Jump to content


  • Posts

  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    United States

Everything posted by charles__

  1. Thanks I was looking for a system info program and found this one it works great. It is stand alone so no need to install anything in the system. http://www.gtopala.com/ http://www.gtopala.com/download.html
  2. Has anyone used this site? http://www.pricelessware.org/thelist/sys.htm
  3. Have you check the device manager in safe mode to see if there is any problems device. Are you trying to install 98 with other hardware connected to the pc like a printer or other devices? http://h10025.www1.hp.com/ewfrf/wc/softwar...Pessario%202240 Might try disabling the sound card,modem in the device manager and see if it will boot
  4. Good place here for drivers also http://www.driverheavendownloads.net/ Might also try this program to find out unknown devices. http://www.softpedia.com/get/System/System...dentifier.shtml http://www.zhangduo.com/udi.html http://support.microsoft.com/kb/298837/en-us http://support.microsoft.com/kb/275499/en-us
  5. Have you tried going into the Bios and disable any ports that are not being used, if you do not have a printer connected to this pc disable the printer port.game port,serial port,usb in not being used.
  6. Here is the Recommended System Requirements http://www.ati.com/gitg/promotions/rct3/index.html I see there is some patches on there web site. http://www.uk.atari.com/index.php?pg=product&id=81
  7. You might go to options,security and see if there is a check mark next to (do not allow attachment to be saved or open if they could contain a virus.
  8. charles__


    Did you read this. * It is not assured to work on Windows 98/98SE/Me. http://sylpheed.sraoss.jp/en/download.html http://sylpheed.sraoss.jp/en/requirement.html There is no plan to support Windows 95/98/98SE/Me for now
  9. Would this driver work? http://soundcard.free-driver-download.com/...SE-2000-XP.html
  10. Good to hear they are going to fix it for you but it should of been install correctly before they sent it back to you. I use to be a mod on modemsite.com and from what you have posted they just did not install the modem correctly. Some modem are installed first than a reboot windows will find new hardware and you just point it to the drivers or hit cancel and run the setup.exe in the drivers. You always remove the drivers first and shut down to remove any hardware. From what I see on MSN System Requirements the other should of been fine. http://join.msn.com/dialup/requirements
  11. Go to dial up folder right click your connection icon go properties,make sure your modem is listed in the connect using window. Do you have the drivers that came with the modem? You can not use the add new hardware to install the modem. These software modem use software ports not hardware ports. Two things you might try,one would be uninstall the modem drivers ,shut down and put modem in other pci slot,boot up and when windows finds new hardware install the drivers.If com port2 is listed in the device manger this is the hardware port and some modems have in the inf file to install to this port but windows think it is already in use and will not install the modem so you need to go into the bios and disable com port 2 and reinstall the modem in the same pci slot or you might just disable com port2 in the device manager,uninstall the modem drivers,reboot and when windows finds new hardware install the drivers. one more thing to check is the modem install instruction that came with your modem. Some modems with the agree chip set or lucent need the drivers installed first and there drivers have a setup.exe in the drivers,if the modem is already in the pci slot what needs to be done is remove the drivers,reboot and when windows finds new hardware click cancel until you get to the deck top,install the drivers from the setup.exe and it will install the modem. These drivers should work with your modem. before using them check the version that you have. These are the 8.30 only us them if it is an upgrade to the drivers you have if you have like 8.17 or so on. Check the drivers version because Lt modem have other chipset that use other drivers. Do you have the make and model of this modem. http://www.agere.com/entnet/modem_driver2.html
  12. Might be an irq conflict with other device,might try the modem in other pci slot. Right click My computer,properties,device manger,double click computer at top,make sure irg is picked. check to see if the modem is sharing an irq with other device.
  13. What are you showing in device manager for the modem? Did you uninstall the drivers for the old modem in the add remove program. Do you have any old dialup connection in the dialup folder? What is the make and model of the new modem and is it a pci modem? Go to the control panel,modems,diagnostics, is there more than one modem listed? High light the modem and click more info. If the old modem is still listed and still in the pc go the device manager and disable it for now and then latter you need to uninstall the drivers to the modem first then shutdown and remove the modem itself. Always remove the software first than the hardware.
  14. spybot would not be a problem but registry cleaner would. might remove smileysource.exe also. http://www.fbmsoftware.com/spyware-net/pro...ource_exe/1663/ If you are getting an error on a program that you use just uninstall the program and reinstall it. Might also clean out your windows temp folder. If you have any adware that is there it will reinstall after you reboot. If you have installed and unistalled alot of program over the years they leave behind alot junk. Might install RegCleaner and run. http://www.321download.com/LastFreeware/in...html#RegCleaner
  15. Might also check into the Motherboard Battery. http://www.hardwaresecrets.com/article/81
  16. Dr. Mac From what i have seen PQSC v. 2.07 was for windows me
  17. Looks like you hve some spyware or adware on this pc. Do you have spybot installed or ad adware this is one of the progarms that might be giving you trouble it is called Registry Cleaner http://www3.ca.com/securityadvisor/pest/pe...px?id=453097339 Might also try this one to remove. http://www.spywareterminator.com/
  18. http://www.msfn.org/board/index.php?showtopic=80688 Go down to rainyd Chozo4 - you can run Cool'n'Quiet technology on Win98SE using a WinME driver: http://www.amd.com/us-en/Processors/Techni...71_9706,00.html
  19. Have not tried none of these but might go down to the middle of the page http://www.agecon.msstate.edu/helpsite/pro...ograms_Page.htm
  20. Might look at this. http://www.computerhope.com/issues/ch000293.htm#20 http://support.microsoft.com/kb/129971/EN-US/
  21. If your not using the network card I would diable it in device manager.erpdude8 thanks for covering my behind I was in a hurry that night.
  22. To reinstall dial-up you need to good to add/remove and then windows setup,high light communication then click details and remove the check from dial-up networking,close everything and then go back and put the check back in dial-up click OK and windows will ask for your 98se cd to reinstall.
  23. Probably the file called pppmac.vxd and mstcp.vxd in your windows system are corrupted. Try to uninstall/remove "dial up adapter" and "tcp/ip" in your control panel Are connecting to the net with DSL or Dialup,if dsl might check this page after problem it fixed. http://www.speedguide.net/read_articles.php?id=119 Do a find on your system files and see how many copys of the file PPPMAC.VXD.

  • Create New...