cut

i got it off a friend, its a dell oem. my other winlite cd was made from a dell oem too so i havent had problems, aslong as u got a valid key to use if u put it on a non-dell

i have a xp media center edition dvd, ive made nlite discs before, but before i tried figured id ask, does nlite work with mce dvds?

i've been trying to share a folder between 2 pc s on my wireless network for 2 days now, both run nlite windows xp home, when i made the disc i choose "dont show my computer on network" setting or somthing like that, now i think its making it difficult for me because i have little knowledge of networking. i remember it saying you can still network to these pcs if you know the ip, or you hve to do it the old/hard way or somthin. can anyone help? thanks

link to download dont work....

nice. here it is =========== PCI devices =========== PCI\A347SCSI\0000 : A347SCSI SCSI Controller PCI\VEN_1002&DEV_4150&SUBSYS_7C20174B&REV_00\4&354AEA31&0&0008: SAPPHIRE RADEON 9600 ATLANTIS PCI\VEN_1002&DEV_4170&SUBSYS_7C21174B&REV_00\4&354AEA31&0&0108: SAPPHIRE RADEON 9600 ATLANTIS - Secondary PCI\VEN_1013&DEV_6003&SUBSYS_33575053&REV_01\3&267A616A&0&48: Santa Cruz(tm) PCI\VEN_1106&DEV_0269&SUBSYS_00000000&REV_00\3&267A616A&0&00: VIA Standard Host Bridge PCI\VEN_1106&DEV_0571&SUBSYS_05711849&REV_06\3&267A616A&0&79: VIA Bus Master IDE Controller PCI\VEN_1106&DEV_1269&SUBSYS_00000000&REV_00\3&267A616A&0&01: VIA Standard Host Bridge PCI\VEN_1106&DEV_2269&SUBSYS_00000000&REV_00\3&267A616A&0&02: VIA Standard Host Bridge PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_81\3&267A616A&0&80: VIA Rev 5 or later USB Universal Host Controller PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_81\3&267A616A&0&81: VIA Rev 5 or later USB Universal Host Controller PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_81\3&267A616A&0&82: VIA Rev 5 or later USB Universal Host Controller PCI\VEN_1106&DEV_3038&SUBSYS_30381849&REV_81\3&267A616A&0&83: VIA Rev 5 or later USB Universal Host Controller PCI\VEN_1106&DEV_3065&SUBSYS_30651849&REV_78\3&267A616A&0&90: VIA Rhine II Fast Ethernet Adapter PCI\VEN_1106&DEV_3104&SUBSYS_31041849&REV_86\3&267A616A&0&84: VIA USB Enhanced Host Controller PCI\VEN_1106&DEV_3149&SUBSYS_31491849&REV_80\3&267A616A&0&78: VIA SATA RAID Controller PCI\VEN_1106&DEV_3227&SUBSYS_00000000&REV_00\3&267A616A&0&88: VIA Standard PCI to ISA Bridge PCI\VEN_1106&DEV_3269&SUBSYS_00000000&REV_00\3&267A616A&0&03: VIA Standard Host Bridge PCI\VEN_1106&DEV_4269&SUBSYS_00000000&REV_00\3&267A616A&0&04: VIA Standard Host Bridge PCI\VEN_1106&DEV_7269&SUBSYS_00000000&REV_00\3&267A616A&0&07: VIA Standard Host Bridge PCI\VEN_1106&DEV_B198&SUBSYS_00000000&REV_00\3&267A616A&0&08: VIA CPU to AGP Controller PCI\VEN_1180&DEV_0475&SUBSYS_010114EF&REV_80\3&267A616A&0&58: Ricoh R/RL/RT/RC/5C475(II), R5C520 or Compatible CardBus Controller 21 matching device(s) found. =========== USB devices =========== USB\ROOT_HUB\4&122C2065&0 : USB Root Hub USB\ROOT_HUB\4&24E5D10A&0 : USB Root Hub USB\ROOT_HUB\4&28538922&0 : USB Root Hub USB\ROOT_HUB\4&3B0D39C7&0 : USB Root Hub USB\ROOT_HUB20\4&87115DE&0 : USB Root Hub USB\VID_046D&PID_C30B\5&15A56E73&0&2 : USB Human Interface Device USB\VID_062A&PID_0000\5&4B8FDAD&0&1 : USB Human Interface Device 7 matching device(s) found.

ok so how and what do i need to post

heres my hwid, but my processor is not a sempron 2500+, its actually a mobile athlon 1400 (see attached text file) Report.zip

jusst tell me where to find it

i dont think it will show if the chipset or lan drivers are installed or not, even with a normal windows install it installs lan drivers and i think it just shows nothing about chipset drivers in the device manager, however, the standby button is shaded and un-clickable untill i install the chipset (4in1) drivers. so it did not install them..

it complained when i installed all my drivers, via 4in1, lan, ati, turtle beach sound card no i didnt modify that, was i supposed to?

oops. thanks

i used nlite to set up my full unattended install, then used bashrats driver packs and base installer, then i edited my winnt.sif - i just added these Data] AutoPartition=0 [unattended] Repartition=No so it wouldnt auto format my second partion.. also i edited the txtsetup.sif and changed the following: [HardwareIdsDatabase] PCI\VEN_1106&DEV_3149&SUBSYS_80ED1043 = "viasraid" --> deleted PCI\VEN_1106&DEV_3149 = "viamraid" changed to PCI\VEN_1106&DEV_3149 = "viasraid" [sCSI] viasraid = "VIA SATA RAID Controller" changed to viasraid = "VIA Serial ATA RAID Controller" after blue screen after file copying during install so where di i go wrong? setup still asked me all the normal question.

this worked for me too after the same error. i have a asrock K7U 880 board with a mobile athlon

i searched this and found nothing specific. i made a cd with the driver packs (SATA, chipset,LAN) and the install worked ok, did not need a floppy which is great, but i dont think the other drivers installed. so while installing my drivers, chipset, lan, ati catalyst, after each installation i got a windows file protection window.. i hit cancel, i think it wanted me to inset a windows cd.. is this normal?

i just got my first cd to actually work, slipstreamed SATA driver pack and chipset, lan driver packs, my cd successfully installed the SATA drivers without a floppy (yes!) but i dont think my chipset or lan driver installed, im pretty sure the chipset one did not, because my system boots in one bar pass at the xp boot screen, which only happens when i have no chipset drivers installed, after i install via's 4in1 normally, my pc always boots slower, so i dont think it installed. is there a way to tell?

f*** you. people on these forums answer people needing help way too much with SEARCH. not all of us can spend all day searching, reading, re-phrasing our search, reading through 400 more posts to not find a specific answer, thats why we ask. so shut the f*** up and dont reply to me if you dont want to help, thanks!

after windows setup copys files and reboots my system to start the install i get the blue screen. i use method 1 bashrats base and cjipset/lan/mass storage drivers (formated without a F'in Floppy!) i have a asrock K7 upgrade board, K7U 880 w/via 8237 and a mobile athlon 1400

so can i just add that to my .sif file?

i've been trying to make xp cds with sata raid controller drivers and whatnot but i've come to the conclusion my A.D.D. is too severe to fallow that many directions, i can use nlite, i can even slipstream driverpacks and customize my xp install alittle, but fuc if i can make it install without a floppy. my question is, why cant the drivers for my sata/raid controller be loaded from a fricken thumb drive? i hate floppys.

i have one drive devided into 2 equal parts, and i dont want "d drive" to get reformated

can these be deleted if i dont want them without any problems?

so retail cds have x's there? my dell oem has an actual key, and my friends 2-years newer dell oem cd has the exact same key, this must be the "dell key" huh?

wtf does this mean? the sata drivers did not slipstream? i had it downloaded and extracted in the same folder as the chipset and lan drivers.

thanks for the help, can anyone confirm this?

people still use aol?