ebin25

I have followed the many tutos on this site to the "T." Everything installs properly, but I am still asked for a reg key!!!! I exported the zonesettings.xml file, the reg files, and used the /lickey switch. Where could the key be stored???? Help. EDIT: I looked for all the files (.dat and so forth) and came up empty. They must have changed where the key is stored.

thanks

Install everything the way you want it in FF. Use SOF and create an sfx from %appdata%\Mozilla. EDIT: I am having problems with FF 2.0.0.1 and SOF. I am still using the sfx method.

I know I can use a graphics card and 150GB Raptor. X-mas is coming?!?

You should google b4 asking here. Run the installer with /r /f1”c:\setup.iss” After the install is complete, grab setup.iss from c.

create your setup.iss. Put the installer and setup.iss in a folder named JAD, then use winrar ;The comment below contains SFX script commands Path=%temp% SavePath Setup=%temp%\JAD\install.exe -S -f1%temp%\JAD\setup.iss Silent=1 Overwrite=1 I asked around how to do this for quite a while when i first started here and NEVER got an answer.I came up with this method after some trial and error. And if you dont feel like doing it yourself, Get it HERE OR HERE (this is NOT warez... it is Jad basic (freeware version.)

ms is founded on piracy... making it the biggest pirates of them all.

Vista was purposely leaked. It's cheap advertising. The (internet) media eats this stuff up... everyone from the little girls crying about not getting their MSDN copy 1st to the raving pirates on torrent sites and newsgroups knows that vista is about to be released. And, to be honest, if you plan to buy the OS when it does come out, what's the harm (besides it being [technically] illegal.) Mr Bill Gates (and his nifty MS team ) even provided the temporary crack and key

I have an Asus A8N-SLI Premium. EDIT: Just installed XP Pro SP2 with same results. I am going to flash bios with the latest (beta) version. EDIT#2: Installed beta bios and WHAM!!! I could not oc prior to bios update. I am at 2.8 and 34c. Noticed a HUGE difference. thanks for advise uvmain.

I didn't ask for help with my terminology..... let me be as anal with it as I can... AMD Athlon 64 FX-60 / 2MB Cache / 2000MHz FSB / Socket 939 / Hyper-Transport / Dual-Core / Processor In addition, I updated bios, looked for vista drivers, and reinstalled vista. Now, I am asking here.

yesterday, I had an AMD x2 4400+ installed and recognized by vista. Today, I have an AMD x2 FX-60 and this is what I see Any suggestions?

answered my own question

thanks for answering my question...... I could have done without the lecture though.

I recently started using MCE. I love it so far with one small exception. After opening MCE (on my secondary display [TV,]) I cannot get mouse control back to my primary display (Monitor.) I would like to perform more tasks than only watching a video or flipping channels. Is there a hotkey to get my mouse back on my primary desktop, or am I stuck with the mouse in mce until I close the application? Settings include: svideo connected TV (secondary Display) DVI connected LCD Monitor (primary) to get MCE to open on my tv, I simply opened the app and drug it over onto the tv. (I am running a duaview setup)

SOLVED: I bought a (long needed) Antec 550W PSU, and brought the water cool unit out of the woodwork. CPU temp is way down, and no more overheating video card. All issues have disappeared. Thanks for all help and suggestions. seems that vista is just a bit more demanding than xp, so my hardware was working overtime. watercooling my cpu, video card, and hd was just the medicine it needed. I was barking up the wrong tree with driver issues.

Problems only started when switched to vista.... but i will rip the card out and clean it up as well as I can (no duster on hand) furthermore, I could not find vista drivers for my mobo (A8n SLI-Premium) Any help locating these drivers woul dbe appreciated. I am off to clean the card brb EDIT: Cleaned Card... and it was dirty (funny cause I dont have any pets.) I removed the plate from around the fan, and blew all the dust out until I almost passed out. Its as clean as any duster would have gotten it. Still suffering from same issue. (Overheating issue may be resolved... too early to tell.) I will continue searching for chipset drivers, but I doubt I will have any luck. Help in this matter would be appreciated.

I cannot find Vista RTM drivers (even beta.) I assume this is why I keep getting black screen with an error message saying display drivers have stopped responding. Can you confirm that the drivers are the problem, or offer a solution? (I have located Vista RC1 and RC2 x86 and x64 drivers.... but NOT RTM) Video card keeps overheating as well. it is a eVGA GeForce 6800 GT 256MB DDR3 PCI Express x16 (single card only, no sli) In addition, Media Center flickers really bad. This may be because of video drivers, but not sure. I just visited Nvidia web site. They have drivers for RC1, RC2, x86 and x64.... but nothing for RTM. Could this be the cause? I just want to make sure that its my card b4 spending $600 on a sli configuration.

my only real complaint is visual tweaks.... except, of course, when tweaking XP x64 (then, NOTHING really goes right.)

Does anyone know where I can find an x64 driverpack? Or do I just start searching the globe for all teh drivers I can find.?

does anyone have reg tweaks for IE7 final to get rid of activX control, pop up blocker and notification of download competion? I HATE seeing this: I tweaked these settings in nlite, but they are of no use when installing IE7 via runonceEX.

the screenshot was taken after i manually set the visual effects. the trouble is applying these settings via reg tweaks or any other method. I do not know how to set the effects in a pre install enviornment... and i I said b4, nlite is not working for me. It seems to ignore all my visual tweaks.

Nlite visual effects are not working for me. Can I use reg tweaks or other methods to get the following results upon install? I also want cleartype enabled upon first boot. I think this should do cleartype..... added at cmdlines.txt [HKEY_CURRENT_USER\Control Panel\Desktop] "FontSmoothing"="2" "FontSmoothingType"=dword:00000002 [HKEY_USERS\.DEFAULT\Control Panel\Desktop "FontSmoothing"="2" "FontSmoothingType"=dword:00000002

Yeah... I guess I should have posted that I could silently install.... just not silently register (even when merging my [HKEY_CURRENT_USER\Software\DVDAuthorPro] info.

EDIT: Anyone who can silently install and register DVD-Lab Pro, please teach me.