Vista wont boot past setup?

[windows95__]

Just trying to dual boot vista with windows 7 on my laptop. Setup runs fine, but the first boot results in stop code 0x0000001E and what looks like memory addresses and no more. I know its a kmode error, but it doesnt say that. When i boot into windows 7, it boots fine. The system is configured to use uefi and legacy, with legacy boot set as priority. I know that vista sp2 should be able to boot off of gpt, or even uefi. What is causing this problem? 

[jaclaz]

Vista and UEFI/GPT is tricky (if it works at all).

In practice there is the need of a number of concurrent settings in the UEFI and these may not be possible on your specific machine.

Try reviewing this thread, maye something there helps.

https://msfn.org/board/topic/176341-windows-vista-sp1sp2-uefi/

jaclaz

[windows95__]

11 hours ago, jaclaz said:

Vista and UEFI/GPT is tricky (if it works at all).

In practice there is the need of a number of concurrent settings in the UEFI and these may not be possible on your specific machine.

Try reviewing this thread, maye something there helps.

https://msfn.org/board/topic/176341-windows-vista-sp1sp2-uefi/

jaclaz

Already looked there, didnt really find what i needed. I know its possible for sp1 to be installed in gpt/uefi, so im gonna keep trying.