WildKat Posted April 17, 2004 Share Posted April 17, 2004 Ive recently upgraded my motherboard but kept my original CPU. It heats up a lot more than it used to (same heatsink/fan). It used to run at 55'c average but now runs at 70'c average. Is this safe and will it ruin the CPU? Im thinking it could be the low amount of thermal paste but am not sure.CPU is P4 3.06ghzThanks Link to comment Share on other sites More sharing options...
S7a5 Posted April 17, 2004 Share Posted April 17, 2004 ye i think it's very high and I think 80C and higher can melt you cpu in liguid here are some useful thinks to do/check:-check if the thermal sensor is properly attached to CPU-apply arctic silver 5 solution instead of silicon and chip thermal pastes-get yourself a bigger heatsink and cooler (like www.thermaltake.com)Im thinking it could be the low amount of thermal paste but am not sure.>>U never need to put big amount of thermal compounds just make sure u cover it with a thin layer all over the die surface. Link to comment Share on other sites More sharing options...
WildKat Posted April 17, 2004 Author Share Posted April 17, 2004 ok, how do I take off the old thermal paste? Link to comment Share on other sites More sharing options...
S7a5 Posted April 18, 2004 Share Posted April 18, 2004 1 open the heatsink carefully (never apply pressure on cpu die)2 clean the die carefully with alcohol without leaving any old thermal material and clean the heatsing with a nail polisher followed by alcohol3 after cleaning part, apply a thin layer of thermal compound (never mix 2 compunds together) all over the cpu die surface (can be done with a pen)4 install carefully the heatsink (be careful to do not crack the die and do not apply presuure)5 u r done!btw check the FSB frquency, it could be that u've put it higher than it's suppose to be unlesss u r not overclocking Link to comment Share on other sites More sharing options...
XtremeMaC Posted April 18, 2004 Share Posted April 18, 2004 **** i should apply this as wellmy amd heats up too much!never ever seen a intel processor at 70C. usually they're like 36C. my amd athlon xp 2500+ runs at 45C, in summer about 60C. my box gets sun from all around it (i should get solar panels )from which brand/model mb did u switch from & to ? Link to comment Share on other sites More sharing options...
Aaron Posted April 18, 2004 Share Posted April 18, 2004 Did you reset the CMOS on your new motherboard after installing the CPU to it? Link to comment Share on other sites More sharing options...
CDog Posted April 18, 2004 Share Posted April 18, 2004 It used to run at 55'c average but now runs at 70'c average.Well even 55c average is high - I'd suggest you get a better cooler and follow the information people above have posted. I have a P4 3.0CGHz /w HT and cool it with a ThermalRight SP94 CPU Cooler averaging about 34c... Link to comment Share on other sites More sharing options...
WildKat Posted April 18, 2004 Author Share Posted April 18, 2004 I changed from an old Gigabyte to a new Gigabyte motherboard. I think I do need a new heatsink/fan, when playing UT2004 I get the warning beeps because the CPU is going over 70'c. Nothing is overclocked apart from my Graphics Card.The current heatsink/fan is a standard OEM looking aluminium heatsink with copper centre and coolermaster fan.Can anyone recommend a standard size heatsink/fan that works well and isn't too loud. I was thinking of buying the OEM Sanyo solution that comes with the retail pack 3.4ghz P4. Price range upto £20.edit: any free software that lets you monitor cpu temp / fan speeds? Link to comment Share on other sites More sharing options...
Chaosratt Posted April 18, 2004 Share Posted April 18, 2004 That is just a tad bit hot for an Intel.My XP 3000 even with a 200mhz OC is at 33C idle, though something called the "cpu diode" is reporting a temp of 46C, and the case is running a pleasant 22C Link to comment Share on other sites More sharing options...
Bâshrat the Sneaky Posted April 26, 2004 Share Posted April 26, 2004 ...80C and higher can melt you cpu in liquid...I don't think so... That's a bit overreacting IMO... Link to comment Share on other sites More sharing options...
Chaosratt Posted April 26, 2004 Share Posted April 26, 2004 Lol, hes right /\80C isnt even to the boiling point of watter, let alone the melting point of metal. Link to comment Share on other sites More sharing options...
WildKat Posted April 28, 2004 Author Share Posted April 28, 2004 OK, I installed a new Thermaltake Spark 7, now my temps are 32c idle and 52c on load. Massive difference.However, major problem with the noise, it sounds like a jet engine!! Any easy ways to sound deaden without restricting much airflow?PC has been on for 2 hours and I have a headache! Plus it gets louder on load when the RPMs go up. Link to comment Share on other sites More sharing options...
jayroller Posted April 29, 2004 Share Posted April 29, 2004 edit: any free software that lets you monitor cpu temp / fan speeds?I'd suggest CoolMon, with Motherboard Monitor, very configurable, very handy, very free Link to comment Share on other sites More sharing options...
WildKat Posted May 1, 2004 Author Share Posted May 1, 2004 Got a bit of a problem, computer stopped booting and BIOS was really slow to react to keyboard presses. So I cleared the CMOS. Now it boots but I cant change anything at all in BIOS (which still runs slow) otherwise itll freeze just after memory test.No idea how this problem occured, I flashed to latest BIOS months ago and have not had any issues until now. I tried the older version BIOS but no luck.Help!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now