Octopuss Posted June 25, 2013 Share Posted June 25, 2013 (edited) Yea, it's weird.I am playing around with integrating IE10 right now. The actual integration goes without problems, but something is not compatible here. <component name="Microsoft-Windows-IE-ClientNetworkProtocolImplementation" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <CacheLimit>51200</CacheLimit> </component>Based on documentation, this value is in kilobytes. Well, something is different in IE10, and upon installation and first opening of options it yells out about the value being above the limit (or something), and automatically changes it to 1024. Apparently the stupid program works on megabytes basis now, which really is pain in the butthole. You'd think such very basic settings should be the same across various versions (it's still IE, damnit), but Microsoft knows better again... Edited June 25, 2013 by TheWalrus Link to comment Share on other sites More sharing options...
myselfidem Posted June 26, 2013 Share Posted June 26, 2013 About CacheLimit, the valid pass is using oobeSystem pass!Cheers Link to comment Share on other sites More sharing options...
Octopuss Posted June 26, 2013 Share Posted June 26, 2013 (edited) Oh. You're right. Why does it work then? (for default image at least)And ironically, the WSIM never gave me an error when validating it like this Edited June 26, 2013 by TheWalrus Link to comment Share on other sites More sharing options...
Tripredacus Posted June 27, 2013 Share Posted June 27, 2013 And ironically, the WSIM never gave me an error when validating it like this WSIM only validates against whatever rules are kept in the catalog file. It has no idea about how Windows actually behaves when it processes the file. Case in point, if you were to put an invalid character in ComputerName, WSIM won't catch this. But Windows will throw an error when it tries to set it during an install. Link to comment Share on other sites More sharing options...
maxXPsoft Posted June 28, 2013 Author Share Posted June 28, 2013 Finally figured out how to install my printer a Kodak ESP C315 AiO although not completely silentIt has an AIO installer. I start it and let it download to %Temp% and capture that folder. AppData\Local\Temp\KodakKbiDownloadI copy it to %Temp% with my runoncex cmdsI then can call the cmd /k aio_install.exe and it uses the folder in %Temp% so it don't download again unless it was updated.The /k stops the cmd window so the aio_install will finish since it starts several other programs and drops out itself during the processI then close the cmd /k window when it is done and rest of APPS continues.Some will say just execute all the msi installers for different portions silently.Well I tried that but you end up with 5-6 different programs under add/remove instead of just 1 = KODAK AiO SoftwareAlso a new trick to get the reg key deleted that would not normallyREM 32 bit reg key on 64 bit PCREG ADD %KEY%\iAdd /V Inum /D "CMD /C REG DELETE HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Run /v \"EKStatusMonitor\" /f" /f""[Kodak_ESP_C315]REM http://support.en.kodak.com/app/answers/list/c/890/session/L3RpbWUvMTM3MjQzNjk5OC9zaWQvY215MlhUdGw%3D%2Fselected%2Ftrue/selected/trueREG ADD %KEY%\iAdd /VE /D "Kodak ESP C315 AiO Version 7.7" /fREG ADD %KEY%\iAdd /V Inum /D "CMD /C MKDIR \"%userprofile%\AppData\Local\Temp\KodakKbiDownload\"" /fREG ADD %KEY%\iAdd /V Inum /D "CMD /C XCOPY "%SystemDrive%\APPS\Kodak_ESP_C315\KodakKbiDownload" \"%userprofile%\AppData\Local\Temp\KodakKbiDownload\" /E /H /Y" /fREG ADD %KEY%\iAdd /V Inum /D "CMD /C Start /Wait Timeout 2" /fREG ADD %KEY%\iAdd /V Inum /D "CMD /k Start /Wait %SystemDrive%\APPS\Kodak_ESP_C315\aio_install.exe" /fREG ADD %KEY%\iAdd /V Inum /D "REGEDIT /S %SystemDrive%\APPS\Kodak_ESP_C315\Kodak.reg" /fREG ADD %KEY%\iAdd /V Inum /D "CMD /C REG ADD \"HKLM\SYSTEM\CurrentControlSet\services\Kodak AiO Network Discovery Service\" /v Start /t REG_DWORD /d 00000003 /f" /fREG ADD %KEY%\iAdd /V Inum /D "CMD /C REG ADD \"HKLM\SYSTEM\CurrentControlSet\services\Kodak AiO Status Monitor Service\" /v Start /t REG_DWORD /d 00000003 /f" /fFLAG2=%USERPROFILE%\AppData\Local\Eastman_Kodak_Company\AiOHomeCenter.exe_StrongName_h2jkkt3om0ki15qrplv254tjzyxeklfc\7.7.6.0\user.configREG ADD %KEY%\iAdd /V Inum /D "CMD /C DEL \"%ALLUSERSPROFILE%\Desktop\Get CleanPrint.lnk\"" /fREG ADD %KEY%\iAdd /V Inum /D "CMD /C DEL \"%ALLUSERSPROFILE%\Desktop\PrintProjects.lnk\"" /fREG ADD %KEY%\iAdd /V Inum /D "CMD /C DEL \"%ALLUSERSPROFILE%\Desktop\KODAK AiO Home Center.lnk\"" /fREG ADD %KEY%\iAdd /V Inum /D "CMD /C \"%ProgramFiles%\PrintProjects\uninst.exe\" /S" /fREG ADD %KEY%\iAdd /V Inum /D "CMD /C REG DELETE HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run /v \"Conime\" /f" /f""REM 32 bit reg key on 64 bit PCREG ADD %KEY%\iAdd /V Inum /D "CMD /C REG DELETE HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Run /v \"EKStatusMonitor\" /f" /f"" Link to comment Share on other sites More sharing options...
zorro1 Posted July 8, 2013 Share Posted July 8, 2013 Hello,sorry for my EnglishWhat is the difference between these actions in autounattendDisk wcm:action="add" or "Modify" ou "Remove"ModifyPartition wcm:action="add" or "Modify" ou "Remove"I have disk 0 with 3 partitions 1=100mo 1= 100000 and the last for dataI won't touch my third partition, just delete the 100 MB partition and one 100 GB and recreate them in my autounattend.can someone there help me?thanks Link to comment Share on other sites More sharing options...
compstuff Posted July 12, 2013 Share Posted July 12, 2013 (edited) I am going nuts with an XML issue and I am doing further testing but heres where I am so far:if I use my original WIN7x74 Enterprise WIM and create a new xml with WAIK it shows me that IE8 has options for pass4 so I add them and the properties show ENABLED TRUEIf I use my integrated WIM created with WinToolKit and create a new xml it shows me IE10 options so I add them BUT the properties always show ENABLED FALSEI have tried this over and over but can't get the option to ever say TRUE... any ideas? I will be running fresh tests today to see what actually runs from the xml and what doesn't Edited July 12, 2013 by compstuff Link to comment Share on other sites More sharing options...
maxXPsoft Posted July 13, 2013 Author Share Posted July 13, 2013 (edited) I have tried this over and over but can't get the option to ever say TRUE... any ideas? I will be running fresh tests today to see what actually runs from the xml and what doesn'tAttach your xml without serial, private data, only way we can see what is going wrong Edited July 13, 2013 by maxXPsoft Link to comment Share on other sites More sharing options...
compstuff Posted July 13, 2013 Share Posted July 13, 2013 Thank you VERY MUCH!!!Autounattend-HELP.xmlI have tried this over and over but can't get the option to ever say TRUE... any ideas? I will be running fresh tests today to see what actually runs from the xml and what doesn'tAttach your xml without serial, private data, only way we can see what is going wrong Link to comment Share on other sites More sharing options...
maxXPsoft Posted July 17, 2013 Author Share Posted July 17, 2013 It shows enabled for me. What did you change from xml you posted? Do not mix IE8 stuff with IE10. Remove all IE stuff and re add so it is correct because things change with every version Link to comment Share on other sites More sharing options...
Tripredacus Posted July 17, 2013 Share Posted July 17, 2013 Especially IE10. For example if you have IE10 in your image and use an answerfile that has DisableWelcomePage, you will get an error during install. Link to comment Share on other sites More sharing options...
compstuff Posted July 18, 2013 Share Posted July 18, 2013 Thanks for the response... but I am even more confused now because I have done at least 7 vbox installs with IE10 and my XML does have DisableWelcomePage true and I get no errors. For clarification I am using the latest deployment toolkit.Especially IE10. For example if you have IE10 in your image and use an answerfile that has DisableWelcomePage, you will get an error during install. Link to comment Share on other sites More sharing options...
compstuff Posted July 18, 2013 Share Posted July 18, 2013 WOW I don't understand how it shows enabled for you... man that confuses me! I.m not sure I understand what you mean by IE8 and IE10 stuff together. I have created new clean xml files quite a few times by taking my IE10 integrated image, building a new catalogue file and then just adding components to it. When I add the IE10 items I do see both 8 & 10 but I only select 10 to add to pass 4. When I add it the enable is true, I validate it's fine, I save it's fine but when I close and reopen it's always enabled false.... I am totally confused by this.My options IE options under components:Very Basic xml with only IE10 added and only 1 option changed... it says false:It shows enabled for me. What did you change from xml you posted? Do not mix IE8 stuff with IE10. Remove all IE stuff and re add so it is correct because things change with every version Link to comment Share on other sites More sharing options...
Tripredacus Posted July 18, 2013 Share Posted July 18, 2013 Thanks for the response... but I am even more confused now because I have done at least 7 vbox installs with IE10 and my XML does have DisableWelcomePage true and I get no errors. For clarification I am using the latest deployment toolkit.Especially IE10. For example if you have IE10 in your image and use an answerfile that has DisableWelcomePage, you will get an error during install.Ok well I will say then that it can and does happen. Apparently not 100% of the time. The reason being is that IE10 doesn't have a Welcome Page. So just so you know that you could run into this problem at some point. BUT I also learned something new! It is only deprecated on Windows 8, but doesn't throw an error on Windows 7.http://technet.microsoft.com/en-us/library/ff716441.aspx Link to comment Share on other sites More sharing options...
maxXPsoft Posted July 18, 2013 Author Share Posted July 18, 2013 (edited) &nbsp;WOW I don't understand how it shows enabled for youdelete this line<cpi:offlineImage cpi:source=Then go to e:/_slipstream/_7builds/technet/w7t_7sp1x64ent_technet-step-2-sfx/sources and delete the .clg file and reload this in wsim. rebuild catalog file Edited July 18, 2013 by maxXPsoft Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now