January 12, 200620 yr I made a custom sp2 disk with v1.31 of RyanVM as v2 was giving me problems. After restarting, (I changed it to the old setup look) it goes to Installing Devices, where it says the screen may flicker etc. Anyways, when the screen would normally flicker, it just goes black. I left it over night and it stayed black. If I restart, repartition from the cd, and redo the install, same thing. Whats going on?
January 12, 200620 yr Can you tell if the installation continues on? Is there hard drive or CD/DVD drive activity?
January 13, 200620 yr I've experienced a similar problem.In my case it was because the screen (TFT) on my laptop couldn't handle refresh rates higher than 60 Hz, do you use a flat screen?My guess is that it is driver related (if you added any drivers to the cd) or has something to do with RyanVM:s pack. Try remaking the cd without his pack or other add-ons.
January 13, 200620 yr pIII has nothing to do with it, i have it installed on my dad's pII and it runs amazing for a 350mhz cpu. try to integrate the right drivers into you xpcd.
January 13, 200620 yr i install xp sp2 on my od NB which is P II 366 192 RAM blue screen sometimes stands for hardware conflict.maybe u can uninstall ur RAM clean it ,and reinstall.good luck
January 13, 200620 yr Author Can you tell if the installation continues on? Is there hard drive or CD/DVD drive activity?No hard drive or CD activity, it just sits there.Videocard problems maybe?The video card is a working pull from another machine, so I know it works perfectlyMaybe your computer can't handle windows xp. What are your system specs?PIII Socket 1, 288MB RAM, 10GB Seagate, 8GB Maxtor, Nvidia Geforce4 MX440I've experienced a similar problem.In my case it was because the screen (TFT) on my laptop couldn't handle refresh rates higher than 60 Hz, do you use a flat screen?My guess is that it is driver related (if you added any drivers to the cd) or has something to do with RyanVM:s pack. Try remaking the cd without his pack or other add-ons.It was on a normal monitor. Ill try rebuilding it from a clean XP install (no service packs, build 0)pIII has nothing to do with it, i have it installed on my dad's pII and it runs amazing for a 350mhz cpu. try to integrate the right drivers into you xpcd.Ill give that a shot aswelli install xp sp2 on my od NB which is P II 366 192 RAM blue screen sometimes stands for hardware conflict.maybe u can uninstall ur RAM clean it ,and reinstall.good luckNever bluescreened though. RAM is fine as far as I know, but Ill keep ya updated. Thanks to everyone that replied!
January 13, 200620 yr It was on a normal monitor. Ill try rebuilding it from a clean XP install (no service packs, build 0)build 0?wow...I didn't think that people could get ahold of a 0 build.. but then again my 2k cd is build 1
January 13, 200620 yr How long have you run the machine with XP? Is this your initial upgrade from 9x OS? Have you kept original hardware during the transition? Perhaps you should adding drivers (processor or hal), or checking their sequence of installation.
January 13, 200620 yr Author build 0?wow...I didn't think that people could get ahold of a 0 build.. but then again my 2k cd is build 1 Well its a Corp. Edition, maybe thats why? Whenever I load it in nLite it shows up as Windows XP Professional (Build 0). Go figureHow long have you run the machine with XP? Is this your initial upgrade from 9x OS? Have you kept original hardware during the transition? Perhaps you should adding drivers (processor or hal), or checking their sequence of installation.Machine has never had XP on it. Or anything for that matter. I just pulled some parts off a shelf and put it together. I actually had to do a BIOS update because it was too old to boot from cd, and the Floppy controller has gone to hell (Used a flash burner and pulled the chip to do it) I added the video card drivers to it, and lo and behold, it worked. Thanks to everyone who helped Now, back to installing six sound cards into it Edited January 13, 200620 yr by SpikedCola
January 16, 200620 yr Alright, now that we got to the happy ending, I guess it's time for me to take the bait...Why so many sound cards?
Create an account or sign in to comment