Bilou_Gateux

Here correct data to use for some values: http://social.msdn.microsoft.com/forums/en-US/21904ab0-9efc-45c7-b49b-c0df0656579c/how-to-change-the-protected-partition-with-ewfram-mode- I can confirm with my SCT install: enabled EWF Disk Mode protects Disk0 Part1 with an overlay size of 8 Gb (8 x 1000 x 1024) decimal 8192000, in hex notation 0x007d0000: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ewf [30 31 1 17] Group = System Bus Extender Start = REG_DWORD 0x00000000 ErrorControl = REG_DWORD 0x00000001 Type = REG_DWORD 0x00000001 FBA [30 31 1 17] PVConfigs = REG_DWORD 0x00000001 OVSize = REG_DWORD 0x007d0000 OVLevel = REG_DWORD 0x00000001 EnableLazyWrite = REG_MULTI_SZ "1" PVPart = REG_MULTI_SZ "1" PVType = REG_MULTI_SZ "0" PVDiskType = REG_MULTI_SZ "0" PVOptimize = REG_MULTI_SZ "0" EwfEnable = REG_MULTI_SZ "1" PVDisk = REG_MULTI_SZ "0"

Microsoft Shared Computer Toolkit for Windows XP, the predecessor to Windows SteadyState was "free". This application [sCT] has been discontinued. From the FAQ http://www.microsoft.com/windowsxp/sharedaccess/faq.mspx During initial installation, EWF [2.0.927] is configured but not enabled (done after reboot when setting Disk Protection) reg dump: HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\ewf [1 31 17 30] ErrorControl = REG_DWORD 0x00000001 Group = System Bus Extender Start = REG_DWORD 0x00000000 Type = REG_DWORD 0x00000001 Tag = REG_DWORD 0x00000010 FBA PVConfigs = REG_DWORD 0x00000001 OVSize = REG_DWORD 0x00000000 OVLevel = REG_DWORD 0x00000001 EnableLazyWrite = REG_MULTI_SZ "1" PVPart = REG_MULTI_SZ "1" PVType = REG_MULTI_SZ "0" PVDiskType = REG_MULTI_SZ "0" PVOptimize = REG_MULTI_SZ "0" EwfEnable = REG_MULTI_SZ "0" PVDisk = REG_MULTI_SZ "0"

for localized versions of Office 2003, integrate office2003-KB943452-FullFile-xxx.exe. contains FORMMAN20ENU.msp patch which solves issue with FM20ENU.DLL

Create LIS (Local Installation Source) to default path %SystemDrive%\MSOCache from Office 2003 slipstreamed with SP3 : SET SOURCE_PATH=<replace_with_source_path_here> %source_path%\setup.exe CDCACHE=2 DELETEABLECACHE=0 PURGE=0 CACHEONLY=1 Office 2003 setup.exe (enhanced version) version 11.0.6176.0 Source is built with: [OfficeIntegrator] Website=http://www.siginetsoftware.com/forum/ OIVersion=1.1.0.20 Method=Direct Integration Service Pack=Service Pack 3 (SP3) KB923618=Office 2003 Service Pack 3 (SP3) Note: for localized versions of Office 2003, office2003-KB943452-FullFile-xxx.exe had to be integrated to avoid issues: http://www.msfn.org/board/topic/104819-office-2003-slipstream-with-sp3-problem/

FP_AX_CAB_INSTALLER.exe -install

Can someone re-upload 7zipsplit.exe? Mediafire: Invalid or deleted file

Microsoft LifeCam 3.x Microsoft-LifeCam-Webcam-Drivers-Only I have found that you can download two small cab packages: http://download.microsoft.com/download/C/B/8/CB8414CD-487E-4E18-8B24-DA8ED722C770/ReleaseCatalogMsi.cab http://download.microsoft.com/download/C/B/8/CB8414CD-487E-4E18-8B24-DA8ED722C770/ReleaseCatalogSetup.cab and find the URL for your language and OS inside the xml files included in cab files. but i haven't found the silent switches (if any) for setupstb.exe

Thanks for the clarification. Is there any practical use for smallest release?

How do i mount this file as virtual disk? With the initial release, i can mount boot.sdi with imdisk: imdisk -a -t vm -f boot.sdi -b 8192 -m C:\Dev\boot Now your archive contains both 300.part file and boot.sdi I tried mounting boot.sdi but can't find NTFS bootrecord which starts with EB5290

Could you upload the small compiled ql.exe to free file host service.