MysteryFCM Posted February 26, 2008 Posted February 26, 2008 I'm coming across more and more Inno setups that UE is unable to unpack, such as;perfectuninstaller.com/PerfectUninstaller_Setup.exeThe error data from UE is;Signature detected: Inno Setup Setup Data (5.2.1)This is not directly supported, but i'll try to unpack it as version 5110; Version detected: 5201Critical error: The setup files are corrupted. Please obtain a new copy of the program.Unpacking failed. This version is not supported.
mushu13 Posted February 26, 2008 Posted February 26, 2008 (edited) Update the innounp.exe inside the UniExtract\bin\ directory with the one in this file:http://innounp.sf.net/test020.rar Edited February 26, 2008 by mushu13
nitro322 Posted February 29, 2008 Posted February 29, 2008 This is a common question, so I"m setting this as a sticky. If you are unable to extract current Inno Setup installers, this should be the first thing to try. However, check here first for an official update:http://innounp.sourceforge.net/If there is no official update (0.19 is the current stable version at the time of this post), then go ahead and download the latest test version that mushu13 referenced.
KyotoMint Posted March 3, 2008 Posted March 3, 2008 (edited) I just thought I might add, even with the latest innounp the current release of uni extract will fail on certain versions of Inno (ex. v5.1.5). This has nothing to do with innounp itself, which can upack the files fine, but with peid's definition files. I attempted to add custom OEP sigs for newer versions but for some reason peid won't pick them up while in use by peid.I don't know what you've done in new unreleased version but if I remember correctly finding an alternative to using peid was on your todo list. If not, maybe a modded version of peid is in order that will pick up the custom def files (I could be doing something wrong as well) as well as not overwrite settings in registry. I have two copies of peid, one with a batch of plugins and such and then one being used by uni extract. I think I posted a modded version of peid to prevent it from writing to registry its own settings so as to not mess up my standalone version.edit:Thought I would add an example. Scanning this installer with peid stock def files you get "Borland Delphi 2.0 [Overlay]" but if I do an "External scan" it picks up the definitions I made and correctly identifies it as "Inno Setup Module v5 [Overlay] *". So when uni extract scans this file it sees it as a delphi file and rejects it.http://www.gertrudisgraphics.com/GertFullSetup1_0_0_0636.EXE Edited March 3, 2008 by KyotoMint
GrofLuigi Posted April 10, 2008 Posted April 10, 2008 The number of packages using InnoSetup > 5.2 is ever increasing, and there are no new betas of InnoUnp. Any solution/suggestion?GL
mushu13 Posted April 10, 2008 Posted April 10, 2008 (edited) At the moment, there is not much we can do but hope for an updated innounp.We will have to keep an eye on the innounp forum.EDIT: The test version does work on IS 5.2.2 files, but not on IS 5.2.3 yet. Edited April 10, 2008 by mushu13
aququ Posted April 21, 2008 Posted April 21, 2008 I also have some problems with inno unpackingFew times UE 1.6 recognized inno installer as "probably ZIP archive" and unpacking failed with UE 1.6. The same installer in UE 1.5 was recognized as inno and unpacked without problems.Also I tried to unpack this....http://www.klitetools.com/comments.php?cat...p;shownews=2888Process started fine, but about the half of unpacking i heard my PC beep at each file that was extracted. The same is happening in UE 1.6 and 1.5. After unpacking some files have got terrible names (they look like strings of random characters) Thank you in advance for checking thisI really appreciate using UE everyday. It saves my system from unwanted trash left here and there after every install
GrofLuigi Posted May 24, 2008 Posted May 24, 2008 The long awaited new version of InnoUnp appeared, same url as above:http://innounp.sourceforge.netSupports Inno Setup versions 3.0.0-beta through 5.2.3GL
radix Posted May 24, 2008 Posted May 24, 2008 The long awaited new version of InnoUnp appeared, same url as above:http://innounp.sourceforge.netSupports Inno Setup versions 3.0.0-beta through 5.2.3GLThx. Great news.
nitro322 Posted May 24, 2008 Posted May 24, 2008 A new stable version of Innounp has finally been released, and supposedly supports up to Inno Setup 5.2.3. Try replacing the innounp.exe binary with the new version available from http://innounp.sourceforge.net/.Note: I have not tried this myself. Please post back whether or not it works so others can benefit as well.
mushu13 Posted May 25, 2008 Posted May 25, 2008 Innounp v0.20 is is confirmed working with isetup-5.2.3.exe (Inno Setup Installer, packed with 5.2.3)If it makes any difference, it is UniExtract 1.5 and 1.6b compatible. (Duh)
xtranophilist Posted May 28, 2008 Posted May 28, 2008 UE identifies Innos as Zip Archive because TrID says so.
war59312 Posted July 13, 2008 Posted July 13, 2008 worked on http://www.msfn.org/board/redirect.php?url...ecoverSetup.exe so i can confirm it works what would be really sweet is if universal extractor could self update, as in being smart enough to know when there is a new version of an internal tool used and ask the user if they wish to update and download the new build and then extract automatically...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now