Jump to content

7Customizer - a Windows 7 Customization and Deployment tool

blue4603
 Share

Recommended Posts


grabben

grabben

Posted
Posted (edited)
@SwedenXP

You are most welcome.

Regards

Back again!:)

Now ive tried on a swedish 32bit version of 7 Ultimate


=== 7Customizer Started===
7Customizer verion: 0.3.2
OS: Microsoft Windows NT 6.1.7600.0
OS architecture: AMD64
Work folder found: True
Mount folder found: True
Extract utility found: True
Configuration file found: True
bootorder.txt file found: True
Boot sector file found: True
Getting drive info
Free space: 7,70220184326172 GB
Getting drive info: Done
Saved Imagex path: E:\Program Files\Windows AIK\Tools\amd64\imagex.exe
Saved DISM path: E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe
Saved odcdimg path: E:\Program Files\Windows AIK\Tools\amd64\oscdimg.exe
Windows source path selected
Sources folder found
install.wim found
install.wim size: 1859 MB
Testing imagex
Imagex result begin:

ImageX Tool for Windows
Copyright © Microsoft Corp. All rights reserved.
Version: 6.1.7600.16385

Imagex result end.
Testing dism
dism result begin:

Deployment Image Servicing and Management tool
Version: 6.1.7600.16385


dism result end.
added: "E:\Program Files\Windows AIK\Tools\amd64\imagex.exe" /XML /info "E:\7work\DVD\sources\install.wim">work\imagesinfo.xml
Starting imagex
Imagex created imagesinfo.xml Successfully
Reading images information from imagesinfo.xml
First 5 lines of imagesinfo.xml
<WIM>
  <TOTALBYTES>1949906224</TOTALBYTES>
  <IMAGE INDEX="1">
    <DIRCOUNT>9661</DIRCOUNT>
    <FILECOUNT>48092</FILECOUNT>
Number of Available Images: 1
Available Images: Begin
Windows 7 Ultimate
Available Images: End
Reading info finished
Start button pressed
added: "E:\Program Files\Windows AIK\Tools\amd64\imagex.exe" /XML /info "E:\7work\DVD\sources\install.wim" 1 >work\imagesinfo.xml
Starting ImageX
Imagex created imagesinfo.xml Successfully
Reading selected image information from imagesinfo.xml
First 5 lines of imagesinfo.xml
<IMAGE INDEX="1">
  <DIRCOUNT>9661</DIRCOUNT>
  <FILECOUNT>48092</FILECOUNT>
  <TOTALBYTES>8145970107</TOTALBYTES>
  <CREATIONTIME>
Installed Language: Begin 
sv-SE
Installed Language: End 
Image Architecture: x86
Image Edition:Ultimate
Finished Reading selected image information
Preset file selected
Preset file: E:\7CT2Swe.txt
Tweaks Enabled
Preparing instructions for registry editing
added reg.exe load HKLM\7user "work\mount\Users\Default\NTUSER.DAT"
added reg.exe load HKLM\7soft "work\mount\Windows\System32\config\SOFTWARE"
added reg.exe load HKLM\7system "work\mount\Windows\System32\config\SYSTEM"
added reg.exe import "work\reg.reg"
added reg.exe unload HKLM\7user
added reg.exe unload HKLM\7soft
added reg.exe unload HKLM\7system
Finished preparing instructions for registry editing
Language Pack Selected
Reading Language Pack Info
Reading Language Pack info finished successfully and saved
Adding instruction to integrate the language pack
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /Image:"work\mount" /Add-Package /PackagePath:"E:\7work\Stuff\LP\ChineseTraditional_zh-hk x86.cab"
Finished adding instruction to integrate the language pack
Update Selected
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Finished adding instruction to integrate updates
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /Image:"work\mount" /Add-Driver  /driver:"E:\7work\Stuff\hp dml drivers" /ForceUnsigned /recurse
After apply ISO file selected
ISO file: E:\7work\7CT2Swe.iso
Added: "E:\Program Files\Windows AIK\Tools\amd64\oscdimg.exe" -u2 -m -o -l -b"work\etfsboot.com" -yo"work\bootorder.txt" "E:\7work\DVD" "E:\7work\7CT2Swe.iso"
Apply button pressed
Debug Mode: False
Creating Autounattend.xml
Finished Autounattend.xml
Prepearing instructions to execute
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /mount-wim /wimfile:"E:\7work\DVD\sources\install.wim" /index:1 /mountdir:"work\mount"
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /unmount-wim /mountdir:"work\mount" /commit
Preparing tweaks file
Finished preparing tweaks file
Starting
Finished Execution
Done. Exiting 7Customizer

Everything almost works out fine, according to the logfile above everything works out good BUT a driver for my HP 6510b laptop fails to integrate,

Its the "SoundMAX Integrated Digital HD Audio" ( http://h20000.www2.hp.com/bizsupport/TechS...Item=ob-77875-1 ). ive been told to take a look at a logfile in the windir\inf of the targetimage, where can i find that one?

Doesnt say alot in the dism log but i can provide it if you want.

Now ill test it!, ill be back soon with results:P

Edited by grabben
Link to comment
Share on other sites
Droppo

Droppo

Posted
Posted
@Droppo
Maybe add options to customize special folders... like program files, my documents, my libraries, etc which can be easily modded on registry...

I did not understand that.

Sorry, I didn't explain it right... I was saying, customize special folder paths, so you can change those folders locations. for example... let's say I want to have

My libraries ------> D:\My stuff\My libraries

My documents ---> D:\My stuff\My documents

My music ---------> D:\My stuff\My music

You can easily change that in windows registry, and would be great to have options to do it on 7Customizer

Droppo.-

Link to comment
Share on other sites
blue4603

blue4603

Posted
  • Author
Posted

@grabben

Thanks for your feedback.

Regarding drivers problems, this issue has been discussed already. These issues are not related to 7Customizer, they are related to dism. I can not help you with these issues.

Looking forward for your test results, I hope it works well with you.

@Droppo

These settings are per user. If we change these settings all users personal folders will be the same. That means the documents of all users will be in the same folder.

The folder of program files can be changed without any problems.

Regards

Link to comment
Share on other sites
grabben

grabben

Posted
Posted
@grabben

Thanks for your feedback.

Regarding drivers problems, this issue has been discussed already. These issues are not related to 7Customizer, they are related to dism. I can not help you with these issues.

Looking forward for your test results, I hope it works well with you.

Regards

Aah sorry, my bad :)

Im soon gonna try with a traditional chinese windows 7 dvd :P

And once again with the swedish to confirm.

Merry christmas guys and girls!

Link to comment
Share on other sites
grabben

grabben

Posted
Posted (edited)
@grabben

It is OK man. I appreciate your help and excitement.

Looking forward for your feedback.

Regards

Took me some time to finish downloading it, and when i was done.. it woudnt work beacuse 64bit is not supported by virtualbox and my laptop wont boot the dvd *annoyoing*

So i finished the 32bit and will ive it a try soon :P

Edit:

Allright, i got p***ed at my laptop cus it woudnt boot the chinese dvd so i ended up merging the editions of swedish and chinese dvd instead and some other stuff, but finally..

Here is a confirmation it works on a swedish dvd of 7

=== 7Customizer Started===
7Customizer verion: 0.3.2
OS: Microsoft Windows NT 6.1.7600.0
OS architecture: AMD64
Work folder found: True
Mount folder found: True
Extract utility found: True
Configuration file found: True
bootorder.txt file found: True
Boot sector file found: True
Getting drive info
Free space: 11,3785591125488 GB
Getting drive info: Done
Saved Imagex path: E:\Program Files\Windows AIK\Tools\amd64\imagex.exe
Saved DISM path: E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe
Saved odcdimg path: E:\Program Files\Windows AIK\Tools\amd64\oscdimg.exe
Windows source path selected
Windows source path selected
Sources folder found
install.wim found
install.wim size: 3355 MB
Testing imagex
Imagex result begin:

ImageX Tool for Windows
Copyright © Microsoft Corp. All rights reserved.
Version: 6.1.7600.16385

Imagex result end.
Testing dism
dism result begin:

Deployment Image Servicing and Management tool
Version: 6.1.7600.16385


dism result end.
added: "E:\Program Files\Windows AIK\Tools\amd64\imagex.exe" /XML /info "E:\7work\DVD\sources\install.wim">work\imagesinfo.xml
Starting imagex
Imagex created imagesinfo.xml Successfully
Reading images information from imagesinfo.xml
First 5 lines of imagesinfo.xml
<WIM>
  <TOTALBYTES>3518852202</TOTALBYTES>
  <IMAGE INDEX="1">
	<DIRCOUNT>9354</DIRCOUNT>
	<FILECOUNT>46461</FILECOUNT>
Number of Available Images: 9
Available Images: Begin
Windows 7 Starter
Windows 7 Home Basic
Windows 7 Home Premium
Windows 7 Professional
Windows 7 Ultimate
Windows 7 Home Basic
Windows 7 Home Premium
Windows 7 Professional
Windows 7 Ultimate
Available Images: End
Reading info finished
Start button pressed
added: "E:\Program Files\Windows AIK\Tools\amd64\imagex.exe" /XML /info "E:\7work\DVD\sources\install.wim" 5 >work\imagesinfo.xml
Starting ImageX
Imagex created imagesinfo.xml Successfully
Reading selected image information from imagesinfo.xml
First 5 lines of imagesinfo.xml
<IMAGE INDEX="5">
  <DIRCOUNT>9661</DIRCOUNT>
  <FILECOUNT>48092</FILECOUNT>
  <TOTALBYTES>8145970107</TOTALBYTES>
  <CREATIONTIME>
Installed Language: Begin 
sv-SE
Installed Language: End 
Image Architecture: x86
Image Edition:Ultimate
Finished Reading selected image information
Language Pack Selected
Reading Language Pack Info
Reading Language Pack info finished successfully and saved
Adding instruction to integrate the language pack
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /Image:"work\mount" /Add-Package /PackagePath:"E:\7work\Stuff\LP\ChineseTraditional_zh-hk x86.cab"
Finished adding instruction to integrate the language pack
Language Pack Selected
Reading Language Pack Info
Reading Language Pack info finished successfully and saved
Adding instruction to integrate the language pack
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /Image:"work\mount" /Add-Package /PackagePath:"E:\7work\Stuff\LP\English_en-us x86.cab"
Finished adding instruction to integrate the language pack
Language Pack Selected
Reading Language Pack Info
Reading Language Pack info finished successfully and saved
Adding instruction to integrate the language pack
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /Image:"work\mount" /Add-Package /PackagePath:"E:\7work\Stuff\LP\German_de-de x86.cab"
Finished adding instruction to integrate the language pack
Update Selected
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Finished adding instruction to integrate updates
Tweaks Enabled
Preparing instructions for registry editing
added reg.exe load HKLM\7user "work\mount\Users\Default\NTUSER.DAT"
added reg.exe load HKLM\7soft "work\mount\Windows\System32\config\SOFTWARE"
added reg.exe load HKLM\7system "work\mount\Windows\System32\config\SYSTEM"
added reg.exe import "work\reg.reg"
added reg.exe unload HKLM\7user
added reg.exe unload HKLM\7soft
added reg.exe unload HKLM\7system
Finished preparing instructions for registry editing
After apply ISO file selected
ISO file: E:\7work\7CT3Swe.iso
Added: "E:\Program Files\Windows AIK\Tools\amd64\oscdimg.exe" -u2 -m -o -l -b"work\etfsboot.com" -yo"work\bootorder.txt" "E:\7work\DVD" "E:\7work\7CT3Swe.iso"
Apply button pressed
Debug Mode: False
Creating Autounattend.xml
Finished Autounattend.xml
Prepearing instructions to execute
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /mount-wim /wimfile:"E:\7work\DVD\sources\install.wim" /index:5 /mountdir:"work\mount"
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /unmount-wim /mountdir:"work\mount" /commit
Preparing tweaks file
Finished preparing tweaks file
Starting
Finished Execution
Done. Exiting 7Customizer

Soon chinese will come.

Btw when is the next version coming? :) If you might have a slight idea of date :P

Edit again:p.

Here's the chinese version as i promised:). Working perfectly, as always i choosed 7 Ultimate 32bit

Worked flawless. Just somethin im little curious about, the unattended part.

Im pretty sure i set the keyboardlanguage to swedish but it didnt set it after install.. but ill take closer look at it. Goodnite folks!

=== 7Customizer Started===
7Customizer verion: 0.3.2
OS: Microsoft Windows NT 6.1.7600.0
OS architecture: AMD64
Work folder found: True
Mount folder found: True
Extract utility found: True
Configuration file found: True
bootorder.txt file found: True
Boot sector file found: True
Getting drive info
Free space: 14,6925621032715 GB
Getting drive info: Done
Saved Imagex path: E:\Program Files\Windows AIK\Tools\amd64\imagex.exe
Saved DISM path: E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe
Saved odcdimg path: E:\Program Files\Windows AIK\Tools\amd64\oscdimg.exe
Windows source path selected
Sources folder found
install.wim found
install.wim size: 3572 MB
Testing imagex
Imagex result begin:

ImageX Tool for Windows
Copyright © Microsoft Corp. All rights reserved.
Version: 6.1.7600.16385

Imagex result end.
Testing dism
dism result begin:

Deployment Image Servicing and Management tool
Version: 6.1.7600.16385


dism result end.
added: "E:\Program Files\Windows AIK\Tools\amd64\imagex.exe" /XML /info "E:\7work\DVD\sources\install.wim">work\imagesinfo.xml
Starting imagex
Imagex created imagesinfo.xml Successfully
Reading images information from imagesinfo.xml
First 5 lines of imagesinfo.xml
<WIM>
  <TOTALBYTES>3746077798</TOTALBYTES>
  <IMAGE INDEX="1">
    <DIRCOUNT>9547</DIRCOUNT>
    <FILECOUNT>47263</FILECOUNT>
Number of Available Images: 9
Available Images: Begin
Windows 7 簡易版
Windows 7 家用入門版
Windows 7 家用進階版
Windows 7 專業版
Windows 7 旗艦版
Windows 7 家用入門版
Windows 7 家用進階版
Windows 7 專業版
Windows 7 旗艦版
Available Images: End
Reading info finished
Start button pressed
added: "E:\Program Files\Windows AIK\Tools\amd64\imagex.exe" /XML /info "E:\7work\DVD\sources\install.wim" 5 >work\imagesinfo.xml
Starting ImageX
Imagex created imagesinfo.xml Successfully
Reading selected image information from imagesinfo.xml
First 5 lines of imagesinfo.xml
<IMAGE INDEX="5">
  <DIRCOUNT>9863</DIRCOUNT>
  <FILECOUNT>48966</FILECOUNT>
  <TOTALBYTES>8417857023</TOTALBYTES>
  <CREATIONTIME>
Installed Language: Begin 
zh-TW
Installed Language: End 
Image Architecture: x86
Image Edition:Ultimate
Finished Reading selected image information
Language Pack Selected
Reading Language Pack Info
Reading Language Pack info finished successfully and saved
Adding instruction to integrate the language pack
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /Image:"work\mount" /Add-Package /PackagePath:"E:\7work\Stuff\LP\Swedish_sv-se x86.cab"
Finished adding instruction to integrate the language pack
Update Selected
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Finished adding instruction to integrate updates
Tweaks Enabled
Preparing instructions for registry editing
added reg.exe load HKLM\7user "work\mount\Users\Default\NTUSER.DAT"
added reg.exe load HKLM\7soft "work\mount\Windows\System32\config\SOFTWARE"
added reg.exe load HKLM\7system "work\mount\Windows\System32\config\SYSTEM"
added reg.exe import "work\reg.reg"
added reg.exe unload HKLM\7user
added reg.exe unload HKLM\7soft
added reg.exe unload HKLM\7system
Finished preparing instructions for registry editing
Language Pack Selected
Reading Language Pack Info
Reading Language Pack info finished successfully and saved
Adding instruction to integrate the language pack
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /Image:"work\mount" /Add-Package /PackagePath:"E:\7work\Stuff\LP\English_en-us x86.cab"
Finished adding instruction to integrate the language pack
Presest save selected
Presest save file: E:\7work\Stuff\LP\7ct4tw32.txt
After apply ISO file selected
ISO file: E:\7work\7CT4tw.iso
Added: "E:\Program Files\Windows AIK\Tools\amd64\oscdimg.exe" -u2 -m -o -l -b"work\etfsboot.com" -yo"work\bootorder.txt" "E:\7work\DVD" "E:\7work\7CT4tw.iso"
Apply button pressed
Debug Mode: False
Creating Autounattend.xml
Finished Autounattend.xml
Prepearing instructions to execute
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /mount-wim /wimfile:"E:\7work\DVD\sources\install.wim" /index:5 /mountdir:"work\mount"
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /unmount-wim /mountdir:"work\mount" /commit
Preparing tweaks file
Finished preparing tweaks file
Starting
Finished Execution
Done. Exiting 7Customizer

Edited by grabben
Link to comment
Share on other sites
blue4603

blue4603

Posted
  • Author
Posted

@grabben

Nice work man. I have a question for you

After the execution finished, did 7Customizer created the ISO file?

I have tried it yesterday but it did not create an ISO.

Btw when is the next version coming? If you might have a slight idea of date

Nope. Since I am very busy these days, the next version might be late (it might be at the end of this week).

Im pretty sure i set the keyboardlanguage to swedish but it didnt set it after install..

Hmmm. You can make sure by opening the ISO file and check autounattend.xml or check the preset file to make sure. If 7Customizer did not set the keyboard language correctly, then tell me which keyboard language you chose and I will correct it in the next release.

Thanks man for your feedback and help. It saved me lots of time and it confirmed (pedilover also helped me on this) that 7Customizer actually works on non-English installation sources.

Regards

Link to comment
Share on other sites
grabben

grabben

Posted
Posted (edited)
@grabben

Nice work man. I have a question for you

After the execution finished, did 7Customizer created the ISO file?

I have tried it yesterday but it did not create an ISO.

Nope. Since I am very busy these days, the next version might be late (it might be at the end of this week).

Hmmm. You can make sure by opening the ISO file and check autounattend.xml or check the preset file to make sure. If 7Customizer did not set the keyboard language correctly, then tell me which keyboard language you chose and I will correct it in the next release.

Thanks man for your feedback and help. It saved me lots of time and it confirmed (pedilover also helped me on this) that 7Customizer actually works on non-English installation sources.

Regards

Its really sweet :D Noproblem at all, just glad i can help:)

Hm ur right, ill check the unattended file..yea i let 7costumizer create the iso, i picked apply and directly after create the iso...

Guessing this is it ?

<SetupUILanguage>
  <UILanguage>zh-TW</UILanguage> 
  </SetupUILanguage>
  <UILanguage>en-US</UILanguage> 
  <UserLocale>sv-SE</UserLocale>

Dvdlanguage and setuplanguage is chinese

UIlanguage, is that after the setup and at the desktop?

userlocale, must be keyboard layout? :P

Im not completely sure, maybe i had an untouched version on the dvd, i burned it to a dvd and tried it on my laptop, felt better then a virtual machine so i will have to make sure bout this first.

Edit.. (**** hate these edits:p)

Anyways, i now tried my touched win7 zh-tw iso and no it doesnt set the swedish keyboardlayout (i havent altered the keyboard/languagesettings before install either).

it keeps the chinese one..

Is it possible for you to make sure 7C changes to whatever languagepack and keypoardsettings u picked automatically so i/we/u dont have to go to controlpanel after setup?.

Edited by grabben
Link to comment
Share on other sites
blue4603

blue4603

Posted
  • Author
Posted

@grabben

Its really sweet biggrin.gif Noproblem at all, just glad i can help:)

Thanks.

yea i let 7costumizer create the iso, i picked apply and directly after create the iso...

Hmmm, I need to check why 7Customizer did not created an iso for me.

Guessing this is it ?

Yup.

UIlanguage, is that after the setup and at the desktop?

The language for the interface. You could choose it after the installation has finished.

userlocale, must be keyboard layout?

Nope. Userlocale is for country, currency date and time format .... etc settings

The one for the keyboard is InputLocale.

Im not completely sure, maybe i had an untouched version on the dvd, i burned it to a dvd and tried it on my laptop, felt better then a virtual machine so i will have to make sure bout this first.

I recommend you test it on a virtual machine it will saves you lots of time and a couple of DVDs.

Anyways, i now tried my touched win7 zh-tw iso and no it doesnt set the swedish keyboardlayout (i havent altered the keyboard/languagesettings before install either).

it keeps the chinese one..

Is it possible for you to make sure 7C changes to whatever languagepack and keypoardsettings u picked automatically so i/we/u dont have to go to controlpanel after setup?.

Hmmm, regarding the language pack, you need to select it after the installation. Regarding the keyboard settings, I have tested it so many times and it works fine. However, I will check that one more time.

Thanks for your help and feedback and discussion. I really appreciate it.

Regards.

Link to comment
Share on other sites
grabben

grabben

Posted
Posted (edited)
@grabben

Thanks.

Hmmm, I need to check why 7Customizer did not created an iso for me.

Yup.

The language for the interface. You could choose it after the installation has finished.

Nope. Userlocale is for country, currency date and time format .... etc settings

The one for the keyboard is InputLocale.

I recommend you test it on a virtual machine it will saves you lots of time and a couple of DVDs.

Hmmm, regarding the language pack, you need to select it after the installation. Regarding the keyboard settings, I have tested it so many times and it works fine. However, I will check that one more time.

Thanks for your help and feedback and discussion. I really appreciate it.

Regards.

Anytime Blue:)

Hm, i must take a look at it myself, maybe i missed something. I know i can change LP after setup just would be nice if it could do it auto :P

Ofcourse, im always testing on a virtual machine first, but i got dvdrw discs and some space on my laptop, plus my comp isnt the best....

Edited by grabben
Link to comment
Share on other sites
grabben

grabben

Posted
Posted
@grabben
Hm, i must take a look at it myself, maybe i missed something. I know i can change LP after setup just would be nice if it could do it auto

Yup. That is planned for future release.

Regards

Yea saw that a few hrs after:p

Uhm i got a problem loading my preset (Pre32.txt)..

Im getting this error


See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ArgumentOutOfRangeException: InvalidArgument=Value of '2' is not valid for 'SelectedIndex'.
Parameter name: SelectedIndex
   at System.Windows.Forms.ComboBox.set_SelectedIndex(Int32 value)
   at _7Customizer.Form1.loadToolStripMenuItem_Click(Object sender, EventArgs e)
   at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
   at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e)
   at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
   at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
   at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
   at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ToolStrip.WndProc(Message& m)
   at System.Windows.Forms.ToolStripDropDown.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
7Customizer
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///E:/7work/7Customizer.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

So this would be the details of the error, not sure what it is, if its related to 7c or just my computer.

Link to comment
Share on other sites
grabben

grabben

Posted
Posted
@grabben
Uhm i got a problem loading my preset (Pre32.txt)..

Im getting this error

Hmmm I think I know the problem. Could you post your preset and your log.

Thanks for the feedback.

Regards

Absolutely:)

Here's my preset:

enabletweaks=true
showextfiletypes=true
showhidden=true
showsystemfiles=false
hidedesktopicon=true
compressedcolor=true
disabletips=true
mapdrivebtn=false
separateprocess=false
usecheckboxes=false
showmenus=false
foldersizeinfotip=false
hideemptydrives=false
restorefolderswindows=false
usesharingwizard=true
disableaeroshake=false
disableaerosnap=false
lowdiskspace=true
showstatusbar=true
autoendtask=true
brokenshortcutsresolve=false
internetopenfile=false
computer=1
showconnectto=true
cp=1
removeprogsdefuault=true
removedevices=true
documents=1
downloads=3
disabledragndrop=false
showfavs=false
games=3
removehelp=true
highlightnewprogs=true
showhomegroup=true
music=3
shownetwork=true
opensubmenus=false
personalfolder=1
pictures=3
showrecent=false
recordedtv=3
showrun=false
startsearchfiles=false
sortprogs=false
usesmallicons=true
videos=3
storerecentprogs=true
storerecenttask=true
powerbtnaction=0
unlocktaskbar=false
taskbarsmallicons=true
disableaeropeek=false
taskbarbtns=0
uaclevel=4
autorestartfailure=true
dumpfailure=true
makeunattended=true
skipproductkey=true
accepteula=true
hidewireless=true
networklocation=0
protectyourpc=0
skipuser=true
userName=test
password=1234
fName=andreas
orgName=none
cName=testpc
uilanguage=2
timecurrency=180
kbinput=123
timezone=0
AxInstSV=3
SensrSvc=4
AeLookupSvc=3
AppIDSvc=3
Appinfo=3
ALG=3
AppMgmt=3
BITS=3
BFE=2
BDESVC=4
wbengine=3
bthserv=3
PeerDistSvc=4
CertPropSvc=4
KeyIso=3
EventSystem=2
COMSysApp=3
Browser=3
VaultSvc=4
CryptSvc=2
UxSms=2
Dhcp=2
defragsvc=4
TrkWks=2
MSDTC=3
Dnscache=2
EFS=3
EapHost=3
Fax=4
fdPHost=3
FDResPub=2
hkmsvc=3
HomeGroupListener=3
HomeGroupProvider=3
hidserv=3
IKEEXT=3
UI0Detect=3
SharedAccess=4
iphlpsvc=4
PolicyAgent=3
KtmRm=3
lltdsvc=3
Mcx2Svc=4
MSiSCSI=4
swprv=3
MMCSS=2
NetTcpPortSharing=4
Netlogon=3
napagent=3
Netman=3
netprofm=3
NlaSvc=2
nsi=2
CscService=4
WPCSvc=4
PNRPsvc=3
p2psvc=3
p2pimsvc=3
pla=3
IPBusEnum=3
PNRPAutoReg=3
WPDBusEnum=3
Power=2
Spooler=4
wercplsupport=3
PcaSvc=3
ProtectedStorage=3
QWAVE=3
RasAuto=3
RasMan=3
SessionEnv=3
TermService=3
UmRdpService=3
RemoteRegistry=3
RemoteAccess=4
RpcEptMapper=2
seclogon=3
SstpSvc=3
wscsvc=1
LanmanServer=2
ShellHWDetection=2
SCardSvr=4
SCPolicySvc=4
SNMPTRAP=4
sppsvc=1
SSDPSRV=3
SysMain=2
SENS=2
TabletInputService=4
Schedule=2
lmhosts=2
TapiSrv=3
Themes=2
THREADORDER=3
TBS=3
upnphost=3
ProfSvc=2
vds=3
VSS=3
WebClient=3
Audiosrv=2
AudioEndpointBuilder=2
SDRSVC=3
WbioSrvc=4
idsvc=3
WcsPlugInService=3
wcncsvc=4
WinDefend=1
wudfsvc=3
WerSvc=4
Wecsvc=3
eventlog=2
MpsSvc=2
FontCache=3
StiSvc=3
msiserver=3
Winmgmt=2
ehRecvr=4
ehSched=4
WMPNetworkSvc=4
WinRM=4
WSearch=1
W32Time=3
wuauserv=1
WinHttpAutoProxySvc=3
dot3svc=3
Wlansvc=3
wmiApSrv=3
LanmanWorkstation=2
WwanSvc=3

And im guessing you want the logfile of 7C?

*Seems like i dont have that particular logfile, i only got one from a test earlier today but not sure.. but well ill post it anyway:

=== 7Customizer Started===
7Customizer verion: 0.3.2
OS: Microsoft Windows NT 6.1.7600.0
OS architecture: AMD64
Work folder found: True
Mount folder found: True
Extract utility found: True
Configuration file found: True
bootorder.txt file found: True
Boot sector file found: True
Getting drive info
Free space: 6,93203353881836 GB
Getting drive info: Done
Saved Imagex path: E:\Program Files\Windows AIK\Tools\amd64\imagex.exe
Saved DISM path: E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe
Saved odcdimg path: E:\Program Files\Windows AIK\Tools\amd64\oscdimg.exe
Windows source path selected
Sources folder found
install.wim found
install.wim size: 3572 MB
Testing imagex
Imagex result begin:

ImageX Tool for Windows
Copyright © Microsoft Corp. All rights reserved.
Version: 6.1.7600.16385

Imagex result end.
Testing dism
dism result begin:

Deployment Image Servicing and Management tool
Version: 6.1.7600.16385


dism result end.
added: "E:\Program Files\Windows AIK\Tools\amd64\imagex.exe" /XML /info "E:\7work\DVD\sources\install.wim">work\imagesinfo.xml
Starting imagex
Imagex created imagesinfo.xml Successfully
Reading images information from imagesinfo.xml
First 5 lines of imagesinfo.xml
<WIM>
  <TOTALBYTES>3746077798</TOTALBYTES>
  <IMAGE INDEX="1">
    <DIRCOUNT>9547</DIRCOUNT>
    <FILECOUNT>47263</FILECOUNT>
Number of Available Images: 9
Available Images: Begin
Windows 7 簡易版
Windows 7 家用入門版
Windows 7 家用進階版
Windows 7 專業版
Windows 7 旗艦版
Windows 7 家用入門版
Windows 7 家用進階版
Windows 7 專業版
Windows 7 旗艦版
Available Images: End
Reading info finished
Start button pressed
added: "E:\Program Files\Windows AIK\Tools\amd64\imagex.exe" /XML /info "E:\7work\DVD\sources\install.wim" 5 >work\imagesinfo.xml
Starting ImageX
Imagex created imagesinfo.xml Successfully
Reading selected image information from imagesinfo.xml
First 5 lines of imagesinfo.xml
<IMAGE INDEX="5">
  <DIRCOUNT>9863</DIRCOUNT>
  <FILECOUNT>48966</FILECOUNT>
  <TOTALBYTES>8417857023</TOTALBYTES>
  <CREATIONTIME>
Installed Language: Begin 
zh-TW
Installed Language: End 
Image Architecture: x86
Image Edition:Ultimate
Finished Reading selected image information
Language Pack Selected
Reading Language Pack Info
Reading Language Pack info finished successfully and saved
Adding instruction to integrate the language pack
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /Image:"work\mount" /Add-Package /PackagePath:"E:\7work\Stuff\LP\English_en-us x86.cab"
Finished adding instruction to integrate the language pack
Language Pack Selected
Reading Language Pack Info
Reading Language Pack info finished successfully and saved
Adding instruction to integrate the language pack
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /Image:"work\mount" /Add-Package /PackagePath:"E:\7work\Stuff\LP\Swedish_sv-se x86.cab"
Finished adding instruction to integrate the language pack
Update Selected
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Reading update Info
Update info finished successfully and saved
Finished adding instruction to integrate updates
Tweaks Enabled
Preparing instructions for registry editing
added reg.exe load HKLM\7user "work\mount\Users\Default\NTUSER.DAT"
added reg.exe load HKLM\7soft "work\mount\Windows\System32\config\SOFTWARE"
added reg.exe load HKLM\7system "work\mount\Windows\System32\config\SYSTEM"
added reg.exe import "work\reg.reg"
added reg.exe unload HKLM\7user
added reg.exe unload HKLM\7soft
added reg.exe unload HKLM\7system
Finished preparing instructions for registry editing
After apply ISO file selected
ISO file: E:\7work\7CTw5.iso
Added: "E:\Program Files\Windows AIK\Tools\amd64\oscdimg.exe" -u2 -m -o -l -b"work\etfsboot.com" -yo"work\bootorder.txt" "E:\7work\DVD" "E:\7work\7CTw5.iso"
Apply button pressed
Debug Mode: False
Creating Autounattend.xml
Finished Autounattend.xml
Prepearing instructions to execute
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /mount-wim /wimfile:"E:\7work\DVD\sources\install.wim" /index:5 /mountdir:"work\mount"
Added: "E:\Program Files\Windows AIK\Tools\amd64\Servicing\Dism.exe" /unmount-wim /mountdir:"work\mount" /commit
Preparing tweaks file
Finished preparing tweaks file
Starting
Finished Execution
Done. Exiting 7Customizer

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...