ST3750330AS Spinning but no bios detect, wont stop.

[tidbit50]

I had this OEM Seagate 750 GB Baeeacuda 7200.11 with SD81 Firmware in my assistants computer for about 5 months working fine, then it quits being detected in bios and just keeps spinning. I have read over some of the other topics before I posted this... Is this a 0 LBA Error? or is it BSY Error? Victoria program does not recognize it... Paper weight huh?

[dencorso]

If you have questions about Seagate 7200.11, do read the READ_ME_FIRST, then read the FGA. If your questions remain unanswered after reading those two stickies, then post.

[BlouBul]

I had this OEM Seagate 750 GB Baeeacuda 7200.11 with SD81 Firmware...it quits being detected in bios and just keeps spinning. I have read over some of the other topics before I posted this... Is this a 0 LBA Error? or is it BSY Error?

Read it again (as dencorso suggested) Sounds like a classic case of BSY.

Paper weight huh?

Yes (or brick if you prefer)...

Until you use the procedure to unbrick it off course...