raptor Posted January 6, 2003 Author Share Posted January 6, 2003 Nobody responded to my last entry ,so here goes ,i di get BSOD with the error messages Stop:0x0000007e(0xc0000005,0xfc6a57a7,0xfc968c64,0xfc968964) what do you think? Link to comment Share on other sites More sharing options...
MSNwar Posted January 6, 2003 Share Posted January 6, 2003 "STOP 0x0000007E" Error Message After You Upgrade to Windows XP Click Here After you upgrade your computer to Windows XP, you may receive the following STOP error message on a blue screen: STOP: 0x0000007E (0xC0000005, 0x804E518E, 0xFC938104, 0xFC937E04) SYSTEM_THREAD_EXCEPTION_NOT_HANDLED Note The four parameters in this... Stop Error 0x7E Occurs in Usbhub.sys If USB Bandwidth Consumption Exceeds 100 Percent Click HereIf you connect a Universal Serial Bus (USB) input device (such as a keyboard or mouse) to a Windows XP-based computer on which Windows XP Service Pack 1 (SP1) or the USB 2.0 update is installed, you may receive the following error message while you... Do any of the above conditions apply?Also, if you answer the questions we will be better able offer assistance. Link to comment Share on other sites More sharing options...
MSNwar Posted January 6, 2003 Share Posted January 6, 2003 Topics merged. Link to comment Share on other sites More sharing options...
FthrJACK Posted January 6, 2003 Share Posted January 6, 2003 NEVER do an "upgrade" of your operating system or these problems are what you get. backup your data, format the PC and do a clean install and all your woes should be solved. your pc will run a bit faster too i expect. Link to comment Share on other sites More sharing options...
raptor Posted January 6, 2003 Author Share Posted January 6, 2003 Did not get either message the only USB device i hooked was a digital camera . Link to comment Share on other sites More sharing options...
FthrJACK Posted January 7, 2003 Share Posted January 7, 2003 But you "upgraded" your operating system from windows 98 or ME right?didnt do a clean install of XP, but chose "i want to upgrade my operating system [Recomended]"why it says recommended i dont know because its no easier than the other way, yet doing it the "recomended" way just causes system problems and instability Link to comment Share on other sites More sharing options...
raptor Posted January 7, 2003 Author Share Posted January 7, 2003 Yes i did upgrade from me,is there anything i can do now? Link to comment Share on other sites More sharing options...
Drewdatrip Posted January 7, 2003 Share Posted January 7, 2003 Yes i did upgrade from me,is there anything i can do now?Back-upFormatClean install =Drew Link to comment Share on other sites More sharing options...
raptor Posted January 7, 2003 Author Share Posted January 7, 2003 By clean install do you mean buying xp and installing? Link to comment Share on other sites More sharing options...
Drewdatrip Posted January 7, 2003 Share Posted January 7, 2003 By clean install i mean a install from a blank Hard drive, with any Os you like=Drew Link to comment Share on other sites More sharing options...
Robertson Posted January 7, 2003 Share Posted January 7, 2003 By clean install do you mean buying xp...you should have already bought XP Link to comment Share on other sites More sharing options...
FthrJACK Posted January 7, 2003 Share Posted January 7, 2003 when you put the XP cd in your drive you are given the options:Do you wish to upgrade your current windows installation? (recomended)Continue with full install (advanced users)or something to that effect. the first option isnt much different to the last one in terms of screens you see etc.but what it does is remove some files and replace other on your windows installation and "merges" the two together. what results is unstable systems, drive issues, hardware not working (usually USB or sound) and overall slow system performance.The stop error you get is one such syptom, but could be caused by other factors... the other main one you have ruled out. im pretty sure you chose the "recomended" option when installing XP...backup your files you want to keep.format your hard drive (you can do this in "advanced user" install) just delete the partition with XP on it, then create new partition and windows will the proceed to install as normal.you do all of that in the XP install screens, set your BIOs to boot from CD if it isnt already, pop the xp CD in and restart it.DONT select "upgrade" this time round, this should cure your issues.if you didnt do that option last time, try this:if you have service pack one installed you will need a Slipstreamed windows XP cd.put the CD in your drive then go to the START button.go to RUN.in the runbox type sfc /scannowthen press OK or hit enter.thats sfc<SPACE>/scannowWindows will check system files and replace any that are damaged or different from on the CD, it might well fix your problem. Link to comment Share on other sites More sharing options...
MSNwar Posted January 7, 2003 Share Posted January 7, 2003 I like it when he talks like that. Link to comment Share on other sites More sharing options...
Robertson Posted January 7, 2003 Share Posted January 7, 2003 hehe, does it turn you on msnwar Link to comment Share on other sites More sharing options...
raptor Posted January 7, 2003 Author Share Posted January 7, 2003 Thanks everybody for your help i'll let you know how it turns out .Qne more question ,what is a slipstreamed cd? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now