Porn Loader Posted May 26, 2003 Author Share Posted May 26, 2003 VIA shuttle spacewalker 8605-686Ais that what is listed under model on the mainboard icon in sandra?i tried googling it, came up with nothing. also tried shuttles site and couldnt find anything on thier site about it either.... Link to comment Share on other sites More sharing options...
Doggie Posted May 27, 2003 Share Posted May 27, 2003 SiSoftware SandraSystemManufacturer : VIA Technologies, Inc.Model : VT8605ID : FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFFMainboardManufacturer : Shuttle Inc.MP Support : NoModel : 8605-686ASystem BIOS : 12/21/2000-8605-686A-6A6LLH29C-00Chipset : VIA VT8605 ProSavage PM133FLASH Memory ControllerLocation : MainboardError Correction Capability : NoneNumber of Memory Slots : 3Maximum Installable Memory : 512MBBank0/1 - BANK_0 : DIMM 256MBBank2/3 - BANK_1 : EmptyBank4/5 - BANK_2 : EmptyChipsetModel : VIA Technologies Inc VT8605 ProSavage PM133 System ControllerBus(es) : ISA AGP PCI USB i2c/SMBusFront Side Bus Speed : 1x 100MHz (100MHz data rate)Maximum FSB Speed / Max Memory Speed : 1x 133MHz / 1x 133MHzIO Queue Depth : 4 request(s)Logical/Chipset Memory BanksBank 0 : 128MB SDRAM 7-1-1-1R 4-1-1-1W 3-3-3CLBank 1 : 128MB SDRAM 7-1-1-1R 4-1-1-1W 3-3-3CLSpeed : 1x 100MHz (100MHz data rate)Multiplier : 1/1xPower Save Mode : NoFixed Hole Present : NoMemory Module(s)Memory Module 1 : MS3856UHY-T68A3 256MB 16x(16Mx8) SDRAM PC133U-333-542 (CL3 upto 133MHz)Environment Monitor 1Model : VIA 686PM ISAVersion : 10.02Mainboard Specific Support : YesTemperature Sensor(s)Board Temperature : 21.5°C / 70.7°FCPU Temperature : 26.3°C / 79.3°FPower / Aux Temperature : 22.4°C / 72.3°FCooling Device(s)Auto Fan Speed Control : NoCPU Fan Speed : 2744rpmVoltage Sensor(s)CPU Voltage : 1.82V+3.3V Voltage : 3.39V+5V Voltage : 5.10V+12V Voltage : 12.31VAGP Bus(es)Version : 2.00Speed : 66MHzCurrent Data Transfer Rate : 4x 66MHz (264MHz data rate)Side Band Enabled : NoSide Band Support : YesFast-Writes Enabled : NoAperture Size : 128MBPCI Bus(es)Version : 2.10Number of Bridges : 1PCI Bus 0 : PCI (33MHz)Multiplier : 1/3xLPC Hub Controller 1Model : VIA Technologies Inc VT82C686/A PCI to ISA BridgeACPI Power Management Enabled : YesRandom Number Generator Enabled : NoMultiplier : 1/4xSpeed : 8MHzDMA Multiplier : 1/2xDMA Speed : 4MHzUSB Controller 1Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)Version : 1.10UHCI Interface : YesChannels : 2Speed : 48MHzLegacy Emulation Enabled : NoUSB Controller 2Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)Version : 1.10UHCI Interface : YesChannels : 2Speed : 48MHzLegacy Emulation Enabled : NoSystem SMBus Controller 1Model : Intel PIIX4 SMBus / compatibleVersion : 4.00Speed : 16kHzExpansion Slot(s)ISA : ISA 16-bit +5V FullLengthISA : ISA 16-bit +5V FullLengthISA : ISA 16-bit +5V FullLengthISA : ISA 16-bit +5V FullLengthPCI (Ah) : PCI 32-bit +5V FullLength InUse (Lucent/Agere Systems (Was: AT&T MicroElectronics) LT WinModem 56k Data+Fax+Voice+Dsvd)PCI (Fh) : PCI 32-bit +5V FullLength AvailablePCI (Eh) : PCI 32-bit +5V FullLength AvailablePCI (Bh) : PCI 32-bit +5V FullLength AvailableAGP (8h) : AGP 32-bit +5V FullLength InUse (Nvidia Corp GeForce4 Ti 4200 with AGP 8X [NV28.2])Port ConnectorPRIMARY IDE : None - ATA / NoneSECONDARY IDE : None - ATA / NoneFDD : 8251 FIFO - Floppy Disk / NoneCOM1 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin maleCOM2 : Serial Port 16450 - 9 Pin Dual Inline / DB-9 pin maleLPT1 : Parallel Port ECP/EPP - DB-25 pin female / DB-25 pin femaleKeyboard : Keyboard - None / PS/2PS/2 Mouse - Detected : Mouse - PS/2 / PS/2USB : USB - None / Nonethis help ya? Link to comment Share on other sites More sharing options...
Simo Hayha Posted June 5, 2003 Share Posted June 5, 2003 533 herecould get more, but im happy w/what i haveHe must mean 533 MHz in total, not 533 MHz per bus. Link to comment Share on other sites More sharing options...
malukitojr Posted June 8, 2003 Share Posted June 8, 2003 i have a p4 1.5@1.9Ghz, my fsb is @ 127Mhz and my pc133 mems at 169Mhz it runs very smooth Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now