Universal Silent Switch Finder 0.1

**sohail_sohail7** · April 5, 2007

PEiD-0.94-20060510 Download Link:

http://www.megaupload.com/?d=OPWCNG6D

**bbluehawk** · October 21, 2007

I can't download peid.exe. Please tell me why

**Fungus** · October 22, 2007

http://www.secretashell.com/codomain/peid/...94-20060510.zip

**Triel** · January 2, 2008

Here is the link for PEiD on Softpedia

http://www.softpedia.com/get/Programming/P...D-updated.shtml

Laso, you can find it on number 2 server here

http://www.peid.info/

To bad the program has not been updated since May of 2006.

Edited January 2, 2008 by Triel

**stevecharon** · January 8, 2008

Hi, I have changed the beginning of ussf.au3 to check, if it got a file as parameter (rightclick and open with ussf).

And also to check where peid.exe is sitting (3 locations: scriptdir (dir of ussf), windowsdir and systemdir)

Only 1 file is checked, so no multiselect please. If more files are selected prior to rightclick the one under the mouse is checked.


; <AUT2EXE VERSION: 3.1.0.1>

; ----------------------------------------------------------------------------
; <AUT2EXE INCLUDE-START: D:\Dokumente\AutoIT Test\USSF.au3>
; ----------------------------------------------------------------------------

AutoItSetOption ( "TrayIconHide", 1)

If FileExists(@ScriptDir & "\peid.exe") Then
   $peiddir = @ScriptDir
  ElseIf FileExists(@WindowsDir & "\peid.exe") Then
   $peiddir = @WindowsDir
  ElseIf FileExists(@SystemDir & "\peid.exe") Then
   $peiddir = @SystemDir	
  Else
   MsgBox(0,"Error", "peid.exe not found!")
   Exit
EndIf

If $CMDLINE[0] <> 0 Then
	$FileName = $CMDLINE[1] 
	;MsgBox (0, "Parameter", "Es wurde: " & $pars & " eingegeben.")
	Else 
	$FileName = FileOpenDialog("Select Installer to analyse", @WorkingDir, "(*.exe)", 1)
EndIf


;msgbox(0,"Info","" & $FileName)
If @error <> 1 Then

Run ($peiddir & "\peid.exe -hard " & '"' & $FileName & '"' ,"", @SW_HIDE)
WinWait ("PEiD v0.9")
$IDString= ControlGetText("PEiD v0.9", "", "Edit2")
SplashTextOn("USSF 0.11", "Scanning...",300,200)

While ($IDString ="Scanning...") or ($IDString ="")
  Sleep (100)
  $IDString= ControlGetText("PEiD v0.9", "", "Edit2")
WEnd

SplashOff()

WinClose ("PEiD v0.9")
$foundsomething = "n"
;msgbox(0,"Universal Silent Switch Finder 0.1",$IDString)
If StringInStr ($IDString, "Inno Setup") Then
  msgbox(0,"Results","This is an Inno Setup installer." & @CR & @CR & _
  "Silent switches are:" & @CR & _
  "/SILENT or /VERYSILENT" & @CR & @CR & _
  "Additional switches are: " & @CR & _
  "/SP-  Disables the ""This will install... Do you wish to continue?"" prompt at the beginning of Setup." & @CR & _
  "/NOCANCEL  Prevents the user from cancelling during the installation process." & @CR & _
  "/NORESTART  Instructs Setup not to reboot even if it's necessary." & @CR & _
  "/SAVEINF=""filename""  Instructs Setup to save installation settings to the specified file." & @CR & _
  "/LOADINF=""filename""  Instructs Setup to load the settings from the specified file after having checked the command 

line." & @CR & _
  "/DIR=""x:\dirname""  Overrides the default directory name displayed on the Select Destination Location wizard page." & @CR 

& _
  "/COMPONENTS=""comma separated list of component names""  Overrides the default components settings.")
  $foundsomething = "y"
EndIf

If StringInStr ($IDString, "Wise") Then
  msgbox(0,"Results","This is a Wise installer." & @CR & @CR & _
  "Silent switch is:" & @CR & _
  "/s" & @CR & _
  "Alternative switches are: " & @CR & _
  "/x ""x:\dirname""  Extract (don't install) files to path")
  $foundsomething = "y"
EndIf

If StringInStr ($IDString, "Nullsoft") Then
  msgbox(0,"Results","This is a Nullsoft NSIS installer." & @CR & @CR & _
  "Silent switch is:" & @CR & _
  "/S  (all switches must be upper case)" & @CR & @CR & _
  "Additional switches are: " & @CR & _
  "/D=""x:\dirname""  Install program to path" & @CR & _
  "/NCRC  Skip CRC check")
  $foundsomething = "y"
EndIf

If StringInStr ($IDString, "Installshield AFW") Then
  msgbox(0,"Results","This is an Installshield installer." & @CR & @CR & _
  "First unpack the monolithic setup file with WinRar." & @CR & _
  "You either have a .CAB or .MSI based installer." & @CR & _
  "For CAB based:" & @CR & _
  "Record an installation with this command:" & @CR & _
  "Setup.exe /r /f1""c:\setup.iss""" & @CR & _
  "Now you can perform a silent installation with the iss file:" & @CR & _
  "Setup.exe /s /f1""c:\setup.iss""" & @CR & _
  " "& @CR & _
  "For MSI based:" & @CR & _
  "Msiexec /i setup.msi /qb")
  $foundsomething = "y"
EndIf

If StringInStr ($IDString, "Installshield 2003") Then
  msgbox(0,"Results","This is an Installshield 2003 installer." & @CR & @CR & _
  "Try to retrieve the MSI file from the temp folder during installation." & @CR & _
  "Then install with:" & @CR & _
  "Msiexec /i setup.msi /qb")
  $foundsomething = "y"
EndIf

If StringInStr ($IDString, "RAR SFX") Then
  msgbox(0,"Results","This is a selfextracting RAR archive." & @CR & @CR & _
  "The RAR comment contains the setup script.")
  $foundsomething = "y"
EndIf

If StringInStr ($IDString, "ZIP SFX") Then
  msgbox(0,"Results","This is a selfextracting ZIP archive." & @CR & @CR & _
  "Extract the files and investigate further.")
  $foundsomething = "y"
EndIf

If StringInStr ($IDString, "WinZip") Then
  msgbox(0,"Results","This is a selfextracting WinZip archive." & @CR & @CR & _
  "Extract the files and investigate further.")
  $foundsomething = "y"
EndIf

If $foundsomething <> "y" Then
  msgbox(0,"Results","Sorry, unknown installer.")
EndIf
;msgbox(0,"Universal Silent Switch Finder 0.11",$IDString)
EndIf

; ----------------------------------------------------------------------------
; <AUT2EXE INCLUDE-END: D:\Dokumente\AutoIT Test\USSF.au3>
; ----------------------------------------------------------------------------

Don't know if this code is the most recent. But I hope you get the point.

If anyone has newer versions please update in order to have those rightclick-feature often mentioned in this thread.

To use it, import this:


Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOT\exefile\shell\Identify with USSF\command]
@="\"C:\\Windows\\ussf.exe\" \"%1\""

Edited January 8, 2008 by stevecharon

**elsisy** · February 23, 2008

thxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

**akhlaque** · March 17, 2008

I am getting "sorry, Unknown Installer" error when I run USSF.exe and browse to the setup.exe

please help... i want to find silent unstall commandline for one of my setups.

**radix** · March 17, 2008

I am getting "sorry, Unknown Installer" error when I run USSF.exe and browse to the setup.exe
please help... i want to find silent unstall commandline for one of my setups.

Just name it.

**akhlaque** · March 17, 2008

I am getting "sorry, Unknown Installer" error when I run USSF.exe and browse to the setup.exe
please help... i want to find silent unstall commandline for one of my setups.
Just name it.

Sorry Radix.. i dint understand..

**radix** · March 17, 2008

i dint understand..

For what application do you want to find the switches for silent install ?

**akhlaque** · March 17, 2008

Business object 6.5.4 Hotfix 81 is the application name

actually its not working for any setup.exe.

I tried with other and got the same error...

though i have kept peid.exe in the same folder as USSF.exe

when i run peid.exe its doesnt give any option to find the commandline...

actually i dont kno how to use this...

can also tell me the procedure please..

Edited March 17, 2008 by akhlaque

**radix** · March 17, 2008

can also tell me the procedure please..

I don't know. Try to unpack with Universal Extractor and see what message appear.

Or provide a link for download (if is available).

**akhlaque** · March 17, 2008

I don't know. Try to unpack with Universal Extractor and see what message appear.
Or provide a link for download (if is available).

I need to unpack what?

setup.exe???

**radix** · March 17, 2008

I need to unpack what?
setup.exe???

If you have multiple files (not just an installer) forget about Universal Extractor.

And if that program is not available for download somewhere I can't help you.

**MHz** · March 18, 2008

Business object 6.5.4 Hotfix 81 is the application name

If you search the website of Business object, then you may find they have good support to answer you question. I downloaded a PDF here that shows you a picture of the installation and I can see InstallShield branded on the window. It also tells you where to get information about silent install by searching for KB article c2014706 found here which lists InstallShield switches to use. The website seems to require IE to view so use IETab in Firefox or IE to view.

actually its not working for any setup.exe.
I tried with other and got the same error...
though i have kept peid.exe in the same folder as USSF.exe
when i run peid.exe its doesnt give any option to find the commandline...
actually i dont kno how to use this...
can also tell me the procedure please..

If PEiD does not identify it then you will need to search for switches yourself. Look for branding etc when starting a manual installation to notice installer type used. Only several installer types support switches thus automation or repacking... etc may need to occur for unattended installation for those that do not support switches.

Sign In

Universal Silent Switch Finder 0.1

Recommended Posts

sohail_sohail7

bbluehawk

Fungus

Triel

stevecharon

elsisy

akhlaque

radix

akhlaque

radix

akhlaque

radix

akhlaque

radix

MHz

Please sign in to comment

Recently Browsing 0 members

Activity

Browse