PROCESS1_INITIALIZATION_FAILED

[RAMI7250]

is anybody knows?

im not understand..

[tjhart85]

You are going to have to give us more information than that. When does this happen. Does XP install and this shows up afterwards? Does this show up before the installation begins?

Make sure you include WINNT.SIF (REMEMBER, asterisk out your product key).

[RAMI7250]

sorry on the duble massege..

[RAMI7250]

sorry..

You might want to reupload your WINNT.SIF without the serial number! -gamehead200

TXTSETUP.SIF

Last_Session.ini

Edited May 18, 2005 by gamehead200

[RAMI7250]

ok.

here some more information:

i reccive that massege after the install load the drivers

and before the HD setup comming up..

i have put in the WINNT.SIF

DOWN-here is my WINNT.SIF

the TXTSETUP file

and the "Last Session" file

tnx on the help

[binh25]

You need the system32 dir in the same place as your setupldr.bin and txtsetup file

windows 2003 use that system32 just before it scanning your system for disk..

here is what your dir should look like

w2k3

system32

i386

|system32

etc...

w2k3 is your root windows 2003 in your All in one boot disk.

Binh

[RAMI7250]

but its not for the xp setup

and i have the xp setup!!

[binh25]

Same install process applied to windows XP

try it and it will solve your problem..

[gamehead200]

sorry..

<{POST_SNAPBACK}>

Yay... A free serial number!!

You MIGHT want to remove it and reupload the file!

[BrandonS_Mil]

Since no one want to give you any obvious help I will.

If you go to Microsoft link.... http://support.microsoft.com/default.aspx?...kb;en-us;115579

This should help....

[RAMI7250]

gamehead200-

it ok man.. im understand..

BrandonS_Mil-

no man- its not help...

by the way- i have some news -

the problem was on the ntoskrnl.ex_ and the ntkrnlmp.ex_ files

somehow this files was failed the install.. waht i was doing and have i solve

that problem?

here is the anware:

i take from another cd (UN-ED from my friend- are work perfect)

and in his I386 - i take the file "ntkrnlmp.ex_" and comprees to "ntkrnlmp.exe" and i put that file (only!!) in the I386 folder

and i remove the ntoskrnl.ex_ and the ntkrnlmp.ex_ files

and im solve that problem!- now i have the same massege on the start

of GUI setup.. U can see at this topic:

http://www.msfn.org/board/index.php?showtopic=46431