Monroe

Fredledingue ... I have been following your message at the KM forum ... there are a couple posts there since you were last there, one is asking you a question ... maybe you read them. Now as to adding plugins in KM ... it is very simple, as I mentioned in an earlier post. Download the KM Extensions Manager and in 2 seconds you can add a plugin. The program does it all ... of course you can add plugins manually which isn't too difficult but does take more than 2 or 3 seconds ... maybe 30 seconds. Well anyway, the KM Extension Manager for 9x will work in KM 1.5.4 or KM 1.6. Once you add the KM Extensions Manager, you will have a link under the Help tab to all the extensions (plugins) that you want. Couldn't be easier. HTH KM Extension Page: http://kmext.sourceforge.net/ ... you should see the link to the KM Extensions Manager ... 9x and NT versions. I download the plugins I want and save them to a folder and then when I use the KM Ex Manager, I just point it to that folder and the plugin is added. When you install the Extension Manager you should then see a little green icon in the above KM toolbar ... it looks like a green puzzle piece to me. You will also see under Tools, at the very bottom, Extension Manager. Perhaps Firefox plugins are also this way, I don't know but the KM plugins are 7zip and the KM Ext Manager will unzip and install the plugin in a matter of seconds. I usually install my plugins offline with only one KM web page open. Don't know if plugins can or should be installed while a person is online. Seems to me offline would be better doing that.

Multibooter ... your very welcome. As I mentioned earlier, I started using K-Meleon last Oct ... never saw much mentioned about it here in the forum so I thought no more about it till September (2010) when I was able to get the newer KM 1.6 working with Windows 98SE. I just thought I should make mention of it, in case some others might want to experiment with the newer 1.6 version or just try KM 1.5.4. It took me maybe 6 months to "fine tune" K-Meleon to my liking. As I also mentioned earlier, the only problem I have had with KM 1.5.4 (and it's very rare), at a few web sites a box dealing with JavaScript will pop up saying I think (haven't seen the box for awhile) scripts or page is loading slow and then you have to hit STOP or CONTINUE ... but all my pages mostly load very fast with KM v1.5.4 ... KM v1.6 is supposed to handle JavaScript much better and when I go to those same web pages (only 2 or 3 pages that I've run into) with KM 1.6 there is no box popping up. Of course a person can just turn JavaScript off in Tools / Privacy but with some web sites, I have to have JavaScript on. I have never used Firefox but I have read at the KM forum that KM is similar to Firefox but faster. Many Firefox users have switched to K-Meleon ... some call it the "sister browser" of Firefox ... I guess many things are similar. Now I missed this news from Oct 27th at the KM forum, just saw it a few minutes ago ... desga2, whose preBeta 1.6 version I talk about in this thread, has announced a Beta version is due out anytime. From KM forum: K-Meleon 1.6 Beta is coming. Posted by: desga2 Date: October 27, 2010 02:53AM Possibly I can release K-Meleon Beta very soon, this weekend or next week. I'm trying to build the web default language preference panel: http://kmeleon.sourceforge.net/forum/read.php?1,110180 I will release K-Meleon 1.6 Beta when I finished this implementation. Although you can't see us, we are working in the shadow. Be patient my friends. ---------------------------------------- So that's a new development. duffy98

Fredledingue ... saw your post. I see there are a couple replies but no help since they are not having the same problem. I also tried both KM versions at Yahoo Finance and had no problems like you are experiencing. I'm always at Yahoo Finance and never had any problems there. Perhaps something will turn up or it may be something on your computer but the big question ... what? I sure hope you can get it all squared away. Yes cure, others at the KM forum have commented about updating the web site homepage so maybe that's something for the future.

erpude8 ... yes, KM v1.6 preBeta must have WinXP SP2 compatability ... that's what siria told me to do at the KM forum ... siria post: "My KM1.6 is set to XP-SP2. Remember that if moving the exe elsewhere, the compatibility is forgotten and must be set again..." but if Win2000 also works then that's good to know. As I said before, I'm very happy so far with KM 1.5.4 and the KM 1.6 preBeta running on my machine. No problem about telling me about KM not being Beta ... I went back and corrected all my posts to add "pre". May have missed a few. In my mind it was Beta until you pointed that out. Yes Fredledingue, that's what I like about configuring and setting up KM ... fairly easy. I did have to get help on a few things. Have you installed the KM Extentions Manager to add plugins. They have "doctored" or "changed" the flash dlls to work with downloading videos ... there are versions for 9x and NT. Also, one thing I missed was when you right click on a link you see "Copy Link URL" but I missed not being able to just copy the link name to use as a folder label, like you can in IE6. Someone at the forum asked about that and there was an easy fix for that ... I will put it here, in case you would also like that option. You would go into Edit / Configuration / Menus ... then add: !LinkCopy{ &Copy=ID_EDIT_COPY|ID_COPY_LINK_LOCATION } .... it was awhile before I learned about that ... one of the things I wasn't happy about that the KM browser didn't have until I found out how to add it. Anyway, I'm sorry that KM is crashing with that one page or web site. Go over to the KM forum and post your problem ... explain everything and put the link there to that page ... I'm sure siria, disrupted, guenter or someone will try to help you and maybe get things figured out. They are like the people in this forum, always trying to help and solve any problems. I had a problem with a Windows 98SE dll ... I had downloaded a Swedish version of kernel32 but didn't know it ... hard to tell whether a dll is English or another language, if it's not labeled. ... disrupted came up with the reason for my problem since it happened to him when he downloaded a Spanish dll and didn't know it till he started seeing Spanish at places in his OS. Anyway, I'd give the KM forum a shot. Maybe that might be a problem that the KM people need to know about. I know a few people have posted problems with some sites but I didn't really follow it too much. All the sites I go to seem to work OK for now. Don't give up ... you will learn more each week. I've been with KM since last Oct and impressed with everything so far. I would think KM v1.5.4 would be the one to work with since it is the last stable version out for Windows 98SE or 9x ... the KM 1.6 version is just something to "experiment" with and see how far you might actually go with Windows 98SE. I guess a lot depends on how someone has their Windows 98SE machine set up. I never added Revolutions Pack 9.6 to any of my notebooks but I have all of MDGx's updates on all my notebooks, KernelEx, The Proxomitron, ZoneAlarm 4.5.594 and other stuff ... but maybe others will have more software running or newer versions and may have a conflict with K-Meleon. Hard to say that what works on one machine will work exactly the same on another. I will say that KernelEx really is one great program for us 9x users ... sure helps using an older OS. I do intend to experiment with Revolutions Pack 9.6 one of these days to check it out.

Yes, there is a desga2 preBeta but it is very hard to find, it isn't at the usual KM download page or wasn't in September when I was asking questions about KM v1.6 ... siria from the KM forum posted the link for me. The preBeta version is by a person from Spain (maybe) and seems to be his own project at this point, just not completely sure. I guess I left the "pre" off my other postings, I forgot it was preBeta but it does work with Windows 98SE very well for some people, including myself. My knowledge on all this is limited but more than I had a month ago. This version would be the newer version to use with more bug fixes and enhancements. K-Meleon v1.5.4 still works OK for a fast browser and should be stable. ------------------------ Posted by: Matt Date: September 20, 2010 08:52PM duffy, preBeta (alias cp4) is currently the latest release. It has preferences panel fixed and some nice new features. Good luck with testing preBeta under win98. ------------------------ Re: 1.6a4 Preferences panel. Posted by: desga2 Date: August 29, 2010 02:53AM Download preBeta (alias cp4) {Mirror} Please use a fresh installation, not update previous cp versions. Changes since last cp3 uploaded: + Support full zoom and default zoom (zoom.defaultPercent) Preferences (F2) -> Page Display, and replaced code in zoom.kmm + Others little fixes and minor implementations. Dorian is working with this other features: * @SHistory replaced to history() in menus, but not work, crash K-Meleon at startup. Thanks for test and report. http://kmeleon.sourceforge.net/forum/read.php?2,109196,110032#msg-110032 Someone at the KM forum did post this after using the "pre" Beta ... he is a contributor to KM ... Posted by: SoerenB Date: August 30, 2010 10:31PM Hi, all, as far as I'm concerned, this could safely be called a beta1 and go to the sourceforge download pages now. Cheers SoerenB ------------------------ This post from siria got my interest to experiment with the newer KM version. Posted by: siria Date: September 17, 2010 01:58AM Nice links danny Must say I'm rather happy about the current development version: http://kmeleon.sourceforge.net/forum/read.php?2,109196,page=2 desga2 Download preBeta (alias cp4) There are still some minor issues, but considering that gecko1.9 is not supposed to run on win98 at all, it's running already very, very nicely on mine. And those 'issues' seem to be rather related to the beta-state than to my good ol' trusty win98se system. --------------------------- Hope this helps some ... sorry about the preBeta mixup. ... just to add this ... I am happy using KM v1.5.4 but I just wanted to see if the newer 1.6 version could work with Windows 98SE on my machine. I asked that question very early in 2010 at the KM forum and got a "no". It wasn't supposed to work with 9x at all. So I thought nothing more of it until September. Decided to ask the same question again but this time I still got a "no" but also a "maybe yes". Then a person named siria posted saying they were using the current desga2 cp4 preBeta version with Windows 98SE and KernelEx installed. So I just wanted to see where things might go for me. Everything seems to be working for now and I have both KM versions on one notebook to go back and forth with. One day when the 1.6 version is "final" then if all is still OK on my notebook, I will probably just use the one K-Meleon version. If you do have KM v1.5.4 already set up and you are using the Klassic skin and are trying out KM v1.6 then you can just delete "toolbars.cfg" in the v1.6 Klassic skin folder and replace it with the "toolbars.cfg" from v1.5.4. Should look the same with all your settings from v1.5.4. That will save some time ... I'm sure any KM skin can be transferred that way ... I just happen to like the Klassic skin.

Fredledingue ... don't give up yet. Why don't you go over to the K-Meleon forum and post the problems you are having with KM v1.5.4 ... you don't have to be a member there to post or you can join in less than 30 seconds. Anyway, I was using the old KernelEx Final 2 version with KM 1.5.4, however I don't think you need KernelEx with v1.5.4 but I'm not sure, you could ask that at the KM forum ... but to use the newer KM v1.6 preBeta with Windows 98SE you must have the latest KernelEx version installed. I think the v1.6 project is by someone from Spain, not 100% sure about that. Ask for help in the "General" forum ... you will probably get some ideas, they are very friendly there and try to help everyone. I was ready to give up on being able to use the new KM v1.6 with Win 98SE ... had one problem here, one problem there but one by one with the help of a person named siria, I got v1.6 working. I have both KM v1.5.4 and v1.6 on my notebook and everything is running OK ... 100%. Yes, I did have to get help for a few settings ... I like the Klassic skin folder (in the Skins folder)... it's in both KM versions ... it's close to the IE 6 look, if you like IE 6 ... and if you like lighthouses ... I asked for some help in finding a lighthouse throbber to put into K-Meleon. I think two weeks must have went by and finally a person named disrupted offered to make one (always there posting or helping with plugins), just post a picture of what I had in mind he posted ... I like the famous one at York, Maine. He had it done in no time and it looks great ... going around in the upper right corner where the KM dragon breathing fire or IE 6 revolving globe would be. That lighthouse is fantastic, only seconds to change in the Klassic folder ... with the KM Extensions Manager (for 9x) ... there are two for NT and 9x, you can add any plugin you want in seconds. I started using KM last Oct (2009) and never use IE 6 anymore ... I keep IE 6 on my notebooks and updated with MDGx's updates ... but only in case I might need it. I don't know if you really need KernelEx with KM v1.5.4 since they have a separate KM 9x download but there is no 9x download for v1.6, since Win 98SE wasn't supposed to work with the newer v1.6. ... that's where the new (latest) KernelEx comes in ... use XP Sp2 compatability and KM v1.6 runs on Win 98SE. The Spell Check plugin is great ... as I type this message, it checks every word. Anyway, take a few minutes and post the problems you are having at the KM General forum ... may just be some settings or something ... believe me, when I first started using KM there were several things I had to get help on ... mostly settings and now I have everything pretty well tweaked or set the way I want the browser to work. I was able to take the newer User Agents in the KM 1.6 version and replace the older User Agents in the KM 1.5.4 version. Didn't know how to do that a few months ago ... figured that one out on my own ... it's a learning process but you end up with a very fast browser set up the way "you" want it set up. I would say to work with KM v1.5.4 first, get familiar with it, get everything set up the way you want it and then maybe experiment with v1.6, if you want. Most of the settings are in Preferences but there are a few other things that you made need help with as you progress. HTH ... ... just wanted to add, I see you have a post about javascripts ... KM v1.5.4 sometimes does have a problem with javascripts at certain web sites but a little box will pop up asking to either "stop" or "continue" ... I think, I don't see it too often but KM v1.6 is supposed to handle javascripts much better. However, did you notice in KM 1.5.4 under the Tools tab (top toolbar) if you click on Privacy you turn off a whole bunch of stuff including javascripts ... there are 11 items there that can be turned off and on in a second. K-Meleon Forum ... http://kmeleon.sourceforge.net/forum/

Came across this Netgear Wi-Fi card for sale at Amazon. I thought I would post this information in case someone else might need a Wi-Fi card that will still work with Windows 98SE. I had two from some years back and they weren't cheap but it was a Netgear and installed OK for Windows 98SE. I am aware that many newer notebook computers no longer have slots for PCMCIA cards which made me think that these type of cards may start to disappear or get hard to find one day. So I thought I had better hunt around for a spare or two of the Wi-Fi cards and ones that still work with Windows 98SE. I found a good deal at Amazon from an Amazon seller ... I bought one from this merchant for $14.95 with free shipping included. A few days later I saw that they had dropped the price to $13.95 (been that way for two weeks) but to get free shipping you have to order 2 to total over $25 for Amazon free shipping. I paid over $30 apiece back in 2006 so these cards have dropped in price quite a bit. It is brand new (not refurbished) and works with Windows 98SE. Yesterday, I decided to get two more just to have on hand. Maybe these cards will still be around in 5 years if I were to need one, I don't know ... so many things for Windows 98SE have disappeared over the last several years. "The WG511 is a PC Card and requires a Pentium class PC with an available 32-bit CardBus slot for installation. It supports Windows Vista and is also compatible with Windows XP, 2000, 98SE, and Me. Setup is as simple as inserting the card into the slot and installing the included software. A built-in stub antenna helps you receive a strong signal for the fastest possible speeds." When I got the package there was a note that it should also work with Vista. I went to the Netgear website and downloaded the drivers from there. http://www.amazon.com/Netgear-WG511NA-Wireless-Pc-Card/dp/B00008I9K8/ref=sr_1_5?ie=UTF8&s=electronics&qid=1288192384&sr=8-5 Amazon has started selling these cards but their price is a little higher than the seller's price ... yesterday the Amazon card was over $14 but today it is $13.99, but that can change daily. Look on the right side for State Street Deals ... should be the first one listed for $13.95. Netgear Driver download: (It comes with a CD, so the driver is also probably on it. I just went to the Netgear site for the latest driver and it did work for me with Windows 98SE. WG511v2 Software Version 3.2 http://kb.netgear.com/app/products/model/a_id/2569 ...

Just a mention if there are some here using Windows 98SE with Proxomitron and the Sidki Configuration filter set ... he has released a new set of filters but with sad news. He will, I guess, be leaving the Proxomitron project. I had missed the announcement ... I knew a new config set was due at any time. I hope he will linger around but the project has taken a lot of his time. ---------------------------------- http://www.dslreports.com/forum/r24979425-Proxomitron-Sidki Proxomitron Sidki You may have seen the post from siljaline in the Security Product Vendors forum: »[Free] Sidki's Proxomitron filter set Oct 23 2010 There is some other news from Sidki at The Un-Official Proxomitron Forum: »prxbx.com/forums/showthread.php?···0&page=3 Yesterday: I am discontinuing work on Proxomitron now. However, this isn't necessarily the end of this project. There is an extensive documentation for developers, containing matching examples for every piece of code (well, almost), explanations of filter expressions, etc.. Thus, no information is lost, and someone else (should be plural) could continue right where i left. Some of this information and links aren't suitable for public entertainment, but JJoe has a copy. So, if sometime someone seriously wishes to continue with config development, just get in contact with him. Have fun! Sidki, Thanks for all your hard work !!! -------------------------------------- He will be sorely missed by many as his Proxomitron filter set was the best for Scott Lemmon's program, IMHO: http://www.proxomitron.info/ sidki configuration set: http://prxbx.com/forums/showthread.php?tid=1687 *** Just will ad ... Proxomitron was originally made for Windows 98 (SE) but I have read that people also using XP are using Proxomitron ... not 100% sure about that or Vista. ... found this info: System Requirements The Proxomitron was originally developed on a Pentium 120, and will work fine on such a system depending on your connection speed and the number and types of filters you use. Faster connections (like DSL and Cable) may require more CPU horsepower to filter. It should also work fine on Win 95,98,ME,NT,2000, and XP. About The Author: Scott R. Lemmon originally developed the Proxomitron for his own use. He then decided to release it to the public and made himself available to users via email and in several Proxomitron user-discussion groups. His support, like his program, was always free. With the release of Naoko 4.5, Scott discontinued all further development and support of his program and pulled the official home of Proxomitron off the Web. We respected his decision to move on and wished him all the best -- which is, after all, what he consistently gave to us. Sadly, one year later, Scott died -- but his brilliance of mind and spirit lives on. Simply put, Proxomitron is a reflection of its creator: To know Scott's program . . . is to know Scott Lemmon.

hottext ... yes, should of thought of that but didn't at the time. Some days I'm at the top of my game and the other days I squeak by!

Control/Alt + Delete Problem Solved ... I may have been given a solution to my problem and a simple fix ... to install the newer version of KernelEx I needed to reinstall the kernel32.dll ... for the other computers I extracted the kernel32.dll from my Windows 98SE cd ... but for the Dell when I was doing the install of the newer version of KernelEx, I did not have the Windows 98SE cd at hand and went on the internet to find a copy of the kernel32.dll. I thought I found one that looked OK but it must have been a Swedish version. They all say "kernel32.dll" I guess ... anyway, that now makes sense to me. A very knowledgeable person at the K-Meleon forum came up with the idea and a picture of what I am seeing. He had run into a similar problem with an dll needed for XP and it changed some things into Spanish on his computer. I am almost 100% sure this is what happened to that one computer. From K-Meleon forum: I just copied what he said about his download problem. "you downloaded the file, and replaced it in dos maybe.. but that kernel32 you got from there is swedish not english because that site have libraries in many languages and the sites never tell you the locale. It happened to me before when i downloaded an ie xp dll which i've maimed and later found out many of ie security prompts turning into spanish" So I learned about something I was not aware of.

I may have been given a solution to my problem and a simple fix ... to install the newer version of KernelEx I needed to reinstall the kernel32.dll ... for the other computers I extracted the kernel32.dll from my Windows 98SE cd ... but for the Dell when I was doing the install of the newer version of KernelEx, I did not have the Windows 98SE cd at hand and went on the internet to find a copy of the kernel32.dll. I thought I found one that looked OK but it must have been a Swedish version. They all say "kernel32.dll" I guess ... anyway, that now makes sense to me. A very knowledgeable person at the K-Meleon forum came up with the idea and a picture of what I am seeing. He had run into a similar problem with a dll he needed for XP and it changed some things into Spanish on his computer. I am almost 100% sure this is what probably happened to that one computer. From K-Meleon forum: I just copied what he said about his download problem. "you downloaded the file, and replaced it in dos maybe.. but that kernel32 you got from there is swedish not english because that site have libraries in many languages and the sites never tell you the locale. It happened to me before when i downloaded an ie xp dll which i've maimed and later found out many of ie security prompts turning into spanish" So I learned about something I was not aware of.

Problem solved with some help from another forum. I was going to delete all this but in case someone may be having the same problem, I have posted in message #3 the reason I probably had this happen. ------------------------------------------- Just a few days ago I discovered a problem on my one notebook computers ... I posted a message at the KernelEx message board yesterday, thinking there "might" be a connection with the fact that I had recently installed the newer version of KernelEx 4.5 RC 4 ... have had no replies and I can't be sure there is any connection with this problem and KernelEx. I am posting here also to see if anyone else might report the same problem on their computer or maybe someone could shed some light on what might be causing this to happen and a solution. I will just post what I posted at the KernelEx message board ... it goes into detail about something changing my Control/Alt + Delete window from English to another language ... perhaps German or I almost think it looks Swedish. The Dell computer was OK in early September since I did a Ghost backup at that time and the Control/Alt + Delete box is in English, after I reinstalled the backup ... I had the older KernelEx Final installed at that time. I still have to check my other computers to see what they look like. Anybody else have a Control/Alt + Delete box in a different language that should be English? ... thanks ---------------------------------- I have come across something that may have nothing to do with the new KernelEx 4.5 RC 4 version but I am posting here to see if this has happened to anyone else or if someone can shed some light on this. I have been using the new KEx 4.5 RC 4 for about 3 weeks now ... yesterday I noticed something very strange on one of my notebook computers ... I have 4 notebooks pretty much all set up the same with Windows 98SE. Last night on my Dell Latitude I went to press Control/Alt + Delete and all the wording was no longer in English ... it could be German or maybe Swedish. Everything in the box has changed but the programs to shut down are still in English and everything else on my computer is still English, I have found nothing else on my Dell computer that has changed from English. I have a Ghost backup made in early Sept of all 4 notebooks so I reinstalled the Dell backup and when I checked the Control/Alt + Delete box, everything was in English. I did a few updates from the Sept backup and everything was still English ... Then I took off the KEx Final 2 version that I now had on the Dell from the backup and installed the new KEx 4.5 RC 4. Unfortunately, I didn't check the Control/Alt + Delete right after that ... maybe 10 minutes later after maybe another update or two ... anyway, when I did check the Con/Alt + Delete area again the language had changed from English to the other language. As I said earlier, all my computers are pretty much set up the same so this morning I am on my NEC as I type this message. All my computers have the new KEx 4.5 RC 4 installed ... so when I went to check the Con/Alt + Delete on this computer ... it is OK, everything is in English as it should be. I didn't have time to check the other two computers. So now I am puzzled why English in just that one area got changed to another language and why only on the Dell computer and not the NEC. The Dell Ghost backup from Sept is OK but something changed it after I did the updates ... but I have the same updates on the NEC and nothing has changed. As I said earlier, this may not be related to KernelEx at all since it has only happened to the one computer. Any help or thoughts would be greatly appreciated. Thanks ...

I have come across something that may have nothing to do with the new KernelEx 4.5 RC 4 version but I am posting here to see if this has happened to anyone else or if someone can shed some light on this. I have been using the new KEx 4.5 RC 4 for about 3 weeks now ... yesterday I noticed something very strange on one of my notebook computers ... I have 4 notebooks pretty much all set up the same with Windows 98SE. Last night on my Dell Latitude I went to press Control/Alt + Delete and all the wording was no longer in English ... it could be German or maybe Swedish. Everything in the box has changed but the programs to shut down are still in English and everything else on my computer is still English, I have found nothing else on my Dell computer that has changed from English. I have a Ghost backup made in early Sept of all 4 notebooks so I reinstalled the Dell backup and when I checked the Control/Alt + Delete box, everything was in English. I did a few updates from the Sept backup and everything was still English ... Then I took off the KEx Final 2 version that I now had on the Dell from the backup and installed the new KEx 4.5 RC 4. Unfortunately, I didn't check the Control/Alt + Delete right after that ... maybe 10 minutes later after maybe another update or two ... anyway, when I did check the Con/Alt + Delete area again the language had changed from English to the other language. As I said earlier, all my computers are pretty much set up the same so this morning I am on my NEC as I type this message. All my computers have the new KEx 4.5 RC 4 installed ... so when I went to check the Con/Alt + Delete on this computer ... it is OK, everything is in English as it should be. I didn't have time to check the other two computers. So now I am puzzled why English in just that one area got changed to another language and why only on the Dell computer and not the NEC. The Dell Ghost backup from Sept is OK but something changed it after I did the updates ... but I have the same updates on the NEC and nothing has changed. As I said earlier, this may not be related to KernelEx at all since it has only happened to the one computer. Any help or thoughts would be greatly appreciated. Thanks ...

Well I would say to try XMPlay 3.5.1 ... and put earphones on. I think it delivers the best sound out there. I haven't tried every player but the sound from XMPlay is really good ... with the custom equalizer and the plugins ... very simple to set up. I also recommend K-Meleon 1.5.4 for Win 98SE ... very fast but with KernelEx (latest version) I was able to get the new K-Meleon 1.6 to run on Win 98SE. It's not supposed to run on 98SE. I had help from siria and others at the K-Meleon forum and I also posted a message here relating my experience and links to the K-Meleon site. HTH ... My K-Meleon 1.6 posting: http://www.msfn.org/board/forum/8-windows-959898seme/

North of Watford ... I didn't have much luck with the FreeCommander 2009 version ... went back to the 2008 version. It seem to freeze up on my computer and I had to reboot. I didn't try anything with KernelEx, just decided to go back to FreeCommander 2008, it worked OK on my 98SE notebooks. I didn't do anything yet with the FTP drive. I will check out Q-Dir, never heard of it. thanks. ... maybe someone else will be of more help.

MDGx ... as usual, thanks for the info and links. I thought I had the last FreeCommander version for Win 98SE (2008) but I see you have a version 2009.o2a ... also found a few other Windows Explorer replacements to try. Don't know how you do it and still have a life ... you are the best. May you live forever in good health.

I posted a little about using the K-Meleon browser yesterday under another thread "Last Versions of Software for Windows 98SE". I decided to mention this browser here since some people, including myself, are having luck using Windows 98SE with the newer K-Meleon v1.6 preBeta browser. I will just repost what I wrote yesterday. All the links are there and maybe some will want to try this browser out, might meet all your needs since it is so easy to make it the way you want. They have an Extensions Manager for both NT and Windows 9x that makes it so easy to add Spell Checker and other plugins. The current version 1.5.4 is a very good browser and the newer one will probably be better and faster when completed ... as I mentioned yesterday, the newer version wasn't supposed to work with Win 98SE but with the newer KernelEx versions, that doesn't seem to be the case. It is still in development but it is looking good so far. --------------------------------------------- Posted Yesterday, 11:16 AM Why don't you give K-Meleon a shot. I went to this browser last Oct and haven't been sorry. It is said by many to be the fastest browser on the internet, not sure about that, but it's up there (Google: K-Meleon fastest browser). Good active friendly forum for help and you can customize K-Meleon to what you like ... the Klassic skin will make it look a little like IE6 ... or not ... there are several skins in the download and more that others have made. The current version is 1.54 ... they are working on a newer version 1.6 (BETA Stage) ... it works with the new Gekco engine v1.9 I think ... not suppose to work with Windows 98SE but with the new KernelEx (and help from the forum) I was able to get the new browser working with Win 98SE just over a week ago ... this is all good for us Win 98SE holdouts. Go into the General forum and you will see a question posted about getting Win 98SE to work with the new K-Meleon browser currently in development. Nothing wrong with the current version 1.5.4 ... super fast and look at all the plugins you can add ... it will take some time to read and get things figured out ... settings and all, but not too much time ... I got my v1.5.4 running perfect now and almost 100% with the new 1.6 Beta. I am very satisfied with this browser and the ability to make it exactly like I want it. http://kmeleon.sourceforge.net/ Forums .... http://kmeleon.sourceforge.net/forum/ ----------------------------------------------

Why don't you give K-Meleon a shot. I went to this browser last Oct and haven't been sorry. It is said by many to be the fastest browser on the internet, not sure about that, but it's up there (Google: K-Meleon fastest browser). Good active friendly forum for help and you can customize K-Meleon to what you like ... the Klassic skin will make it look a little like IE6 ... or not ... there are several skins in the download and more that others have made. The current version is 1.54 ... they are working on a newer version 1.6 (preBETA Stage) ... it works with the new Gekco engine v1.9 I think ... not suppose to work with Windows 98SE but with the new KernelEx (and help from the forum) I was able to get the new browser working with Win 98SE just over a week ago ... this is all good for us Win 98SE holdouts. Go into the General forum and you will see a question posted about getting Win 98SE to work with the new K-Meleon browser currently in development. Nothing wrong with the current version 1.5.4 ... super fast and look at all the Extensions that you can add ... it will take some time to read and get things figured out ... settings and all, but not too much time ... I got my v1.5.4 running perfect now and almost 100% with the new 1.6 preBeta. I am very satisfied with this browser and the ability to make it exactly like I want it. http://kmeleon.sourceforge.net/ Forums .... http://kmeleon.sourceforge.net/forum/ ...

I have run into a small problem with this new version that was not occurring before. I use XMPlay v3.5.1 on my Win 98SE notebooks. This has happen on three notebooks when I have installed KEx v4.5 RC 4. I use the WAModern skin (does not happen with the "default" skin) and after installing the new version of KernelEx, when I open XMPlay a Font warning box pops up first saying: Font warning: This skin uses font(s) that you do not have installed, so it will probably not look correct. ZADO (replaced with TAHOMA) TRANSISTOR (replaced with TAHOMA) PIX4 (replaced with SMALL FONTS) PROFONTWINDOWS (replaced with MS Cerf) ----------------------------------------------------- After I hit "OK" ... XMPlay will open and play OK. I found 3 of those "missing fonts" online for free downloads but cannot find the "PIX4" font anywhere. Now the Font warning box only pops up for that PIX4 font when I open XMPlay. ... I have had other versions of KernelEx installed with XMPlay with this WAModern skin and the Font warning box has never popped up till now. This may not be any fault with KernelEx, I don't know ... I have sent an e-mail to the WAModern skin developer ... Keltic Danor ... at XMPlay support but have had no reply to date. If someone here by chance knows him maybe you could give him a heads up on all this. ... Well, the font problem has been solved ... XMPlay support said the Fonts are in the WAModern source files at the XMPlay web site. I never thought about checking for source files ... so nothing wrong with KernelEx, just that this change happened with the newer version of KernelEx.

OK Xeno86 ... all worked and I was finally able to install KernelEx 4.5 RC 1. Thanks so much for the assist ... I see the kernel32.bak file, in the KernelEx folder, that was missing before. I made an extra copy and will save it on a CD for the future in case. I know now what happened ... I have a hard drive cleaning tool that cleans out junk files, including "bak" files. I have put that Kernel32.bak file on the Protect List. Thanks again for your help.

Thanks Xeno86 for the reply. Going to do everything right now.

... I don't why this didn't stay in the KernelEx 4.5 RC 1 message thread. I was there reading and wrote this message there. Can someone please move it to the KernelEx thread. I have had KernelEx 4.0 Final 2 installed on my notebook with Win 98SE with no problems. Yesterday I decided to try KernelEx 4.5 RC 1 ... wasn't sure if I had to uninstall the older version first (4.0 Final 2) but I did uninstall it and when I went to install 4.5 RC 1 I got this error message. ------------------------------------- Error: Failed to open backup file C:\windows\kernelex\kernel32.bak Possible causes: Previous version not uninstalled correctly or file has been deleted. Restore C:\windows\system\kernelex32.dll manually from install media ------------------------------------- I did a check in "Find Files or Folders" and kernelex.dll was in the system folder. I reinstalled ver 4.0 Final 2 with no problem. I then tried to install ver 4.5 RC 1 again over ver 4.0 Final 2 and got the same above error message. Can someone explain what it means and how to install ver 4.5 RC 1. thanks ...

supem ... thanks for the v2.82 info and download. There was no info on the other post about what version of KillCopy they were talking about so I downloaded what the link took me to (v2.85) ... found out it didn't work. It said I needed ver 2.82 for Win 98SE. I wasn't able to find v2.82 anywhere when I hunted for it on Google. Thanks again. ... just finished installing KillCopy and trying it out. Very nice program ... it'll work for me. Pretty darn fast but I didn't have any really large files to play around with. I also like the fact that it doesn't seem to use any resources when it is idle ... when I check Memload, nothing shows so it must only use resources when it is actually running and nothing when it is just waiting around for something to do ... thanks again.

... just curious what version you are using or talking about. The version at the top of that page no longer supports Win 98SE. ---------------------------------------------------- SuperCopier 2.2 Beta Sun, 08/16/2009 Changelog: * Complete rewrite of the copy interception system, adds support for Windows Vista, Seven and all 64 bit Windows. For now, compatibility with Windows 95, 98 and Millenium has been dropped and 'handled processes' is deactivated. ...

After reading your post I decided I had better get a few extra spare mice for my Win 98SE notebooks. I found this very cheap USB Optical 3 Button wired mouse at Amazon. It is only $4.99 with free shipping included. It has a long cord to reach from the right side of your computer to the left side, as is the case for where my USB port is. Some of the reviews are negative, mostly people dropping the little critter ... but there are positive reviews also. I just got mine today and am using it now. Very satisfied for a spare and may use it everyday. I can see it breaking if dropped on a hard floor from some height. It is listed on the box to work with Win 98/2000/Me/NT/XP/Vista/Win7 ... I may get a couple extra at this price but so far it works very good. Had to slow it down a little in the Control Panel/Mouse folder. Of course, maybe it will only work for a week or two but I will use it heavy everyday next week. Black 3-Button 3D USB 800 Dpi Optical Scroll Mice Mouse w/Blue & Red LEDs For Notebook Laptop Desktop http://www.amazon.com/3-Button-Optical-Scroll-Notebook-Desktop/dp/B0037FS8WM/ref=sr_1_16?ie=UTF8&s=electronics&qid=1284215379&sr=8-16 There was also another USB Optical wired mouse that I also ordered, had to pay shipping but many people said good things about it. Decided to get that one also. However, when I ordered from just a few days ago the price was $3.99 + $3.99 shipping ... today the price is $9.35 + shipping (unless you get 3 for free shipping) ... pretty big price jump from Sept 8th. I am thinking it is very popular with more people ordering the thing with the good reviews. However, anyone that does buy from Amazon knows that the prices change constantly. It could drop back to the old price next week or tomorrow. Inland USB Optical Mouse (Black) http://www.amazon.com/gp/product/B001AZT5JG/ref=ox_ya_os_product Hope this might be of some help ... *** Just noticed that someone is selling that $4.99 USB mouse for $3.99 with free shipping. Reviews were good about shipper and the item. Look under the $4.99 price and you should see a price of $.01 New. Prices all over the place but there is a $4.99 and then the $3.99 price. They are the cheapest compared with the others. Recent Feedback: 5 out of 5: "this mouse is great! not only is it lightweight, but it's colorful! i get lots of compliments all the time!" Date: September 10, 2010 Rated by Buyer: Carlos J. http://www.amazon.com/gp/offer-listing/B0037FS8WM/ref=dp_olp_new?ie=UTF8&qid=1284221198&sr=8-16&condition=new ... Just wanted to add one last post about that $4.99 USB Optical mouse. I see Amazon has switched companies around on the link I posted earlier. The new company is still selling the mouse for $4.99 but also with a shipping charge now. If you look a little further down the page you will see a few other companies listed ... WOWparts is the company that was listed here last week. Their price is now $5.99 but still with free shipping and I see the one seller is still selling a $3.99 mouse with free shipping. That's the thing with Amazon, prices are always changing and the sellers also. Maybe no one is really interested but I thought I should clear a few things up. ... This is my last post (09-14) on this $4.99 USB Mouse ... I see Amazon has WOWparts as the main dealer again at the $4.99 price with free shipping. It's unreal how the prices and sellers change at Amazon every day or two.