start from harddisk (WinXP and Win7 after 1st part installation direct to here until done) title 3. Boot CDROM title 4. Setup WinXP title 5. Setup Windows 7 title 6. Windows XP Recovery Console -----> fail.it launch (title 4. Setup WinXP) title 7. Windows 7 Recovery Console title 8. Launch LiveXP -----> fail.it launch (title 4. Setup WinXP).folder remove already from pendrive title 9. Launch MiniXP ----> Extracted from WAREZ.used for fast troubleshooting.iso only 120mb title 10. Launch Live Win7 title 11. Launch Hiren 9.9 title 12. Virus Remover title 13. DOS ---------------------------------------------- This is root of my usb flash drive directory This is how my menu.lst look like timeout 30 default /default gfxmenu = /wallpaper/boot.gfx.gz title 1. Launch support for USB2.0 root (hd0,0) kernel /iso/plpbt.bin title 2. Start from harddisk is map (hd8) (hd0) || map (hd7) (hd0) || map (hd6) (hd0) || map (hd5) (hd0) || map (hd4) (hd0) || map (hd3) (hd0) || map (hd2) (hd0) || map (hd1) (hd0) is map (hd0) (hd1) || map (hd0) (hd2) || map (hd0) (hd3) || map (hd0) (hd4) || map (hd0) (hd5) || map (hd0) (hd6) || map (hd0) (hd7) || map (hd0) (hd8) map --hook chainloader +1 boot title 3. Boot CDROM cdrom --init map --hook chainloader (cd0) rootnoverify (cd0) title 4. Setup WinXP map --unmap=0:0xff map --unhook root (hd0,0) savedefault 1 chainloader /XPSTP boot map --unmap=0:0xff map --unhook title 5. Setup Windows 7 map --unmap=0:0xff map --unhook savedefault 1 root (hd0,0) find --set-root /bootmgr chainloader /bootmgr boot map --unmap=0:0xff map --unhook title 6. Windows XP Recovery Console find --set-root /cmdcons/setupldr.bin chainloader /cmdcons/setupldr.bin title 7. Windows 7 Recovery Console find --set-root /iso/win7recovery32.iso map /iso/win7recovery32.iso (0xff) map --hook chainloader (0xff) boot title 8. Launch LiveXP -----> fail.fail.it launch winXP setup.folder remove already from pendrive map --unmap=0:0xff map --unhook find --set-root /minint/setupldr.bin chainloader /minint/setupldr.bin title 9. Launch MiniXP find --set-root --ignore-floppies /iso/miniXP.iso map --mem /iso/miniXP.iso (0xff) map --hook chainloader (0xff)/HBCD/XPLOADER.BIN title 10. Launch Live Win7 find --set-root --ignore-floppies /iso/Win7Live.iso map --mem /iso//iso/Win7Live.iso (0xff) map --hook chainloader (0xff)/BOOTMGR title 11. Launch WAREZ find --set-root --ignore-floppies /iso/WAREZ.iso map /iso/WAREZ.iso (hd32) map --hook chainloader (hd32) boot title 12. Virus Remover find --set-root /virusremover.lst configfile /virusremover.lst title 13. DOS map --unhook map --mem (hd0,0)/iso/dos.img (fd0) map --hook chainloader (fd0)+1 rootnoverify (fd0) title Reboot reboot title Shutdown computer halt ---------------------------------------------------------------- virusremover.lst default 0 gfxmenu = /iso/boot.gfx.gz title PREVIOUS MENU configfile /menu.lst title Kaspersky 2010 Rescue map (hd0,0)/kav/kav.iso (0xff) || map --mem (hd0,0)/kav/kav.iso (0xff) map --hook chainloader (0xff) title AVG Rescue Disk find --set-root --ignore-floppies /iso/avg.iso map /iso/avg.iso (hd32) map --hook chainloader (hd32) boot ---------------------------------------------------------------- first of all winxp n win 7 setup was built using usb multiboot 10. ive set boot.ini to launch grub4dos as default with timeout 0.(i dont know why it looks like too complicated but i love grub4dos gui) ----------------------------------------------------------------- Detail : title 4. Setup WinXP .it run great with usb2.0 support. 16min winxp installation including basic software eq avira,office,winamp,klite,adobe reader etc.) ^^Used previous winxp source that had been create using nlite.unattended. ^^Add wpi -in U:\$WIN_NT$.~LS\I386\txtsetup.sif ,add this text [sourceDisksFiles] wpi.cmd = 100,,,,,,_x,2,0,0 -in U:\$WIN_NT$.~LS\I386\wpi.cmd SET USBDRIVE= SET TAGFILE=\wpi\wpi.exe :: First Limited Range to Prevent Windows No Drive Alert due to Cardreader :: For case of Repair Install when Drive not found, than Extended Range and :: Windows No Drive Alert - Press 4x Continue for Cardreader Drives FOR %%h IN (C D M N O P Q R S T U V W X Y) DO IF EXIST "%%h:%TAGFILE%" SET USBDRIVE=%%h: if "%USBDRIVE%" == "" ( FOR %%h IN (C D E F G H I J K L M N O P Q R S T U V W X Y) DO IF EXIST "%%h:%TAGFILE%" SET USBDRIVE=%%h: ) start %USBDRIVE%wpi/wpi.exe title 5. Setup Windows 7(takes about 30min to finish full setup) -ive do nothing with this setup.just let usb multiboot 10 do it successfully title 6. Windows XP Recovery Console title 8. Launch LiveXP i dont know whats the problem with those 2 but when i run it,it goes to winxp installation (it run title 4. Setup WinXP) title 7. Windows 7 Recovery Console this iso ive download it somewhere..forgot already since too many website i download n test..its run great title 9. Launch MiniXP it is minixp extracted from WAREZ.tutorial from bootland on how to extract minixp from warez i love it because its is fast and small iso (120mb). title 10. Launch Live Win7 this iso ive download it somewhere..forgot also since too many website i download n test..its run great title 12. Virus Remover Consist of avg and kaspersky rescue cd.avg rescue run directly iso while kaspersky rescue cd need to do some adjustment for iso that had been downloaded from kaspersky website. sorry i forgot also which website guide me to do with kaspersky.i have to extract kaspersky iso,and move the folder in root directory.see above attachment.in the kav.iso ,all folder are deleted except boot folder so the kav.iso only 9.73mb. image.squashfs reside in kav folder title 13. DOS support ntfs n usb dos.img only 720kb -autoexec.bat xmsdsk.exe 30000 r: /y echo off LH NTFSDOS.EXE LH CTMOUSE LH CTMOUSE > NUL -config.sys DOS=HIGH,UMB lastdrive=Z device=HIMEM.SYS devicehigh=USBASPI.SYS /e /nocbc /norst devicehigh=DI1000DD.SYS /L:U -------------------------------------------------------------------------- Thats all my built from my little knowledge.its looks like pretty mess.i dont like my root folder structure..too much folder..i dont know how to simplify it

helo i got 2 question regarding usb multibooting hope anyone out there can help 1.How do i start winXP and Window 7 installation from usb to XXX hardrive 2.How do i continue winXP and Window 7 installation from usb to XXX hardrive after setup first phase that require booting to continue installation my current menu entry structure menu.1st title 4.Windows XP Setup map --unmap=0:0xff map --unhook savedefault find --set-root --ignore-cd /usbdrive.tag configfile /winsetup.lst title 5.Start Windows 7 Setup map --unmap=0:0xff map --unhook savedefault root (hd0,0) configfile /setupvista.lst winsetup.lst title First part of Windows XP Professional SP2 setup from pendrive map --unmap=0:0xff map --unhook map --mem (hd0,0)/ISO/XPpSP2.ISO (0xff) savedefault 2 map --hook root (0xff) chainloader /I386/SETUPLDR.BIN cat --locate=rdisk(1) --replace=rdisk(0) (0xff)/I386/TXTSETUP.SIF boot map --unmap=0:0xff map --unhook title Second part of 2000/XP/2003 setup / Boot first internal hard disk find --set-root /ntldr savedefault 2 chainloader /ntldr boot setupvista.lst title First part of Windows 7 Ultimate setup from partition pendrive map --unmap=0:0xff map --unhook root (hd0,0) savedefault 2 chainloader /bootmgr boot title Second part of Windows7 setup / Boot Virtual first internal hard disk savedefault 3 map --unmap=0:0xff map --unhook map (hd2) (hd0) map (hd0) (hd2) root (hd0,0) chainloader /bootmgr boot title Third and Fourth part of Windows7 setup / Boot first internal hard disk root (2,0) savedefault 3 #chainloader /bootmgr ********************************************************************************* ive tested those configuration on my computer..it was done successfully.in bios i set 1.boot usb pendrive---->2.Internal harddisk i am pc technician so i want configure my usb bootable to be able to do winXP or Win7 installation on any computer/laptop that have variety of bios booting priority for example computer bios that set 1.boot usb pendrive---->2.cdrom------->3.Internal harddisk

-Close thread now i know that the problem come from plpbt.bin which it cant be loaded from usb2.0 bios supported. This tell me regarding many error during win XP setup when plpbtn is loaded at laptop which already has usb2.0 support.

1st off all im very sory if my english so hard to understand I successfully create bootable usb stick using WinSetupFromUSB_1-0-beta6 on my kingston dt101 16gb.I do NTFS format. But here i got 1 major problem.refer to this condition: -Successfully do windows XP n Win7 installation -Successfully do win7 Installation after load plpbt.bin -FAIL if do winxp installation after load plpbtn.bin. The error that pop up when gonna load setup files is different error each time.sometime blank screen when gonna load setup file,sometime error loading bootinfo.inf etc etc But when i try creating usb bootable via usb multiboot10 software and load plpbtn.bin the winxp installation success Is there something i miss? now more problem arise On testing other laptop,i cant load plpbt.bin. In the middle of loading plpbt.bin process got hang. If there possibility all those problem arise if i test on pc/laptop with usb2.0 support already? ********************* from menu.1st title Launch support for USB2.0 root (hd0,0) kernel /iso/plpbt.bin title Windows XP/2000/2003 Setup map --unmap=0:0xff map --unhook savedefault find --set-root --ignore-cd /usbdrive.tag configfile /winsetup.lst title Start Vista/Win7/Server 2008 Setup or PE/Recovery ISO from partition 0 map --unmap=0:0xff map --unhook savedefault root (hd0,0) configfile /setupvista.lst ********************** from /winsetup.lst title test map --unmap=0:0xff map --unhook map --mem (hd0,0)/ISO/XPpSP2.ISO (0xff) savedefault 2 map --hook root (0xff) chainloader /I386/SETUPLDR.BIN cat --locate=rdisk(1) --replace=rdisk(0) (0xff)/I386/TXTSETUP.SIF boot map --unmap=0:0xff map --unhook *************************** from setupvista.lst color black/cyan yellow/cyan timeout 10 default /windefault title Back to Main Menu configfile /menu.lst title First part of Windows 7 Ultimate setup from partition pendrive map --unmap=0:0xff map --unhook root (hd0,0) savedefault 3 chainloader /bootmgr boot title Second part of Windows7 setup / Boot Virtual first internal hard disk map (hd2) (hd0) map --unhook rootnoverify (hd0,0) savedefault 4 chainloader /bootmgr boot title Third and Fourth part of Windows7 setup / Boot first internal hard disk root (2,0) savedefault 4 #chainloader /bootmgr ************************************* is it my setupvista.lst configuration correct?