bb100 Posted June 17, 2007 Share Posted June 17, 2007 I created an iso using dell SP1 Home XP, nlite 1.4 beta, and ryanvm update pack. All goes well until the last 9 minutes of the intsall with VPC 2007, which hangs on saving settings? Link to comment Share on other sites More sharing options...
AlaskaMJB Posted June 26, 2007 Share Posted June 26, 2007 Same problem. Using WinXPPro SP2 with nlite 1.3 rc2 and RVM Update 2.1.10 was no problem except for File protection pop-ups. Thought I'd try nlite 1.4 beta and install hangs on saving setting with 9 minutes to go. The only thing I'm removing with nlite is languages and keyboards while installing drivers I've used many times before. Home build system Mach Speed MB, AMD Athalon XP 2500, 1 gig Ram, 160 gig HD, Netcell Raid PCI. Link to comment Share on other sites More sharing options...
LuminaryJanitor Posted June 27, 2007 Share Posted June 27, 2007 (edited) Same problem here. XP Pro, SP2, Xable's update, DX9c addon. Narrowed it down to something removed in the OS options or network sections, or perhaps WMP (gave up once I found out it works fine in 1.3).BTW, the first time I encountered this, it installed in VirtualPC - though "Saving Settings" took about 20 minutes - but sat there forever when I tried to install it for real... Edited June 27, 2007 by LuminaryJanitor Link to comment Share on other sites More sharing options...
brosenz Posted June 27, 2007 Share Posted June 27, 2007 Same problem here. XP Pro, SP2, Xable's update, DX9c addon. Narrowed it down to something removed in the OS options or network sections, or perhaps WMP (gave up once I found out it works fine in 1.3).BTW, the first time I encountered this, it installed in VirtualPC - though "Saving Settings" took about 20 minutes - but sat there forever when I tried to install it for real...Hi, I am having the same problem with 1.4, did you use 1.3.5 or 1.3.0 ?, thanks Link to comment Share on other sites More sharing options...
Duski Posted June 27, 2007 Share Posted June 27, 2007 Hello, had to register to post this.I had same problem as you, after a bit searching I found out some guy who said removing cd from drive when installation is "saving settings" (actually I removed it sometimes after or during device installation, since it was no more needed) had helped him to get through that part. Of course I was sceptical but it was so easy to try it, and what do you know it went through it after all! I can only guess if it has some relation to interrupts or something but it worked for me.Great software, sadly I could not squeeze out more performance with it though (at least not yet). Link to comment Share on other sites More sharing options...
LuminaryJanitor Posted June 28, 2007 Share Posted June 28, 2007 ...did you use 1.3.5 or 1.3.0 ?1.3.5.I cleaned out everything I wanted to with 1.3.5, then used 1.4 for the handful of new removal options, and it installed fine, so it looks like it's one of the old options messing up the 1.4 install. Link to comment Share on other sites More sharing options...
LordNestXP Posted June 28, 2007 Share Posted June 28, 2007 [quote name='I cleaned out everything I wanted to with 1.3.5, then used 1.4 for the handful of new removal options, and it installed fine, so it looks like it's one of the old options messing up the 1.4 install.Can you be more specific please.which version u used to slipstream the hotfixes the 1.3.5 or 1.4?i have to used the 1.4 only for removal or 1.3.5?and the full process (tweaks, unnattendend, integration and options) , will be in hands of 1.35 or 1.4thanks in advance Link to comment Share on other sites More sharing options...
dubsdj Posted June 28, 2007 Share Posted June 28, 2007 Is there a switch you can use when you run the setup.exe file. I think there might be a recovery mode setup or something... I'm sure i had a similar problem once.. Link to comment Share on other sites More sharing options...
acdc6275 Posted August 5, 2007 Share Posted August 5, 2007 (edited) disable sfc during setup. double check your language and keyboard settings you chose in nlite. Edited August 5, 2007 by acdc6275 Link to comment Share on other sites More sharing options...
Oleg_II Posted August 6, 2007 Share Posted August 6, 2007 disable sfc during setup. double check your language and keyboard settings you chose in nlite.Or copy patched SYSSETUP.DL_ somewhere else, rename to SYSSETBCK.DL_ and replace the file in i386 (I don't remember the exact file name, take a look in i386 folder and you will find something like this). This will also disable sfc. Link to comment Share on other sites More sharing options...
nflesher87 Posted August 6, 2007 Share Posted August 6, 2007 disable sfc during setup. double check your language and keyboard settings you chose in nlite.I've been having the same problem, would you mind being a little more specific about how to disable sfc? and maybe what sfc is lolthanks! Link to comment Share on other sites More sharing options...
Legolash2o Posted August 6, 2007 Share Posted August 6, 2007 SFC is on the tweaks page where you select if you want to enabled unsigned themes, Mouse Polling settings.SFC stands for System File Check (correct me if im wrong) and it just checks to make sure you havent deleted/modified any important files and if you do then it replaces it with a backup Link to comment Share on other sites More sharing options...
newsposter Posted August 7, 2007 Share Posted August 7, 2007 Ok, how about turning OFF SFC during installation and then back on after first boot? Link to comment Share on other sites More sharing options...
Legolash2o Posted August 7, 2007 Share Posted August 7, 2007 ermmm. its a hard task but im sure theres a topic on here about it Link to comment Share on other sites More sharing options...
Oleg_II Posted August 8, 2007 Share Posted August 8, 2007 Ok, how about turning OFF SFC during installation and then back on after first boot?This is just like nLite is doing when you don't choose SFC disabling on the tweaks page During installation nLite uses patched SYSSETUP.DLL, and by the end of installation it is replaced by original file.But there is probably some bug with SFC here that is why disabling SFC permanently was recommended in this case Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now