
hulkviper
Content Type
Profiles
Forums
Events
Posts posted by hulkviper
-
-
Whats wrong with nLite?
You seem to have issues with nLite, coz of how you behave here.........
0 -
-
-
Thanks,
"It's even a bigger mess if you choose what you do not need"
It means, that nuhi creates his nlite in a way that only removes some files from the instalation,
it means there is no way to slice windows properly -
- nuhi is just finding files, that can be useing by some aplication or service of windows and let them to remove?
I used to think, windows are modular ...
So, I have a lot of hotfixes (some Czech pack - cca 80 MB), but I really don't know, what they are parts of (for which part of windows).
Btw. - are Czech hotfixes supported by nlite (integrated), or are they only installed during windows installation?
no matter what language.
If you have the same source as your hotfix it will be OK!
Sounds as if you say that it's nuhis job, as far as I know it isn't!
He tries his best to keep new hotfixes supported.
You said:
It means, that nuhi creates his nlite in a way that only removes some files from the instalation,
it means there is no way to slice windows properly -
nLite does not only remove files, also reg keys
windows properly, what that means for you I do not know.
If everything is removed, what else is left
nuhi isn't alone, many here help him.
0 -
What if I have some hotfix, which was replaced with some newer, but I don't know it and I let to integrate both with nlite. What will happen?
nLite always choose the newer files.
If a file is newer in your windows install source, then nLite will use that file instead of the older file of the hotfix.
But that is something you have to keep track of.
Just integrate the hotfixes you need!
What do you mean by: "New unsupported hotfixes are set to run during the windows install" ?Direct integration means:
reg keys and newer files are added to the windows install source
This saves space.
A newer hotfix that is not supported, will be set to update your source when you install windows.
During install process!
A hotfix that is not supported is copied to your windows source folder I386\svcpack
Then you see the setup
example
KB911562.exe
means direct integration was not sucessful!
if you see KB911562.ca_
that means direct integration was sucessful
try enabling Display reports for hotfixes and then you will see.
Hotfix section
Advanced
check Display reports
then you can choose if you want to set unsupported hotfixes to install at windows install or not.
It will also install hotfixes (during the windows install) for parts of Windows, that I've removed by nlite?E. g. - if I remove Windows Media Player - any hotfix for it, wich I'll integrate by nlite will be installed on nonexistent W. M. P. ?
It will do a big mess ...
It's even a bigger mess if you choose what you do not need
But it wont do what you think it will.
This question is better suited for nuhi
0 -
Hotfixes, Direct integration:
German hotfixes to German windows source
English hotfixes to English windows source
etc.....
there are some multi lang
example, WindowsInstaller-KB893803-v2-x86.exe
If a newer hotfix comes out and isn't supported by the latest nLite.
Report and wait for new release of nLite, which probably will support it.
New unsupported hotfixes are set to run during the windows install.
0 -
kelaniz, I have the similar issue.
Probably because windows installs the drivers for your card after windows installation.
I would also like to know this and a bit more.
I need to know how to set my screen resolution to 1600x1200 72Hz
1600x1200 I know, but custom frequency I don't, isn't possible in windows for me.
Can only choose 50, 60, 70
The graphic card does not find the monitor, it shows as standard.
Now I am usin PowerStrip, but is this possible to set manually?
0 -
site down?
in nLite
Ye, I think it's coz nuhi changed host.
0 -
-
I see you use WinSnap, try FastStone Capture (much better)
http://www.faststone.org/FSCaptureDetail.htm
At least this way you will get correct screenshots.
Here are my settings, good for takin screenshots fast
I recommend the output way
Output -> To File (Auto Save)
Then you do not have to save etc, it does it by itself!
0 -
0d14r3 is right, more specific info!
It's allmost as if you said, hey, I have a problem, how can I fix it.......
0 -
Thank you nuhi!
0 -
Be careful with this, try in a virtual machine first!
http://www.msfn.org/board/index.php?showtopic=69096
I have tried this and it did not always work as it should!
0 -
-
Why not just install the needed drivers from each manufacture?
For hardware info Everest is very good!
Download:
http://www.lavalys.com/products/download.p...=UE〈=en
Always keep a backup of the driver in the future!
About OEM, if you have original OEM do not switch to Corporate!
If not, go ahead
With Corporate you do not need to call MS and register windows, but with OEM and Retail you have to.
0 -
-
It's very important that you know if you have Retail, Corporate or OEM version!
0 -
nice tool, but FastStone Capture is better
http://www.faststone.org/FSCaptureDetail.htm
But, both are very good!
Here are my settings, good for takin screenshots fast
0 -
-
Why not try FairUse4WM?
It will help you with WM files
See your personal message inbox
0 -
jaclaz, it's perfect!
I use only VirtualBox.
Used VmWare before, a few motnhs ago.
VitualBox is the best if you only need to see that you OS will work.
0 -
You were in a bit of a hurry
µTorrent 1.6.1 build 490
is the latest
0 -
no it wont!
I always remove Old CDPlayer and Sound Recorder and the volume control is always there.
0 -
0
Direct Integration support
in nLite
Posted · Edited by hulkviper
Yes, nLite will tell you if the hotfix is supported if you have Display Reports checked
the best way is to download of Microsoft.
then you know what you need.
Why try
A good tool to easy download important hotfixes is Windows Updates Downloader
http://wud.jcarle.com/
Download
Windows Updates Downloader 2.25 WUD225B886Setup.exe
Check what windows you need in product
Czech is included as you can see