m16si Posted October 3, 2006 Posted October 3, 2006 I have Logitech MX500 mouse and i have problems with it.When i play games or in windows (XPsp2) the mouse suddenly disconnects for a few seconds, than it connects back.It has an USB interface.Can it be that cable's connection is bad ?If there is i will change my cable to PS2 cable.. But i don't know where to get it.....I don't want to buy new mouse because this one is good and it only disconnects....Please Help !m16si
ripken204 Posted October 3, 2006 Posted October 3, 2006 if ur plugged into usb right now then possibly... try plugging it into another usb port.
puntoMX Posted October 3, 2006 Posted October 3, 2006 And if that doesn´t help, cut your cable on the bad place and connect the wires again.Most of the time the cable will brake at the part were the cable comes out of the mouse.
Johnny Faster Posted October 3, 2006 Posted October 3, 2006 I wouldn't cut what could be a perfectly good cable. there are dozens of other reasons why this mouse could be bad.
puntoMX Posted October 3, 2006 Posted October 3, 2006 Well, it’s easy to test, just play around with the cable and see if it goes off and on... Or stays off... It common that cables break after some time. With Logitech it’s after 2.5 years or so with normal use (my experience, and not just with one).Ow, those mice have 5 year warranty…
dopey1467 Posted October 4, 2006 Posted October 4, 2006 I had the same mouse some time back, mine was supplied with a serial adapter, try using that instead of the USB.
nitroshift Posted October 4, 2006 Posted October 4, 2006 I had the same mouse some time back, mine was supplied with a serial adapter, try using that instead of the USB.That would rule out the USB ports being faulty.
m16si Posted October 4, 2006 Author Posted October 4, 2006 I have found the error its in the cable.When i move the cable which comes out of the mouse it disconnects the mouse.But how can i get new cable ?Will it be allright if i use PS2 interface instead of USB. I talked with my friend in school today and he said if i change the cable to PS2 mouse will not support all 8 buttons is this true ?Thnx
nitroshift Posted October 4, 2006 Posted October 4, 2006 I have found the error its in the cable.When i move the cable which comes out of the mouse it disconnects the mouse.But how can i get new cable ?Will it be allright if i use PS2 interface instead of USB. I talked with my friend in school today and he said if i change the cable to PS2 mouse will not support all 8 buttons is this true ?ThnxIf its meant to be a USB mouse, then leave it that way. If it isn't covered by warranty any longer, carefully remove all the screws, make a note of how the wires inside the cable are soldered to the board, then cut the cable ~2 cm away from the faulty point and solder back the wires to the board of the mouse. Cheers and good luck!
m16si Posted October 4, 2006 Author Posted October 4, 2006 It works !!!!!I changed the cable with cable from my old PS2 mouse and it works with PS2 interface with all buttons.So thanx for tips !!!M16si
nitroshift Posted October 4, 2006 Posted October 4, 2006 You're welcome. Glad you fixed it and it works as a standard PS/2 mouse.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now