schwups
Content Type
Profiles
Forums
Events
Posts posted by schwups
-
-
14 hours ago, jumper said:
Please clarify "anymore". (FlsAlloc didn't change in .15)
Un-UPX opera.dll
Edit CORE.INI to disable Fls in modes lower than WIN2K3
Try ME mode.
Solved: in CORE.INI add:
[DCFG1.names.98]
KERNEL32.FlsAlloc=none
[DCFG1.names.Me]
KERNEL32.FlsAlloc=none
[WIN2K3.names]
KERNEL32.FlsAlloc=kexbases.0
I didn't say this behaviour occurred with version 14, not 15. Yes, adding these entries solves it! Opera 10 runs up to mode Win2KSP4 again.
0 -
Opera 10 (10.01, 10.1, 10.63) doesn't start anymore with "Use default compatibility options (KernelEx is enabled)". Failed to load Opera.dll: A dynamic link library (DLL) initialization routine failed. It runs, if I disable KernelEx for Opera.dll.
The last lines of ApiHook log:
1 ffc55877 [OPERA.DLL]0134e75a:<Kernel32.DLL>FlsAlloc(bfa4a2aa)
1 ffc55877 [OPERA.DLL]0134e75a:<Kernel32.DLL>FlsAlloc ffffffff1 ffc55877 [OPERA.DLL]00404cbe:<Kernel32.DLL>ExitProcess(bfa4cc8c)
0 ffc55877 End of ApiLog for C:...
0 -
22 hours ago, MiKl said:
The newly released version 7 of Notepad++ works fine but on one of my machines I had to rename notepad's plugins folder to plugin otherwise the app would start with an 'unknown execption' message. Weird ....
I've no message on start.
There is a path information in Menu - Plugins - Plugin Manager - show - Settings. Maybe a reinstalling will correct your path.
0 -
Hello jumper,
I test Release 14 on three computers (ME). So far I can't recognise serious problems. On one machine I've the MaxaCookie Manager, it opens, but doesn't work anymore. Error: A dll of the app is not registered or available. After I went back to version 13, reinstalled MaxaCM and I restored the Registry, the error remains. So I guess it has nothing to do with KeX and Release 14. I could reinstall whole KernelEx, too. It's strange that it happened after the update.
Whats the aim of R14? Are there special programs to test?
Is there a ProcWin documentation out there?
@MIKL: "Copy and Paste broken" Is your entire system affected or only NotePad++? Please tell which NotePad++ you use.
0 -
Can you read the label of the lan chip? Maybe you need a magnifier. It can be very small. Also you should verify the chip with a tool like Everest or Aida ... .
0 -
You can try following utilities for 9x, too: DiskSpeed32 and Roadkil's Disk Speed. Usually HDTach (2.70) runs proper on my ME computers and gives the highest results of the tools.
0 -
Usually I use Opera 11.64. 12.02 makes no difference on msfn.org. I have a question to the appearance. I see lines or boxes instead of the pins and symbols, but on one computer this Site looks rather well, similar to XP. So it should be possible to have a well-arranged appearance on Win ME (and probably on 98, too). Up to now for me it isn't clear why. I ruled out Preferences/Style options and Kext. It might have to do with one or more dll files in the system folder or an update. Maybe someone of you knows it.
0 -
For the order of installation see the Installation Guide of U98SESP3: https://www.techtalk.cc/viewtopic.php?t=65.
KernelEX: Yes, you have to install a full release like 4.5.2 first. After that you can install KernelEx 4.5.2015.13 updates.
1 -
Of course, there is no support anymore. This post was last edited November 2011 by galahs.
There is a snapshot version of Opera 10.70. Certainly 10.66 is a typing error.
0 -
So far Version 13 is Ok. Updated on two computers (Win ME).
0 -
Quote
The error: "NVIDIA Uninstaller utility performed an invalid memory access.
The Driver Cleaner Pro 1.5 works.
1 -
Yes, latest FlashPlayer 22 doesn't work anymore.
The browser creates an error message on crash. Also a look into the ReleaseNotes might be worth.
0 -
You find the chipset driver here. The bearwindows 9x driver (vbemp) for graphics could work with the integrated GMA X4500 without any kind of 3D support. The driver is tested with INTERNAL Intel G43 Graphics (GMA X4500). Another possible driver is the SCITech snap graphics driver, but probably it is untestet. The better choice is a PCIE NV 6xxx or NV7xxx or PCIE ATI up to Radeon X8xx graphics card. Don't use graphics cards with more than 256MB. Some BIOS's permit ATA/IDE configuration settings like legacy or compatible mode to run the hard disk with DMA mode (fast). If this mode doesn't exist or work, you have to purchase the R. Loew's SATA driver. Otherwise the HDD runs with very slow "DOS compatibility mode". A driver for onboard sound isn't available. Be aware there is no guarantee that 9x/ME runs on a Q43/Q45 system as desired!
0 -
Probably upgrading to ME will not solve this problem. Search for Standby or Hibernate here in this forum, if the Search Box still exists since forums upgrade. You'll find a lot of topics about standby problems. Maybe you find a solution. Changing BIOS settings could help. Standby problems occur very often on 9x and ME after graphics driver installation . I always shutdown my PC's with about three clicks and standby is set to never.
0 -
Hello Flasche, meanwhile PRB opened a topic about the update problem:
0
-
You can try another DVI cabel and you can give other drivers a shot (77.72, 82.16 or 82.69...). Probably you have no other graphics card to test.
My monitors have a maximum resolution of only 1280x1024. Thus I have no practical experience, whether a NV driver bug could be given.
0 -
Probably it doesn't make sense to to talk about a i810. This chipset has a 370 pin CPU Socket and no AGP Slot. The Pentium 4 needs a socket 478 and a Dell Dimension 4300 should have a i845 chipset. Or is it a special version?
CamTron, apart from the possible RAM problem, did you check your HDD partitioning and the free space of the partitions. Do you have the WIN386.SWP file on partition C? I had freezing OpenGL programs because of low HDD space. A few hundred MB can be insufficient.
0 -
Confirmation:
System Win ME, KernelEX 4.5.2:
Foxit Reader 5.4.5.0124: The direct copy is possible to Notepad++ or OpenOffice writer.
System Win ME, KernelEX 4.5.2015.12:
Foxit Reader 5.4.5.0124: Error message "Invalid User32.dll, cannot find SetLayeredWindowAttributes"
Faultlog:
Datum 04/13/2016 Uhrzeit 12:26
FOXIT READER verursachte einen Fehler durch eine ungültige Seite
in Modul KERNEL32.DLL bei 0177:bff8e1ad.
Register:
EAX=c002fa54 CS=0177 EIP=bff8e1ad EFLGS=00010212
EBX=00000000 SS=017f ESP=01c3fe08 EBP=01c400a4
ECX=00000000 DS=017f ESI=01f01860 FS=3ba7
EDX=015dd8e0 ES=017f EDI=011e9cf0 GS=0000
Bytes bei CS:EIP:
53 8b 15 f4 bc fb bf 56 89 4d e4 57 89 4d dc 89
Stapelwerte:
Versions 4.x: Copy function only by "text viewer" of Foxit.
Apparently a copy to MS Editor or WordPad is always impossible, it doesn't matter which version I use.
0 -
I am not sure what you mean. A screenshot would be helpful. Or do you mean those | in the menu? Then change the fonts to e.g. Tahoma.
0 -
KernelEX will not help you to install drivers! KernelEx has the aim to run Windows 2000/XP-only applications on Microsoft Windows 98 and Microsoft Windows Millennium operating systems.
Make sure you have the Microsoft Layer for Unicode version 1.1.3790.0 unicows.dll. It only needs to be inserted into the system folder.
0 -
I successfully downloaded the file one hour ago and installed version 12. Win ME started without a problem. Also I ran a lot of programs without error messages. Kexbases has considerably become bigger.
0 -
What's the size of the inf file and did you identify your card? The size of the drver inf file version 3.1 on linksys.com is only 32KB. That is OK. There is no need to reduce it!
Shorten/reduce:
Use a Editor or Wordpad program to open and edit the file. Inf files are divided into different sections. e.G.: Find the sections with the devices or components. You can delete all devices except yours. Usually Win2k, XP, Vista... specific sections aren't needed. ....
0 -
I don't know the wifi card wpc54g. I searched on the support page and found this on linksys.com. There are drivers in Hardware versions 3.1 and 7.1. Version 3.1 is for Broadcom devices and contains a 9x driver. I found in the inf file of 7.1 "Atheros". AFAIK Atheros never supported ME or 9x. I don't know your version. What exact card do you have? The Tool Everest or others can identify the card. Apparently there exist different drivers for different vendors. Make sure that your card is in the inf file of your driver CD and that the size of the inf file in "D:/Driver/9x" is less than 60KB. On my ME systems it must be less than 52KB. If necessary it has to be shortened.
I had the case to shorten the 9x driver inf file of a Broadcom onboard Ethernet device. Also I had experienced that a LAN driver, maybe it was this Broadcom onboard Ethernet device, was only accepted from drive C. I am not quite sure any more.
0 -
GoogleEarth doesn't start, if I use the ROS 0.4.0 Wintrust.dll instead of Wintrust of WinME.
GOOGLEEARTH caused an exception c06d007eH in module GOOGLEEARTH.EXE at 0177:004023be.
Registers:
EAX=0064fd1c CS=0177 EIP=004023be EFLGS=00000246
EBX=00000000 SS=017f ESP=0064fcc0 EBP=0064fd10
ECX=f0ecdf30 DS=017f ESI=00404f3c FS=6d5f
EDX=82e5e0dc ES=017f EDI=00000000 GS=0000
Bytes at CS:EIP:
8b 45 d8 e9 f3 00 00 00 57 ff 75 e8 ff 15 54 40
Stack dump:
00400000 0000002c 00000000 00000024 00404f3c 00406250 004041c0 00000001 00404f86 00000000 00000000 0000001f 82e5df00 82e5e07c 00406258 bfa41b380
The browser creates an error message on crash. Also a look into the ReleaseNotes might be worth.
Hello Flasche, meanwhile PRB opened a topic about the update problem:
KernelEx 2022 (Kex22) Test Versions (4.22.26.2)
in Windows 9x Member Projects
Posted
Jumper, do I understand correct, that you mean the dll files newly hosted by drugwash and not the compiled installers and code he hosted nearly two years ago? Drugwash removed the whole KernelEX folder.