Jump to content

madmungo

Member
  • Posts

    25
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    Australia

Everything posted by madmungo

  1. Hi, the update that causes the update loop for me is KB952709. Seeing as I remove QoS for AV files and this update improves the performance of Windows Vista SP1-based computers by reducing audio and video (AV) stuttering among other things. I suspect this is the problem.
  2. OK it worked. now have windows firewall working, must be a dodgy update.
  3. Hey guys just noticed this happened to me AFTER doing a fresh install and after a few reboots for software instalation that after doing a windows update with all (24) post SP1 updates that the firewall was stopped and when I tried restarting it it came up with the same error as in the first post. Have just copied the polstore.dll.mui file and am about to reboot to test. will report back in a sec.
  4. Did that. no change. Next thing to do is try a reinstall and see if it complains about missing games explorer.
  5. FEAR needs it. I have placed the x64 and x86 versions of gameux.dll into my ws2008 install and when I try and run fear it starts about 2000 instances of rundll and rundll *32 and slowly closes each one then pops up the FEAR has failed to start error message. Another game I have needs the dll file but I think it will do the same thing.
  6. I would also like to know this. Can someone tel me which files Games Explorer uses.
  7. Anyone know which files are needed for Games Explorer. Would like to add it.
  8. madmungo

    Sever 2008

    as per the title, dose vlite support server 2008. If it doesn't will it in the near future
  9. I can also confirm this happening in x64 versions of windows. I also remember network DDE stuffing something up on x86 windows but I can't remember what.
  10. I have no Idea what is causing it but if you change the burning engine from the internal one to Mkisosf then make your image it will work as it happened to me. If you burn the image directly to disk you do not get this error. This has happened with 3 different Windows cd's, one origional XP, one MSDN xp+SP2 and one XP VLK disk.
  11. Anyone using Grisoft's AVG plus Firewall need to keep Dial-up and VPN Support otherwise the Firewall fails to start with the following error The dependency service does not exist or has been marked for deletion. (1075)
  12. After downloading this Billboard I can not get the fonts to show correctly during a test install. They will show OK with WinntbbuED but are replaced by some other font during an actual install. Is there a way to have the new font recognised during the start of the install.
  13. Yes I can confirm this. I allso get STOP: 0x0000007B error message after the initial dos file copy section. I am using the latest BASE 6.03 and MS 6.02.1. The only version I have it working with is 5.10 which is on my last win install CD. I have downloaded the latest non beta drivers from SilImage site version 1.3.61.0 10/7/2005. and integrated with nlite and had no problems. hwids.txt
  14. @Happy_ct Just downloaded your files and it is being caused by the Play audio in WPI option being set to YES. Set it to NO and it works without errors. I also set this option in my config,to test, and get the exact same error. Same file and same line number. Dose not matter which of the 4.x versions used all create the same error when the Play audio in WPI is ticked. Hope this solves your problem.
  15. I had this problem and found out that I had an extra back slash in one of my programme install paths i.e, %CDROM%\\Install\setup.exe instead of %CDROM%\Install\setup.exe. In your config.js you need to check that there is only two back slashes in all of your install paths, will look something like %CDROM%\\Install\\setup.exe when correct. This was driving me mad and I was just about to give up when I started to manually edit config.js and found the error.
  16. Will this work with an nLited xp disk. I have tried it but it says Incorrect path to Windows Installation CD when I click on build. I have also goten the Run-time error '9':Subscript out of range error when I built a quick test disk.
  17. This is taken from the Novell discussion Server novell.support.netware.client.winnt-2x-xp in reply to a similar question to yours. > Is there a release date (or beta date) for the Novell Client on > Windows XP 64-bit? Is there a client planned? Currently, Novell is still evaluating whether there is a real demand for a 64bit client. I suggest you let them hear your voice by submitting an enhancement request through http://support.novell.com/enhancement/ Hope this help.
  18. Just got the same error when trying to get then LAN and MassStorage Packs. Base pack downloaded OK via the cmd file.
  19. I am using the 5.0.4.8 version and am getting the same error as avis. I have just downloaded the new base pack 5.0.4.9 and will give that a go tonight. Will report back with I hope good news. Replacing the missing files manually and using the driverpack multiboot method did not work.
  20. No none of the files are in the I386 folder. No it is only a single boot CD. I will copy all the missing files into the I386 folder and see what happens. I will also try the DriverPack Multi-Boot tutorial and see if it works also.
  21. I am having problems with 3waredrv.sys file not being found during the txtmode setup. I have the latest base and driver packs and used method no 2 . Had a look around and did not find any fix for it.
  22. b0r3d, Could you make a version with the needed .NET bits included, similar to the nLite runtimes, for those of us that do not install .NET. This link Thinstall may help make it easier to do, or you could contact Nuhi and ask how he did it.
  23. Hi guys I have no problems whatsoever. Everything works like a charm. Here is what I did. 1. Download the file in serialz opening post and extract. 2. Open the html file and click on the link to pyrons post and grab the setup.ex_ file. 3. Uncab the ORIGIONAL setup.ex_ file from your I386 folder with the following command expand SETUP.EX_ setupORG.exe and copy SetupORG.exeto your I386 folder. 4. Copy the setup.ex_ you downloaded from pyrons post into your I386 folder. 5. Compress your driver files as *.7z files. Only select the files inside the root folder of the drivers and name them acordingly. 6. Put the Compressed Driver FILES inside the directory named ->$OEM$/Driverz. 7. Put the following into you I386 folder, 7za.ex_ Presetup.cmd XRep.ex_ DevPath.ex_. From the file downloaded in step 1. 8. Add the following lines to TXTSETUP.SIF under [sourceDisksFiles] 7za.exe = 1,,,,,,,2,0,0 Presetup.cmd = 1,,,,,,,2,0,0 XRep.exe = 1,,,,,,,2,0,0 SetupORG.exe = 1,,,,,,,2,0,0 DevPath.exe = 1,,,,,,,2,0,0 You should now be done. I did not use pyrons Presetup.cmd file only the one out of serialz pack. I also found that if you use this method you cannot use the driver integration of Nlite as the drivers added by nlite do not install. Edit: Fixed up Step 7 to use the corect files.
×
×
  • Create New...