supem Posted January 31, 2012 Share Posted January 31, 2012 Hi,Take a look back here Link to comment Share on other sites More sharing options...
Drugwash Posted February 1, 2012 Share Posted February 1, 2012 Thanks guys, but as you know, to buy something, one needs money first and then access to the "market"; I have neither, in this country. Some of my hardware is pretty old, most BIOS implementations do not know LBA48 and some of the older ones barely accept 32GB HDDs or even less (such as the 486 which only takes 526MB IDE HDDs).Anyway, this discussion is off-topic, let's not deviate. Thank you for trying to help! Link to comment Share on other sites More sharing options...
jds Posted February 1, 2012 Share Posted February 1, 2012 (edited) Thanks guys, but as you know, to buy something, one needs money first and then access to the "market"; I have neither, in this country. Some of my hardware is pretty old, most BIOS implementations do not know LBA48 and some of the older ones barely accept 32GB HDDs or even less (such as the 486 which only takes 526MB IDE HDDs).Anyway, this discussion is off-topic, let's not deviate. Thank you for trying to help!Yes it is off-topic (my apologies), so I'll make this brief ...Firstly, should you find yourself with about US$3 to spare, at least one of the vendors on eBay offers "Free shipping - Romania - Standard Int'l Shipping" for this item.As regards the BIOS limitations, yes, the 32GB limitation on most (but not all) Award 4.51PG BIOS's is a nasty one. Since the SATA adaptor I have doesn't provide a "32GB clip" option, your solution to using a modern HDD is to configure such a 32G limit using Seagate's "SeaTools for DOS" utility (the Windoze version doesn't give you this capability). Do this on a machine that doesn't have the 32GB bug, then transfer it to the afflicted machine.For the earlier "528MB" limit, you used to be able to download OEM versions of OnTrack's Disk Manager 9.X (or similar alternative DDO's) for free from Seagate, Maxtor, etc. This lets you reach at least 7.8GB (I don't remember if you could go higher). The OnTrack DDO used about 5K of conventional RAM and didn't affect HDD performance.Joe. Edited February 1, 2012 by jds Link to comment Share on other sites More sharing options...
gerislamico Posted February 5, 2012 Share Posted February 5, 2012 (edited) As I can avoid these warning messages when installing the Service Pack To not do so long I leave my post between CODE[img=http://k12.kn3.net/25DEC01D8.png] [img=http://k25.kn3.net/141550364.png] [img=http://k23.kn3.net/360563775.png] [img=http://k15.kn3.net/EF3136551.png][img=http://k07.kn3.net/A9ED7A29F.png] [img=http://k20.kn3.net/1012DB337.png][img=http://k04.kn3.net/EE36F781F.png] [img=http://k24.kn3.net/2F7F6CB4D.png][img=http://k03.kn3.net/1991DBC5C.png] [img=http://k27.kn3.net/B7620287E.png] [img=http://k14.kn3.net/E8324E2B2.png] [img=http://k04.kn3.net/7FA436A77.png]File affectsCOMDLG32.DLL ,,,32GRPCONV.EXE ,,,32MPR.DLL ,,,32MSXMLA.DLL ,,,32MSXMLR.DLL ,,,32MSXML3A.DLL ,,,32MSXML3R.DLL ,,,32PPPMAC.VXD,,1056REGEDIT.EXE ,,,32WLDAP32.DLL,,1056XENROLL.DLL ,,,32Mydocs.dllParcial SolutionMod SPUPDATE.INFCOMDLG32.DLL ,,,4GRPCONV.EXE ,,,4MPR.DLL ,,,4MSXMLA.DLL ,,,4MSXMLR.DLL ,,,4MSXML3A.DLL ,,,4MSXML3R.DLL ,,,4PPPMAC.VXD,,1028REGEDIT.EXE ,,,4WLDAP32.DLL,,1028XENROLL.DLL ,,,4Mod SHELL.INF into Infex directoryMydocs.dll ,,,4Request permission to adapt the Service Pack 3.0 Final to Spanish Check compatibility with USB Drivers. The new USBEHCI.SYS or USBSTOR.SYS failure? Edited February 8, 2012 by gerislamico Link to comment Share on other sites More sharing options...
TmEE Posted February 6, 2012 Share Posted February 6, 2012 I recently lost my 98SE install to a power fluctuation and began experimenting with new stuff and that's some of my experiences, I hope this is of use to someone :I can say that do not install this SP after you have installed and run AutoPatcher. You will break the system so it will not even boot to safe mode. But installing SP3 and then AutoPatcher works out perfectly. AP will skip any update that SP3 put newer version of so there are no problems in sight, not for me ^^Only thing that did not work out so well was NUSB35, I got exclamation mark in device manager and updating etc. did not help, but going to NUSB33 fixed it. I need to see if putting NUSB35 separately helps. Link to comment Share on other sites More sharing options...
gerislamico Posted February 6, 2012 Share Posted February 6, 2012 (edited) I recently lost my 98SE install to a power fluctuation and began experimenting with new stuff and that's some of my experiences, I hope this is of use to someone :I can say that do not install this SP after you have installed and run AutoPatcher. You will break the system so it will not even boot to safe mode. But installing SP3 and then AutoPatcher works out perfectly. AP will skip any update that SP3 put newer version of so there are no problems in sight, not for me ^^Only thing that did not work out so well was NUSB35, I got exclamation mark in device manager and updating etc. did not help, but going to NUSB33 fixed it. I need to see if putting NUSB35 separately helps.http://exuberant.ms11.net/sp162fl.htmlIt usbser.sys 4.10.2224 to KB308349In my case, I think failure: usbser.sys 5.1.2600.5512 from SP3 to downgrade 4.10.0.2224 fix itI'm wrongThe file was failing Usbehci.sysI clarify for anyone reading my message Edited February 8, 2012 by gerislamico Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted February 6, 2012 Share Posted February 6, 2012 I will fix the USB problem soon. Thanks Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted February 7, 2012 Share Posted February 7, 2012 Updated Link to comment Share on other sites More sharing options...
egrabrych Posted February 7, 2012 Share Posted February 7, 2012 Only thing that did not work out so well was NUSB35, I got exclamation mark in device manager and updating etc. did not help, but going to NUSB33 fixed it. I need to see if putting NUSB35 separately helps.Maximus-Decim Native USB Drivers does not contain a Usbser.sysI think that between version 3.3 and 3.5 NUSB should not this be the difference. Link to comment Share on other sites More sharing options...
gerislamico Posted February 7, 2012 Share Posted February 7, 2012 (edited) Only thing that did not work out so well was NUSB35, I got exclamation mark in device manager and updating etc. did not help, but going to NUSB33 fixed it. I need to see if putting NUSB35 separately helps.Maximus-Decim Native USB Drivers does not contain a Usbser.sysI think that between version 3.3 and 3.5 NUSB should not this be the difference.Maximun Decim has nothing to do with usbser.sysYou're right I correcthttp://exuberant.ms11.net/sp162fl.htmlIt usbser.sys 4.10.2224 to KB308349One could try usbser.sys 5.0.2195.7006 last update http://bristols.zxq.net/windows2000/updates/ # kb813503 Not as I Do Edited February 7, 2012 by gerislamico Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted February 7, 2012 Share Posted February 7, 2012 One could try usbser.sys 5.0.2195.7006Module has no missing import links after running wdmcheck. It may be safe to use this version. I will test it.If all goes well it will be in the next update. Link to comment Share on other sites More sharing options...
tomasz86 Posted February 7, 2012 Share Posted February 7, 2012 Usbser.sys 5.0.2195.7006 comes from KB838417 which itself is buggy. Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted February 7, 2012 Share Posted February 7, 2012 Usbser.sys 5.0.2195.7006 comes from KB838417 which itself is buggy.I'll test both versions USBSER.SYS 5.0.2195.6655 + 5.0.2195.7006.The one that works best will be suitable for SP3. Thanks Link to comment Share on other sites More sharing options...
gerislamico Posted February 8, 2012 Share Posted February 8, 2012 @PROBLEMCHYLD As with usbser.sys I'm wrong, I started researching failed the USB Drive detection and found the solutionParticulary Solution to no detect USB DriveRemplaced Usbehci.sys 5.1.2600.1515 -> Usbehci.sys 5.0.2195.6882 NUSB3.5Video Explanation the Bug and Solutionhttp://www.mediafire.com/?ae2dj8wmgcbtyyb Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted February 8, 2012 Share Posted February 8, 2012 @PROBLEMCHYLD As with usbser.sys I'm wrong, I started researching failed the USB Drive detection and found the solutionParticulary Solution to no detect USB DriveRemplaced Usbehci.sys 5.1.2600.1515 -> Usbehci.sys 5.0.2195.6882 NUSB3.5I may have found a bug in "Intel® 82801EB (ICH5 Family) USB2 Enhanced Host Controller -24DD" of my COMPAQ D530 after installed latest 98 SESP 3.0 FINAL.The controller referred to USBEHCI.SYS 5.1.2600.1515(xpsp2.040410-0905). Fixing it I changed USBEHCI.SYS to v.5.00.2195.6882 The file works on most systems, so what I will do since only a few are having this problem, I will note and add the USBEHCI.SYS v.5.00.2195.6882.I also like the start menu banner, can you send it to me. Nice video btw. Thanks again. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now