Dietmar

@Damnation I have no idea. When I have time in my next holidays in 5 weeks I make a try also with Ndis6 for to solve this loongstanding problem in XP. Really, with an working ndis6 for XP a lot of new motherboards will work to full with XP SP3 Dietmar

@Damnation This Bsod happens very late in boot process. I can see already the mouse pointer. And in Safe Mode (without network) I can install the driver for the i219-v e1d6232.sys from win7 bit32. It gets there all needed resources without conflict and IRQ 11. But on restart the driver e1d6232.sys is unloaded and the above Bsod happens Dietmar PS: I think, that it is only a very small step for to get working Ndis6 on XP.

Intel Storage Driver Ver: 11.2.0.1006 *** Fatal System Error: 0x000000d1 (0x00300016,0x00000002,0x00000000,0xB98A99F7) Break instruction exception - code 80000003 (first chance) A fatal system error has occurred. Debugger entered on first try; Bugcheck callbacks have not been invoked. A fatal system error has occurred. Connected to Windows XP 2600 x86 compatible target at (Sun Jun 5 19:53:13.890 2022 (UTC + 2:00)), ptr64 FALSE Loading Kernel Symbols ............................................................... ....... Loading User Symbols Loading unloaded module list ........ ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck D1, {300016, 2, 0, b98a99f7} Probably caused by : NETIO.SYS ( NETIO!NmrpIsEqualNpiId+8 ) Followup: MachineOwner --------- nt!RtlpBreakWithStatusInstruction: 8052b724 cc int 3 11: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If kernel debugger is available get stack backtrace. Arguments: Arg1: 00300016, memory referenced Arg2: 00000002, IRQL Arg3: 00000000, value 0 = read operation, 1 = write operation Arg4: b98a99f7, address which referenced memory Debugging Details: ------------------ READ_ADDRESS: 00300016 CURRENT_IRQL: 2 FAULTING_IP: NETIO!NmrpIsEqualNpiId+8 b98a99f7 8b10 mov edx,dword ptr [eax] DEFAULT_BUCKET_ID: DRIVER_FAULT BUGCHECK_STR: 0xD1 PROCESS_NAME: System ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) x86fre TRAP_FRAME: ba547a38 -- (.trap 0xffffffffba547a38) ErrCode = 00000000 eax=00300016 ebx=00300012 ecx=b9b2d6f0 edx=00000001 esi=b9b2d6f0 edi=00000000 eip=b98a99f7 esp=ba547aac ebp=ba547aac iopl=0 nv up ei pl nz na pe nc cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010206 NETIO!NmrpIsEqualNpiId+0x8: b98a99f7 8b10 mov edx,dword ptr [eax] ds:0023:00300016=???????? Resetting default scope LAST_CONTROL_TRANSFER: from 804f8e95 to 8052b724 STACK_TEXT: ba5475ec 804f8e95 00000003 ba547948 00000000 nt!RtlpBreakWithStatusInstruction ba547638 804f9a80 00000003 00300016 b98a99f7 nt!KiBugCheckDebugBreak+0x19 ba547a18 8054483c 0000000a 00300016 00000002 nt!KeBugCheck2+0x574 ba547a18 b98a99f7 0000000a 00300016 00000002 nt!KiTrap0E+0x180 ba547aac b98a9e81 00300016 b9b2d6f0 89adf2f8 NETIO!NmrpIsEqualNpiId+0x8 ba547ac4 b98a9d5d 8bc16730 00000001 b9b2f008 NETIO!NmrpFindOrAddRegisteredNpiId+0x22 ba547b30 b98a9c91 89adf2f8 ba547b68 ba547b64 NETIO!NmrpRegisterModuleAndGetBindableCandidates+0x33 ba547b58 b98a9f72 00000002 b9b2e018 00000000 NETIO!NmrpRegisterModule+0x3c ba547b80 b9b0bf2f b9b0c6db 00000000 b9b2f008 NETIO!NmrRegisterProvider+0x4b ba547ba4 b9b0c6db 00000000 ba547dcc 00000030 NDIS!ndisStartNsiProvider+0x4b ba547bc0 b9b645c0 ba547c64 89b01da0 00000000 NDIS!ndisInitializeNsi+0x50 ba547bd4 b9811bd3 ba547c7c b981166c ba547bf8 NDIS!NdisRegisterProtocol+0x18 ba547c84 805813af 89859440 89b2c000 00000000 ndisuio!DriverEntry+0x175 ba547d54 805814bf 80000554 00000001 00000000 nt!IopLoadDriver+0x66d ba547d7c 80538921 80000554 00000000 8bc37da0 nt!IopLoadUnloadDriver+0x45 ba547dac 805cffee b517bcf4 00000000 00000000 nt!ExpWorkerThread+0xef ba547ddc 8054623e 80538832 00000001 00000000 nt!PspSystemThreadStartup+0x34 00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16 STACK_COMMAND: kb FOLLOWUP_IP: NETIO!NmrpIsEqualNpiId+8 b98a99f7 8b10 mov edx,dword ptr [eax] SYMBOL_STACK_INDEX: 4 SYMBOL_NAME: NETIO!NmrpIsEqualNpiId+8 FOLLOWUP_NAME: MachineOwner MODULE_NAME: NETIO IMAGE_NAME: NETIO.SYS DEBUG_FLR_IMAGE_TIMESTAMP: 5b48ef86 IMAGE_VERSION: 6.1.7601.24208 FAILURE_BUCKET_ID: 0xD1_NETIO!NmrpIsEqualNpiId+8 BUCKET_ID: 0xD1_NETIO!NmrpIsEqualNpiId+8 ANALYSIS_SOURCE: KM FAILURE_ID_HASH_STRING: km:0xd1_netio!nmrpisequalnpiid+8 FAILURE_ID_HASH: {1d7ea187-17c8-1608-8471-24546162eb85} Followup: MachineOwner --------- 11: kd> lm start end module name 80062000 80072a80 pci (deferred) 80100000 8012a000 KDSTUB (deferred) 804d7000 806e5000 nt (pdb symbols) C:\Programme\Windows Kits\8.1\Debuggers\x86\sym\ntkrpamp.pdb\270E083F57714738A1895FE542CFB8DE1\ntkrpamp.pdb 806e5000 80705d80 hal (deferred) 80706000 8072e000 kdcom (deferred) b4ec0000 b4ec0d00 dxgthk (deferred) b547c000 b547e900 Dxapi (deferred) b5837000 b583b500 watchdog (deferred) b5d50000 b5dbfa80 mrxsmb (deferred) b6ac6000 b6af0b00 rdbss (deferred) b7ab5000 b7ad6d00 afd (deferred) b7ad7000 b7afed80 netbt (deferred) b7aff000 b7b24500 ipnat (deferred) b7b25000 b7b7d480 tcpip (deferred) b7b7e000 b7b90600 ipsec (deferred) b7bb1000 b7bc4880 VIDEOPRT (deferred) b7bcf000 b7c2cf00 update (deferred) b7c2d000 b7c4f700 ks (deferred) b7c50000 b7c7fc80 rdpdr (deferred) b7edd000 b7eddb80 Null (deferred) b823e000 b823ec00 audstub (deferred) b88a0000 b88a8780 netbios (deferred) b88b0000 b88b8900 msgpc (deferred) b88e0000 b88e9f80 termdd (deferred) b8ca7000 b8caba80 TDI (deferred) b8caf000 b8cb6980 Npfs (deferred) b8cb7000 b8cbbb00 Msfs (deferred) b8cbf000 b8cc4200 vga (deferred) b8f3b000 b8f45e00 Fips (deferred) b92d5000 b92d7280 rasacd (deferred) b96b5000 b96dd000 HDAudBus (deferred) b97e7000 b97e9400 Fs_Rec (deferred) b97f3000 b97f6c80 mssmbios (pdb symbols) C:\Programme\Windows Kits\8.1\Debuggers\x86\sym\mssmbios.pdb\9940673F3B9A4BD682DF9D96A12A355C1\mssmbios.pdb b980f000 b9812900 ndisuio (pdb symbols) C:\Programme\Windows Kits\8.1\Debuggers\x86\sym\ndisuio.pdb\C49AA8614D0E4F23B14F5894ABB43FD41\ndisuio.pdb b987f000 b9898e80 Mup (deferred) b9899000 b98d8000 NETIO (pdb symbols) C:\Programme\Windows Kits\8.1\Debuggers\x86\sym\netio.pdb\5BBB5169EEB04D0BB707BFA122C6C9442\netio.pdb b98d8000 b9903000 msrpc (deferred) b9903000 b9aec680 ntoskrn8 (deferred) b9aed000 b9ba5000 NDIS (pdb symbols) C:\Programme\Windows Kits\8.1\Debuggers\x86\sym\ndis.pdb\B69DA90026554DB7963D1422C84157172\ndis.pdb b9ba5000 b9c31d00 Ntfs (deferred) b9c32000 b9c48b80 KSecDD (deferred) b9c49000 b9c5af00 sr (deferred) b9c5b000 b9c7ab00 fltMgr (deferred) b9c7b000 b9f30000 iaStor (deferred) b9f30000 b9f55700 dmio (deferred) b9f56000 b9f74880 ftdisk (deferred) b9f75000 b9fa7000 ACPI (deferred) ba0a8000 ba0b1180 isapnp (deferred) ba0b8000 ba0c2700 MountMgr (deferred) ba0c8000 ba0d3000 PartMgr (deferred) ba0d8000 ba0e4c80 VolSnap (deferred) ba0e8000 ba0f8000 disk (deferred) ba0f8000 ba104180 CLASSPNP (deferred) ba2c8000 ba2d4d00 i8042prt (deferred) ba2d8000 ba2e7c00 serial (deferred) ba2e8000 ba2f0e00 intelppm (deferred) ba328000 ba32e800 firadisk (deferred) ba3a0000 ba3a6000 kbdclass (deferred) ba3a8000 ba3ada00 mouclass (deferred) ba4b8000 ba4bb000 BOOTVID (deferred) ba57c000 ba57e280 wmiacpi (deferred) ba580000 ba583d80 serenum (deferred) ba5a8000 ba5a9100 WMILIB (deferred) ba5aa000 ba5ab700 dmload (deferred) ba628000 ba629100 swenum (deferred) ba62e000 ba62f080 Beep (deferred) ba630000 ba631080 RDPCDD (deferred) bf000000 bf011600 dxg (deferred) bf012000 bf05ab00 ATMFD (deferred) bf800000 bf9d3700 win32k (deferred) bff50000 bff52480 framebuf (deferred) Unloaded modules: b5d22000 b5d25000 DumpDrv.SYS ba2a8000 ba2b3000 imapi.sys b8890000 b889f000 redbook.sys b8cc7000 b8ccc000 Cdaudio.SYS b88c0000 b88d0000 cdrom.sys b97eb000 b97ee000 Sfloppy.SYS b88d0000 b88dc000 Flpydisk.SYS b8ccf000 b8cd6000 Fdc.SYS 11: kd> !devnode 0 1 Dumping IopRootDeviceNode (= 0x8bc16990) DevNode 0x8bc16990 for PDO 0x8bc16ac8 InstancePath is "HTREE\ROOT\0" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc16460 for PDO 0x8bc165a8 InstancePath is "Root\ACPI_HAL\0000" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4b410 for PDO 0x8bc123c0 InstancePath is "ACPI_HAL\PNP0C08\0" ServiceName is "ACPI" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb60470 for PDO 0x8bb12448 InstancePath is "ACPI\PNP0A08\0" ServiceName is "pci" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb9f3f8 for PDO 0x8bb262c8 InstancePath is "PCI\VEN_8086&DEV_3EC2&SUBSYS_00000000&REV_07\3&11583659&0&00" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb9f2d8 for PDO 0x8b9af030 InstancePath is "PCI\VEN_8086&DEV_1901&SUBSYS_00000000&REV_07\3&11583659&0&08" ServiceName is "pci" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb257a8 for PDO 0x8bb25030 InstancePath is "PCI\VEN_10DE&DEV_1287&SUBSYS_730B19DA&REV_A1\4&17bc2637&0&0008" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_FAILED_INSTALL DevNode 0x8bb25688 for PDO 0x8bb25cf8 InstancePath is "PCI\VEN_10DE&DEV_0E0F&SUBSYS_730B19DA&REV_A1\4&17bc2637&0&0108" ServiceName is "HDAudBus" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x89aeb680 for PDO 0x89aef890 InstancePath is "HDAUDIO\FUNC_01&VEN_10DE&DEV_0051&SUBSYS_19DA730B&REV_1001\5&2d31c2b4&0&0001" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_FAILED_INSTALL DevNode 0x8bb9f1b8 for PDO 0x8b9afcf8 InstancePath is "PCI\VEN_8086&DEV_A2AF&SUBSYS_A2AF1849&REV_00\3&11583659&0&A0" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_FAILED_INSTALL DevNode 0x8bb9e008 for PDO 0x8b9af9c0 InstancePath is "PCI\VEN_8086&DEV_A2B1&SUBSYS_A2B11849&REV_00\3&11583659&0&A2" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_DISABLED DevNode 0x8bb9eee8 for PDO 0x8b9af688 InstancePath is "PCI\VEN_8086&DEV_A2BA&SUBSYS_A2BA1849&REV_00\3&11583659&0&B0" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_DISABLED DevNode 0x8bb9edc8 for PDO 0x8b9af350 InstancePath is "PCI\VEN_8086&DEV_A282&SUBSYS_A2821849&REV_00\3&11583659&0&B8" ServiceName is "iaStor" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8ba858d0 for PDO 0x8babc028 InstancePath is "IDE\DiskWDC_WD2003FZEX-00SRLA0__________________01.01A01\4&3543605e&0&0.0.0" ServiceName is "disk" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb9eca8 for PDO 0x8bb11e50 InstancePath is "PCI\VEN_8086&DEV_A2E7&SUBSYS_00000000&REV_F0\3&11583659&0&D8" ServiceName is "pci" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb9eb88 for PDO 0x8bb11b18 InstancePath is "PCI\VEN_8086&DEV_A290&SUBSYS_00000000&REV_F0\3&11583659&0&E0" ServiceName is "pci" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb9ea68 for PDO 0x8bb117e0 InstancePath is "PCI\VEN_8086&DEV_A291&SUBSYS_00000000&REV_F0\3&11583659&0&E1" ServiceName is "pci" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8b9ae838 for PDO 0x8b9aed08 InstancePath is "PCI\VEN_1B21&DEV_0612&SUBSYS_06121849&REV_02\4&12e73dd2&0&00E1" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_FAILED_INSTALL DevNode 0x8bb9e948 for PDO 0x8bb114a8 InstancePath is "PCI\VEN_8086&DEV_A292&SUBSYS_00000000&REV_F0\3&11583659&0&E2" ServiceName is "pci" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb411f8 for PDO 0x8bb416c8 InstancePath is "PCI\VEN_DEAD&DEV_BEEF&SUBSYS_15391849&REV_03\4&2880aa1&0&00E2" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_FAILED_INSTALL DevNode 0x8bb9e828 for PDO 0x8bab0030 InstancePath is "PCI\VEN_8086&DEV_A294&SUBSYS_00000000&REV_F0\3&11583659&0&E4" ServiceName is "pci" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb41b20 for PDO 0x8bb25230 InstancePath is "PCI\VEN_1B21&DEV_2142&SUBSYS_21421849&REV_00\4&1fc90664&0&00E4" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_FAILED_INSTALL DevNode 0x8bb9e708 for PDO 0x8bab0e50 InstancePath is "PCI\VEN_8086&DEV_A298&SUBSYS_00000000&REV_F0\3&11583659&0&E8" ServiceName is "pci" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb9e5e8 for PDO 0x8bab0b18 InstancePath is "PCI\VEN_8086&DEV_A2C9&SUBSYS_00000000&REV_00\3&11583659&0&F8" ServiceName is "isapnp" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb102e0 for PDO 0x8b9ae350 InstancePath is "ISAPNP\ReadDataPort\0" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb101c0 for PDO 0x8b9ae238 InstancePath is "ACPI\PNP0C02\0" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8baaf008 for PDO 0x8bb10030 InstancePath is "ACPI\PNP0303\0" ServiceName is "i8042prt" TargetDeviceNotify List - f 0xe17c25f8 b 0xe17c25f8 State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8baafee8 for PDO 0x8bb10f18 InstancePath is "ACPI\PNP0F03\0" ServiceName is "i8042prt" TargetDeviceNotify List - f 0xe1623718 b 0xe1623718 State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8baafdc8 for PDO 0x8bb10e00 InstancePath is "ACPI\PNP0501\0" ServiceName is "Serial" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8baafca8 for PDO 0x8bb10ce8 InstancePath is "ACPI\INT0800\4&e69c0be&0" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8baafb88 for PDO 0x8bb10bd0 InstancePath is "ACPI\PNP0103\0" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8baafa68 for PDO 0x8bb10ab8 InstancePath is "ACPI\PNP0000\4&e69c0be&0" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8baaf948 for PDO 0x8bb109a0 InstancePath is "ACPI\PNP0C04\4&e69c0be&0" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8baaf828 for PDO 0x8bb10888 InstancePath is "ACPI\PNP0C02\2" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8baaf708 for PDO 0x8bb10770 InstancePath is "ACPI\PNP0C02\LPC_DEV" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8baaf5e8 for PDO 0x8bb10658 InstancePath is "ACPI\PNP0B00\4&e69c0be&0" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8baaf4c8 for PDO 0x8bb10540 InstancePath is "ACPI\PNP0100\4&e69c0be&0" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8baaf3a8 for PDO 0x8bb10428 InstancePath is "ACPI\INT3F0D\4&e69c0be&0" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8bb9e4c8 for PDO 0x8bab0938 InstancePath is "PCI\VEN_8086&DEV_A2A1&SUBSYS_A2A11849&REV_00\3&11583659&0&FA" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_DISABLED DevNode 0x8bb9e3a8 for PDO 0x8bab0600 InstancePath is "PCI\VEN_8086&DEV_A2F0&SUBSYS_12211849&REV_00\3&11583659&0&FB" ServiceName is "HDAudBus" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x89b324b0 for PDO 0x8ba0b238 InstancePath is "HDAUDIO\FUNC_01&VEN_10EC&DEV_1220&SUBSYS_18491221&REV_1000\4&cc7b6aa&0&0001" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_FAILED_INSTALL DevNode 0x8bb9e288 for PDO 0x8bab02c8 InstancePath is "PCI\VEN_8086&DEV_A2A3&SUBSYS_A2A31849&REV_00\3&11583659&0&FC" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_DISABLED DevNode 0x8bb9e168 for PDO 0x8bba0e50 InstancePath is "PCI\VEN_8086&DEV_15B8&SUBSYS_15B81849&REV_00\3&11583659&0&FE" ServiceName is "e1dexpress" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8bb9d008 for PDO 0x8b9af238 InstancePath is "ACPI\PNP0C02\1" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8bb9dee8 for PDO 0x8bba0be0 InstancePath is "ACPI\PNP0C02\PCHRESV" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8bb9ddc8 for PDO 0x8bba0ac8 InstancePath is "ACPI\PNP0C02\IoTraps" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8bb9dca8 for PDO 0x8bba09b0 InstancePath is "ACPI\PNP0C02\5" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) DevNode 0x8bb9db88 for PDO 0x8bba0898 InstancePath is "ACPI\PNP0C14\MXM2" ServiceName is "WmiAcpi" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb60350 for PDO 0x8bbb31a8 InstancePath is "ACPI\GenuineIntel_-_x86_Family_6_Model_158\_0" ServiceName is "intelppm" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb12850 for PDO 0x8bbb2298 InstancePath is "ACPI\GenuineIntel_-_x86_Family_6_Model_158\_1" ServiceName is "intelppm" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb12730 for PDO 0x8bc514a8 InstancePath is "ACPI\GenuineIntel_-_x86_Family_6_Model_158\_2" ServiceName is "intelppm" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb12610 for PDO 0x8bb852f8 InstancePath is "ACPI\GenuineIntel_-_x86_Family_6_Model_158\_3" ServiceName is "intelppm" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4bbb0 for PDO 0x8bc11398 InstancePath is "ACPI\GenuineIntel_-_x86_Family_6_Model_158\_4" ServiceName is "intelppm" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4ba90 for PDO 0x8b9b0f18 InstancePath is "ACPI\GenuineIntel_-_x86_Family_6_Model_158\_5" ServiceName is "intelppm" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4b970 for PDO 0x8bc51798 InstancePath is "ACPI\GenuineIntel_-_x86_Family_6_Model_158\_6" ServiceName is "intelppm" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4b850 for PDO 0x8bb122b8 InstancePath is "ACPI\GenuineIntel_-_x86_Family_6_Model_158\_7" ServiceName is "intelppm" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4b730 for PDO 0x8bab3248 InstancePath is "ACPI\GenuineIntel_-_x86_Family_6_Model_158\_8" ServiceName is "intelppm" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb468c0 for PDO 0x8bc51348 InstancePath is "ACPI\GenuineIntel_-_x86_Family_6_Model_158\_9" ServiceName is "intelppm" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb467a0 for PDO 0x8b9b0030 InstancePath is "ACPI\GenuineIntel_-_x86_Family_6_Model_158\10" ServiceName is "intelppm" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb46680 for PDO 0x8b9b0d78 InstancePath is "ACPI\GenuineIntel_-_x86_Family_6_Model_158\11" ServiceName is "intelppm" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb46560 for PDO 0x8bc16e88 InstancePath is "ACPI\PNP0C0E\2&daba3ff&0" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb46440 for PDO 0x8bc16d70 InstancePath is "ACPI\PNP0C14\TBFP" ServiceName is "WmiAcpi" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb46320 for PDO 0x8bb46d50 InstancePath is "ACPI\INT33A1\1" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_DISABLED DevNode 0x8bab3ab0 for PDO 0x8bb46c38 InstancePath is "ACPI\PNP0C0C\2&daba3ff&0" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bab3990 for PDO 0x8bb605b8 InstancePath is "ACPI\FixedButton\2&daba3ff&0" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc50ee8 for PDO 0x8bc50030 InstancePath is "Root\dmio\0000" ServiceName is "dmio" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc50ca8 for PDO 0x8bc50df0 InstancePath is "Root\firadisk\0000" ServiceName is "FiraDisk" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc50a68 for PDO 0x8bc50bb0 InstancePath is "Root\ftdisk\0000" ServiceName is "ftdisk" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bb21768 for PDO 0x8ba829c0 InstancePath is "STORAGE\Volume\1&30a96598&0&Signature6923B75Offset100000Length1D1C05C0000" ServiceName is "VolSnap" TargetDeviceNotify List - f 0xe100c800 b 0xe13ae528 State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc50828 for PDO 0x8bc50970 InstancePath is "Root\LEGACY_AFD\0000" ServiceName is "AFD" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc505e8 for PDO 0x8bc50730 InstancePath is "Root\LEGACY_BEEP\0000" ServiceName is "Beep" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc50280 for PDO 0x8bc503c8 InstancePath is "Root\LEGACY_DMBOOT\0000" ServiceName is "dmboot" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc15008 for PDO 0x8bc50188 InstancePath is "Root\LEGACY_DMLOAD\0000" ServiceName is "dmload" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc15dc8 for PDO 0x8bc15f10 InstancePath is "Root\LEGACY_FIPS\0000" ServiceName is "Fips" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc15b38 for PDO 0x8bc15c80 InstancePath is "Root\LEGACY_GPC\0000" ServiceName is "Gpc" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc158f8 for PDO 0x8bc15a40 InstancePath is "Root\LEGACY_HTTP\0000" ServiceName is "HTTP" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc156b8 for PDO 0x8bc15800 InstancePath is "Root\LEGACY_IPNAT\0000" ServiceName is "IpNat" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc15478 for PDO 0x8bc155c0 InstancePath is "Root\LEGACY_IPSEC\0000" ServiceName is "IPSec" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc15238 for PDO 0x8bc15380 InstancePath is "Root\LEGACY_KSECDD\0000" ServiceName is "ksecdd" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4fee8 for PDO 0x8bc4f030 InstancePath is "Root\LEGACY_MOUNTMGR\0000" ServiceName is "mountmgr" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4fca8 for PDO 0x8bc4fdf0 InstancePath is "Root\LEGACY_NDIS\0000" ServiceName is "NDIS" State = DeviceNodeRemoved (0x312) Previous State = DeviceNodeStarted (0x308) Problem = CM_PROB_DEVICE_NOT_THERE DevNode 0x8bc4fa68 for PDO 0x8bc4fbb0 InstancePath is "Root\LEGACY_NDISTAPI\0000" ServiceName is "NdisTapi" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4f828 for PDO 0x8bc4f970 InstancePath is "Root\LEGACY_NDISUIO\0000" ServiceName is "Ndisuio" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4f5e8 for PDO 0x8bc4f730 InstancePath is "Root\LEGACY_NDPROXY\0000" ServiceName is "NDProxy" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4f3a8 for PDO 0x8bc4f4f0 InstancePath is "Root\LEGACY_NETBT\0000" ServiceName is "NetBT" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4f168 for PDO 0x8bc4f2b0 InstancePath is "Root\LEGACY_NULL\0000" ServiceName is "Null" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc14ee8 for PDO 0x8bc14030 InstancePath is "Root\LEGACY_PARPORT\0000" ServiceName is "Parport" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc14ca8 for PDO 0x8bc14df0 InstancePath is "Root\LEGACY_PARTMGR\0000" ServiceName is "PartMgr" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc14a68 for PDO 0x8bc14bb0 InstancePath is "Root\LEGACY_PARVDM\0000" ServiceName is "ParVdm" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc14828 for PDO 0x8bc14970 InstancePath is "Root\LEGACY_RASACD\0000" ServiceName is "RasAcd" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc145e8 for PDO 0x8bc14730 InstancePath is "Root\LEGACY_RDPCDD\0000" ServiceName is "RDPCDD" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc143a8 for PDO 0x8bc144f0 InstancePath is "Root\LEGACY_RDPWD\0000" ServiceName is "RDPWD" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc14168 for PDO 0x8bc142b0 InstancePath is "Root\LEGACY_RSPNDR\0000" ServiceName is "rspndr" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4eee8 for PDO 0x8bc4e030 InstancePath is "Root\LEGACY_TCPIP\0000" ServiceName is "Tcpip" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4eca8 for PDO 0x8bc4edf0 InstancePath is "Root\LEGACY_TDTCP\0000" ServiceName is "TDTCP" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4ea68 for PDO 0x8bc4ebb0 InstancePath is "Root\LEGACY_VGASAVE\0000" ServiceName is "VgaSave" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4e828 for PDO 0x8bc4e970 InstancePath is "Root\LEGACY_VOLSNAP\0000" ServiceName is "VolSnap" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4e5e8 for PDO 0x8bc4e730 InstancePath is "Root\LEGACY_WANARP\0000" ServiceName is "Wanarp" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4e3a8 for PDO 0x8bc4e4f0 InstancePath is "Root\MEDIA\MS_MMACM" ServiceName is "audstub" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4e168 for PDO 0x8bc4e2b0 InstancePath is "Root\MEDIA\MS_MMDRV" ServiceName is "audstub" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc13ee8 for PDO 0x8bc13030 InstancePath is "Root\MEDIA\MS_MMMCI" ServiceName is "audstub" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc13ca8 for PDO 0x8bc13df0 InstancePath is "Root\MEDIA\MS_MMVCD" ServiceName is "audstub" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc13a68 for PDO 0x8bc13bb0 InstancePath is "Root\MEDIA\MS_MMVID" ServiceName is "audstub" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc13828 for PDO 0x8bc13970 InstancePath is "Root\MS_L2TPMINIPORT\0000" ServiceName is "Rasl2tp" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_DISABLED DevNode 0x8bc135e8 for PDO 0x8bc13730 InstancePath is "Root\MS_NDISWANIP\0000" ServiceName is "NdisWan" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_DISABLED DevNode 0x8bc133a8 for PDO 0x8bc134f0 InstancePath is "Root\MS_PPPOEMINIPORT\0000" ServiceName is "RasPppoe" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_DISABLED DevNode 0x8bc13168 for PDO 0x8bc132b0 InstancePath is "Root\MS_PPTPMINIPORT\0000" ServiceName is "PptpMiniport" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_DISABLED DevNode 0x8bc4dee8 for PDO 0x8bc4d030 InstancePath is "Root\MS_PSCHEDMP\0000" ServiceName is "PSched" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_DISABLED DevNode 0x8bc4dca8 for PDO 0x8bc4ddf0 InstancePath is "Root\MS_PSCHEDMP\0001" ServiceName is "PSched" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_DISABLED DevNode 0x8bc4da68 for PDO 0x8bc4dbb0 InstancePath is "Root\MS_PSCHEDMP\0002" ServiceName is "PSched" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_DISABLED DevNode 0x8bc4d828 for PDO 0x8bc4d970 InstancePath is "Root\MS_PSCHEDMP\0003" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_NOT_CONFIGURED DevNode 0x8bc4d5e8 for PDO 0x8bc4d730 InstancePath is "Root\MS_PTIMINIPORT\0000" ServiceName is "Raspti" State = DeviceNodeInitialized (0x302) Previous State = DeviceNodeUninitialized (0x301) Problem = CM_PROB_DISABLED DevNode 0x8bc4d3a8 for PDO 0x8bc4d4f0 InstancePath is "Root\RDPDR\0000" ServiceName is "rdpdr" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc4d168 for PDO 0x8bc4d2b0 InstancePath is "Root\RDP_KBD\0000" ServiceName is "TermDD" TargetDeviceNotify List - f 0xe1792f98 b 0xe1792f98 State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc12ee8 for PDO 0x8bc12030 InstancePath is "Root\RDP_MOU\0000" ServiceName is "TermDD" TargetDeviceNotify List - f 0xe13b55f0 b 0xe13b55f0 State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc12ca8 for PDO 0x8bc12df0 InstancePath is "Root\SYSTEM\0000" ServiceName is "swenum" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc12a68 for PDO 0x8bc12bb0 InstancePath is "Root\SYSTEM\0001" ServiceName is "update" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d) DevNode 0x8bc12828 for PDO 0x8bc12970 InstancePath is "Root\SYSTEM\0002" ServiceName is "mssmbios" State = DeviceNodeStarted (0x308) Previous State = DeviceNodeEnumerateCompletion (0x30d)

@Damnation This is from files before, Bsod goes to netio Dietmar Intel Storage Driver Ver: 11.2.0.1006 *** Fatal System Error: 0x0000000a (0x00000034,0x00000002,0x00000001,0x806E7A16) Break instruction exception - code 80000003 (first chance) A fatal system error has occurred. Debugger entered on first try; Bugcheck callbacks have not been invoked. A fatal system error has occurred. Connected to Windows XP 2600 x86 compatible target at (Sun Jun 5 19:19:19.625 2022 (UTC + 2:00)), ptr64 FALSE Loading Kernel Symbols ........................................... Loading User Symbols Loading unloaded module list ..... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck A, {34, 2, 1, 806e7a16} *** ERROR: Symbol file could not be found. Defaulted to export symbols for e1d6232.sys - *** No owner thread found for resource 8055b4e0 *** No owner thread found for resource 8055b560 *** No owner thread found for resource 8055b4e0 *** No owner thread found for resource 8055b560 *** No owner thread found for resource 8055b4e0 *** No owner thread found for resource 8055b560 *** No owner thread found for resource 8055b4e0 *** No owner thread found for resource 8055b560 *** No owner thread found for resource 8055b4e0 *** No owner thread found for resource 8055b560 Probably caused by : NETIO.SYS ( NETIO!NsipAccessCheck+10a ) Followup: MachineOwner --------- nt!RtlpBreakWithStatusInstruction: 8052b724 cc int 3 1: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: 00000034, memory referenced Arg2: 00000002, IRQL Arg3: 00000001, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: 806e7a16, address which referenced memory Debugging Details: ------------------ *** No owner thread found for resource 8055b4e0 *** No owner thread found for resource 8055b560 *** No owner thread found for resource 8055b4e0 *** No owner thread found for resource 8055b560 *** No owner thread found for resource 8055b4e0 *** No owner thread found for resource 8055b560 *** No owner thread found for resource 8055b4e0 *** No owner thread found for resource 8055b560 *** No owner thread found for resource 8055b4e0 *** No owner thread found for resource 8055b560 WRITE_ADDRESS: 00000034 CURRENT_IRQL: 2 FAULTING_IP: hal!KeAcquireInStackQueuedSpinLock+26 806e7a16 8711 xchg edx,dword ptr [ecx] DEFAULT_BUCKET_ID: DRIVER_FAULT BUGCHECK_STR: 0xA PROCESS_NAME: System ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) x86fre TRAP_FRAME: ba5535bc -- (.trap 0xffffffffba5535bc) ErrCode = 00000002 eax=ba553640 ebx=00020019 ecx=00000034 edx=ba553640 esi=00000000 edi=8bc37620 eip=806e7a16 esp=ba553630 ebp=ba55364c iopl=0 nv up ei pl zr na pe nc cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010246 hal!KeAcquireInStackQueuedSpinLock+0x26: 806e7a16 8711 xchg edx,dword ptr [ecx] ds:0023:00000034=???????? Resetting default scope LOCK_ADDRESS: 8055b4e0 -- (!locks 8055b4e0) Resource @ nt!PiEngineLock (0x8055b4e0) Exclusively owned Contention Count = 2 Threads: 8bc37620-01<*> 1 total locks, 1 locks currently held PNP_TRIAGE: Lock address : 0x8055b4e0 Thread Count : 0 Thread address: 0x00000000 Thread wait : 0x0 LAST_CONTROL_TRANSFER: from 804f8e95 to 8052b724 STACK_TEXT: ba553170 804f8e95 00000003 ba5534cc 00000000 nt!RtlpBreakWithStatusInstruction ba5531bc 804f9a80 00000003 00000034 806e7a16 nt!KiBugCheckDebugBreak+0x19 ba55359c 8054483c 0000000a 00000034 00000002 nt!KeBugCheck2+0x574 ba55359c 806e7a16 0000000a 00000034 00000002 nt!KiTrap0E+0x180 ba55364c 805f7054 00000000 00000001 8bc3a9c8 hal!KeAcquireInStackQueuedSpinLock+0x26 ba553660 b989fc81 ba553690 00000000 00000000 nt!SeLockSubjectContext+0x22 ba5536bc b98a5a0a 00000000 e17512e0 00000000 NETIO!NsipAccessCheck+0x10a ba553728 b9b0b945 ba553740 b9b307c0 00000000 NETIO!NsiRegisterChangeNotificationEx+0x23 ba55375c b9b0c6ea 00060000 8052e8fc ba553784 NDIS!ndisStartNsiClient+0x6b ba553778 b9b08db9 b506b000 89a971d0 00060014 NDIS!ndisInitializeNsi+0x5f ba553790 b501a2a3 89a971d0 8b9b5000 00000000 NDIS!NdisMRegisterMiniportDriver+0x51 WARNING: Stack unwind information not available. Following frames may be wrong. ba55380c 805813af 89a971d0 8b9b5000 00000000 e1d6232!DriverEntry+0x20f ba5538dc 8058f557 800003e8 00000000 ba553900 nt!IopLoadDriver+0x66d ba553920 805e7b7f e13a8da0 00000001 800003e8 nt!PipCallDriverAddDeviceQueryRoutine+0x235 ba55396c 805e7f76 e13a8d84 00000001 ba5539e8 nt!RtlpCallQueryRegistryRoutine+0x37d ba5539f4 80590ddf 00000001 00000084 ba553a1c nt!RtlQueryRegistryValues+0x368 ba553ac8 8059229c 00000000 00000001 ba553d5c nt!PipCallDriverAddDevice+0x261 ba553d24 80592832 8bba0b88 00000001 00000000 nt!PipProcessDevNodeTree+0x1a4 ba553d54 804f6a2a 00000003 8055b5c0 8056485c nt!PiRestartDevice+0x80 ba553d7c 80538921 00000000 00000000 8bc37620 nt!PipDeviceActionWorker+0x168 ba553dac 805cffee 00000000 00000000 00000000 nt!ExpWorkerThread+0xef ba553ddc 8054623e 80538832 00000001 00000000 nt!PspSystemThreadStartup+0x34 00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16 STACK_COMMAND: kb FOLLOWUP_IP: NETIO!NsipAccessCheck+10a b989fc81 8d4508 lea eax,[ebp+8] SYMBOL_STACK_INDEX: 6 SYMBOL_NAME: NETIO!NsipAccessCheck+10a FOLLOWUP_NAME: MachineOwner MODULE_NAME: NETIO IMAGE_NAME: NETIO.SYS DEBUG_FLR_IMAGE_TIMESTAMP: 5b48ef86 IMAGE_VERSION: 6.1.7601.24208 FAILURE_BUCKET_ID: 0xA_NETIO!NsipAccessCheck+10a BUCKET_ID: 0xA_NETIO!NsipAccessCheck+10a ANALYSIS_SOURCE: KM FAILURE_ID_HASH_STRING: km:0xa_netio!nsipaccesscheck+10a FAILURE_ID_HASH: {b870b433-9615-1bd1-84b9-0080fe54f7d5} Followup: MachineOwner

@Damnation I just set up a fresh XP SP3 (june 2022 version) from @Outbreaker on the Asrock z370 k6 board with Customized Option; 4,5,C,E,H for to avoid any conflict with your new ntoskrn8.sys . Until now, no Lan driver is installed. First I make a copy of this fresh installed XP so that I can go back later very easy to a definite start situation Dietmar EDIT: I get an endless running bar for the i219-V . Please tell me, which other files I have to install together with your new ntoskrn8.sys .

Because I want to understand, what is going on with the Biostar z690A board, I make a XP SP3 german real setup DVD with all SP3 updates until April 2014 and all Posready until May 2019 via Nlite 1.4.9.3 . Into this I integrate by hand the Intel 1006 driver but only with the entry for iaAHCI_600_6 = "Intel(R) SATA AHCI Controller DEV_7AE2 added by Dietmar" because I noticed, that the Setup routine always takes a wrong variant of this Intel driver during TXT setup, which gives Bsod. With UltraIso I put my laast acpi.sys V5 into the *.iso. The size of this *.iso is 836.354.048 Bytes. This is the minimal size of an original XP SP3 with all updates. And voila, XP installs via this modded Intel 1006 driver direct on the Biostar z690A board, very fast because it is via DVD Dietmar

@Dave-H The only way of debugging the Flex 10 is via its internal PCIe mini port. This works only with the use of an EEpromer, because you have to kill the Whitelist from Lenovo in its Bios chip Dietmar

@Mov AX, 0xDEAD I succeed with the direct Sata install of XP SP3 and the acpi.sys V5 on the Biostar z690A board. But this install works only with install of XP from a real CD. The Intel 1006 driver seems to come in conflict with the video output (some strange symbols appear on screen during install of XP) and then Bsod. The only generic Sata driver until now is the driver from Kai Schtrom Dietmar PS: No other version of Windows bit32 can be installed on the Biostar z690A board, only XP SP3.

@Mov AX, 0xDEAD Hm, with the debug acpi.sys V5 Windbg tells no A5 error but this. Bsod happens, before the DriverEntry point of acpi.sys is reached via bu acpi!DriverEntry https://docs.microsoft.com/en-us/windows-hardware/drivers/ddi/ntddk/nf-ntddk-ioraiseinformationalharderror Dietmar *** Fatal System Error: 0x0000000a (0x00000008,0x00000002,0x00000000,0x8086061F) Break instruction exception - code 80000003 (first chance) A fatal system error has occurred. Debugger entered on first try; Bugcheck callbacks have not been invoked. A fatal system error has occurred. Connected to Windows XP 2600 x86 compatible target at (Sat Jun 4 16:16:53.343 2022 (UTC + 2:00)), ptr64 FALSE Loading Kernel Symbols ............................................................... .............................. Loading User Symbols ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck A, {8, 2, 0, 8086061f} Probably caused by : ntkrnlmp.exe ( nt!IoRaiseInformationalHardError+1b4 ) Followup: MachineOwner --------- nt!RtlpBreakWithStatusInstruction: 808109c2 cc int 3 kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: 00000008, memory referenced Arg2: 00000002, IRQL Arg3: 00000000, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: 8086061f, address which referenced memory Debugging Details: ------------------ READ_ADDRESS: 00000008 CURRENT_IRQL: 2 FAULTING_IP: nt!IoRaiseInformationalHardError+1b4 8086061f 3b5008 cmp edx,dword ptr [eax+8] DEFAULT_BUCKET_ID: DRIVER_FAULT BUGCHECK_STR: 0xA ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) x86fre TRAP_FRAME: 80884f48 -- (.trap 0xffffffff80884f48) ErrCode = 00000000 eax=00000000 ebx=81a659e8 ecx=8088ee10 edx=c000012d esi=00000000 edi=8088ee18 eip=8086061f esp=80884fbc ebp=80884fc8 iopl=0 nv up ei pl nz na pe cy cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010207 nt!IoRaiseInformationalHardError+0x1b4: 8086061f 3b5008 cmp edx,dword ptr [eax+8] ds:0023:00000008=???????? Resetting default scope LAST_CONTROL_TRANSFER: from 8086457f to 808109c2 STACK_TEXT: 80884afc 8086457f 00000003 80884e58 00000000 nt!RtlpBreakWithStatusInstruction 80884b48 80865056 00000003 00000008 8086061f nt!KiBugCheckDebugBreak+0x19 80884f28 8080ea16 0000000a 00000008 00000002 nt!KeBugCheck2+0x574 80884f28 8086061f 0000000a 00000008 00000002 nt!KiTrap0E+0x180 80884fc8 8086cdbd 0100012d 00000000 00000000 nt!IoRaiseInformationalHardError+0x1b4 80884fd8 80856aab 8088ff20 00000000 81a31d68 nt!MiCauseOverCommitPopup+0x5e 80885020 8082d7ad 00000000 81a31e30 809004c5 nt!MiChargeCommitment+0x108 80885044 80900538 00000000 81a31d68 80885158 nt!MmCreateProcessAddressSpace+0x1c 80885058 809004e5 81a31d68 80885158 808851f0 nt!MmInitializeHandBuiltProcess+0x49 808851a0 809f43d0 809c92cc 001f0fff 80885224 nt!PspCreateProcess+0x29a 8088524c 809f4085 80081000 808853e8 809ea96d nt!PspInitPhase0+0x34e 80885258 809ea96d 00000000 80081000 8088fcc0 nt!PsInitSystem+0x33 808853e8 809f110d 00000000 80081000 8003fc00 nt!ExpInitializeExecutive+0x783 8088543c 809f0d97 8088ff20 8088fcc0 80885700 nt!KiInitializeKernel+0x4f6 00000000 00000000 00000000 00000000 00000000 nt!KiSystemStartup+0x2c4 STACK_COMMAND: kb FOLLOWUP_IP: nt!IoRaiseInformationalHardError+1b4 8086061f 3b5008 cmp edx,dword ptr [eax+8] SYMBOL_STACK_INDEX: 4 SYMBOL_NAME: nt!IoRaiseInformationalHardError+1b4 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 5c34e27b IMAGE_VERSION: 5.1.2600.7649 FAILURE_BUCKET_ID: 0xA_nt!IoRaiseInformationalHardError+1b4 BUCKET_ID: 0xA_nt!IoRaiseInformationalHardError+1b4 ANALYSIS_SOURCE: KM FAILURE_ID_HASH_STRING: km:0xa_nt!ioraiseinformationalharderror+1b4 FAILURE_ID_HASH: {929afa2d-924a-a4ee-b8ae-b3ca03308a8c} Followup: MachineOwner ---------

@Mov AX, 0xDEAD Yessssaaa I get Windbg on XP TXT Setup to work. The crazy Biostar board always enables the internal Lan device. After I check check check in Bios, that the internal Lan device is DISABLED, I get connection Dietmar

@Mov AX, 0xDEAD I prepare all for Windbg of TXT Setup of XP. But now comes this message: I edit TXTSETUP.SIF with the following lines but no connection via Lan Debug [SetupData] OsLoadOptions = "/DEBUG /DEBUGPORT=NET /HOST_IP=192.168.2.101 /HOST_PORT=50000 /ENCRYPTION_KEY=1.2.3.4 /CPUFREQ=3000 /TARGET_IP=192.168.2.103 /BREAK" [SourceDisksFiles] kdcom.dll = 1,,,,,,3_,2,0,0,,1,2 kdnet.dll = 1,,,,,,3_,2,0,0,,1,2 kdstub.dll = 1,,,,,,3_,2,0,0,,1,2 Because I have no idea what the numbers behind those files mean, I just copy the entries from kdcom.dll . Now, XP TXT at "Windows Setup" stops, I think because of "BREAK" but no connection via Lan Debug Dietmar

@Mov AX, 0xDEAD Here is the DSDT.dsl and DSDT.raw from the Biostar z690A board Dietmar https://ufile.io/u40d1f36

@Mov AX, 0xDEAD On the Biostar z690A VALKYRIE I get the famous A5 Bsod with the new acpi.sys V5, when I install XP SP3 via the Intel Sata 1006 driver. But the most crazy thing is, when I use my already installed generic XP SP3, no Bsod with Intel 1006 driver and acpi.sys V5 at all. With the generic XP I can boot the same XP SP3 via the Intel 1006 Sata driver together with acpi.sys V5. So, this Bsod will be really hard to debug because it is only shown during TXT Setup of XP. With the acpi.sys 6666 from outerspace ) I get message: Out of memory, Setup cant be continued Dietmar EDIT: Because of this "Out of memory" message I replace the DDR4 ram with a single 4GB stick. Same A5 Bsod, also on the second Asmedia Sata Slot for ALL Sata drivers, that I have. With generic XP SP3 I can change the Sata drivers and through all slots. No Bsod with acpi.sys V5. I can install XP SP3 only direct to nvme device on the Biostar z690A VALKYRIE board.

@Andalu I think, that this USB3 crash happens not randomally on Intel USB3. It depends on, which files where copied first, second etc. . The crash happens, when a lot of files with a size of about 2 Gb are copied one after the other Dietmar

@Damnation Until now, there is no USB3 driver for XP, build from win8.1. But this will be a nice task, also together with ndis6 Dietmar

I thought, that may be the crash on Intel USB3.0 is because to which device the files are copied. But the same crash happens, when I copy whole content of 200 GB from Sandisk USB3.2 to the Optane 905P drive, from which I know, that read and write speed does not matter at all, how big and how much splitted the files are. This test I do on the Asrock z370 k6 again. Now, copy is much faster, only 17 min until crash ;)) Dietmar EDIT: No crash on Asmedia USB3. Whole content of 200Gb is copied from Sandisk to Optane in 20min. EDIT3: Correction: On the Asmedia USB3 only with the own Asmedia USB3 driver no crash happens. With the from Win8 modded driver, it crashs also on Asmedia very fast after 3 min. This makes the situation a little bit more difficult. So it seems, that only the VIA USB3 on XP SP3 works perfect with the from Win8 modded USB3 driver. So it makes sense, to make a try with an USB3 driver for XP SP3 from Win8.1 build. EDIT2: I also test the for XP modded USB3 AMD 145 driver on Intel USB3. Same crash with this driver after 3min on Intel USB3.

Now I make a test with the same Sandisk 256Gb ultrafast USB3.2 stick, the same board Asrock z370 k6 with Win8.1 (all Updates). On the Intel USB3 the situation is not better. Even copy starts faster, after 30 min the speed goes down to zero for about 60sec few times, see photo. No crash. Time for copy is 43min, means compi with FX58m from 2009 is faster. Second run without disconnecting the stick was 40min, may be because of deleted files.. And the most crazy: Win8.1 refuses some files to copy, tell some are malware and delete(!) some on the Sandisk USB3 stick without asking, brrr.. At once I understand, why I like XP Dietmar PS: Asmedia USB3 with same original Win8.1 USB3 driver needs 38min for to copy whole Sanddisk stick.

@Damnation I just download NTLite. May be for win7 it is a nice tool, but it does not work under XP SP3 Dietmar

The Asmedia USB3 chip on the Asrock z370 k6 did not crash. It has the same original win8 driver as before. In 34min the whole 200Gbyte from the Sandisk ultrafast USB3.2 stick are copied. And I also make the same test, without disconnecting the stick, once more I copied ALL, same speed, no crash on Asmedia USB3 Dietmar

Now I just copy the whole content under win8 from the 200Gbyte Sandisk USB stick to the harddisk. There is only the original win8 USB3 driver. Crazy, it starts fast with about 200MByte/s but now it is sometimes slow as much as possible, speed goes down to 5(!!!)kb/s, less than from Floppy disk Dietmar PS: Whole time for to copy is more than 1 hour on Intel USB3 until now. In 40min on the VIA PCIe USB3 slotcard on XP SP3 all(!) was copied. Yesssa, at the end speed goes down as much as possible but does not crash. Then, I copy the same content of the USB stick (without disconnect(!)) to a new folder, and, voila crash, see photo. This simple means, that the Intel USB3 is not so very good

I succeed to change the acpi.sys on the win8 installations DVD. But setup on the Asrock z690 Extreme board still hangs also with the new acpi.sys, modded against DDB Bsod, at the menu, where I get choose the language Dietmar PS: @Damnation Do you remember, which acpi.sys win8 works for you for win8 bit32, modded for DDB BSOD? I make acpi1.sys, acpi2.sys, acpi3.sys and acpi4.sys for win8. Just now I try with acpi4.sys. EDIT: With the for DDB Bsod modded acpi.sys I can install win8 on the Asrock z370 k6 board. So, may be it is not an acpi Bsod, also possible, that the Sata driver from win8 does not work on the Asrock z690 Extreme board.

@Damnation Nlite gives to me often error because of disrupted DVD structure. After a lot of searching I found the nice tool gimagex. This works also under XP SP3. Waaoh, now I can edit any *.wim files simple with copy and paste under XP. And I set up a new version of Ultraiso. Now I have new win8.iso with my for DDB error hacked acpi.sys and soon I test it Dietmar

Hi, can somebody here write a short Tutorial, how to change a single file acpi.sys in install.wim from win8 bit32? And can I use ImgBurn to make a new win8.iso from all those files extracted from the original win8.iso? Best Tutorial would be for XP SP3, but I also can use Win7 SP1 or Win8.1 Dietmar

@daniel_k I cant install win8 bit32 on the Asrock z690 Extreme. When the message about to choose language appears, compi hangs Dietmar PS: May be, this happens because of DDB error in the acpi.sys of win8. But when I try to edit the win8.iso with UltraIso, I see only a *.txt file. With Virtual Clone I can see all the files on the win8 DVD, so I can extract them and change acpi.sys against the DDB error modded one, but how to put this install.wim with modded acpi.sys back into the win8.iso?

@Damnation We want to make things better. For me it is also a hard job, to look deeper at this error, because it only happens after transfer of such a lot of files through USB3. Yesterday in the evening I was soso much astonished, that with the same USB3 driver ported from Win8, the same XP SP3 installation but now USB3 via VIA Pcie slotcard this long standing error on Intel USB3 not happens Dietmar