VIA shuttle spacewalker 8605-686A

is that what is listed under model on the mainboard icon in sandra?

i tried googling it, came up with nothing. also tried shuttles site and couldnt find anything on thier site about it either....

SiSoftware Sandra

System

Manufacturer : VIA Technologies, Inc.

Model : VT8605

ID : FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF

Mainboard

Manufacturer : Shuttle Inc.

MP Support : No

Model : 8605-686A

System BIOS : 12/21/2000-8605-686A-6A6LLH29C-00

Chipset : VIA VT8605 ProSavage PM133

FLASH Memory Controller

Location : Mainboard

Error Correction Capability : None

Number of Memory Slots : 3

Maximum Installable Memory : 512MB

Bank0/1 - BANK_0 : DIMM 256MB

Bank2/3 - BANK_1 : Empty

Bank4/5 - BANK_2 : Empty

Chipset

Model : VIA Technologies Inc VT8605 ProSavage PM133 System Controller

Bus(es) : ISA AGP PCI USB i2c/SMBus

Front Side Bus Speed : 1x 100MHz (100MHz data rate)

Maximum FSB Speed / Max Memory Speed : 1x 133MHz / 1x 133MHz

IO Queue Depth : 4 request(s)

Logical/Chipset Memory Banks

Bank 0 : 128MB SDRAM 7-1-1-1R 4-1-1-1W 3-3-3CL

Bank 1 : 128MB SDRAM 7-1-1-1R 4-1-1-1W 3-3-3CL

Speed : 1x 100MHz (100MHz data rate)

Multiplier : 1/1x

Power Save Mode : No

Fixed Hole Present : No

Memory Module(s)

Memory Module 1 : MS3856UHY-T68A3 256MB 16x(16Mx8) SDRAM PC133U-333-542 (CL3 upto 133MHz)

Environment Monitor 1

Model : VIA 686PM ISA

Version : 10.02

Mainboard Specific Support : Yes

Temperature Sensor(s)

Board Temperature : 21.5°C / 70.7°F

CPU Temperature : 26.3°C / 79.3°F

Power / Aux Temperature : 22.4°C / 72.3°F

Cooling Device(s)

Auto Fan Speed Control : No

CPU Fan Speed : 2744rpm

Voltage Sensor(s)

CPU Voltage : 1.82V

+3.3V Voltage : 3.39V

+5V Voltage : 5.10V

+12V Voltage : 12.31V

AGP Bus(es)

Version : 2.00

Speed : 66MHz

Current Data Transfer Rate : 4x 66MHz (264MHz data rate)

Side Band Enabled : No

Side Band Support : Yes

Fast-Writes Enabled : No

Aperture Size : 128MB

PCI Bus(es)

Version : 2.10

Number of Bridges : 1

PCI Bus 0 : PCI (33MHz)

Multiplier : 1/3x

LPC Hub Controller 1

Model : VIA Technologies Inc VT82C686/A PCI to ISA Bridge

ACPI Power Management Enabled : Yes

Random Number Generator Enabled : No

Multiplier : 1/4x

Speed : 8MHz

DMA Multiplier : 1/2x

DMA Speed : 4MHz

USB Controller 1

Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)

Version : 1.10

UHCI Interface : Yes

Channels : 2

Speed : 48MHz

Legacy Emulation Enabled : No

USB Controller 2

Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)

Version : 1.10

UHCI Interface : Yes

Channels : 2

Speed : 48MHz

Legacy Emulation Enabled : No

System SMBus Controller 1

Model : Intel PIIX4 SMBus / compatible

Version : 4.00

Speed : 16kHz

Expansion Slot(s)

ISA : ISA 16-bit +5V FullLength

ISA : ISA 16-bit +5V FullLength

ISA : ISA 16-bit +5V FullLength

ISA : ISA 16-bit +5V FullLength

PCI (Ah) : PCI 32-bit +5V FullLength InUse (Lucent/Agere Systems (Was: AT&T MicroElectronics) LT WinModem 56k Data+Fax+Voice+Dsvd)

PCI (Fh) : PCI 32-bit +5V FullLength Available

PCI (Eh) : PCI 32-bit +5V FullLength Available

PCI (Bh) : PCI 32-bit +5V FullLength Available

AGP (8h) : AGP 32-bit +5V FullLength InUse (Nvidia Corp GeForce4 Ti 4200 with AGP 8X [NV28.2])

Port Connector

PRIMARY IDE : None - ATA / None

SECONDARY IDE : None - ATA / None

FDD : 8251 FIFO - Floppy Disk / None

COM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male

COM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin male

LPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin female

Keyboard : Keyboard - None / PS/2

PS/2 Mouse - Detected : Mouse - PS/2 / PS/2

USB : USB - None / None

this help ya?

533 here

could get more, but im happy w/what i have

He must mean 533 MHz in total, not 533 MHz per bus.

i have a p4 1.5@1.9Ghz, my fsb is @ 127Mhz and my pc133 mems at 169Mhz it runs very smooth