D_block Posted December 2, 2007 Share Posted December 2, 2007 how do you find the ram speed when the Os is booted ? i know you can find it in the bios most times , but when your pc is fully booted up and stuff where do i go to find it ?i like to know for XP and for Vista !! Link to comment Share on other sites More sharing options...
nitroshift Posted December 3, 2007 Share Posted December 3, 2007 AFAIK Windows won't tell you the speed of your RAM, but you can use third-party software such as sisandra, everest or even cpu-z. Link to comment Share on other sites More sharing options...
PC_LOAD_LETTER Posted December 3, 2007 Share Posted December 3, 2007 Id use everest but if your just looking for real quick info about your board/ram try this:http://www.crucial.com/systemscanner (open that in IE -activeX required)it wont tell you the speed you have your ram clocked at but it will give you info about what speeds your board will support and whether itll do ECC/Dual channel Link to comment Share on other sites More sharing options...
D_block Posted December 3, 2007 Author Share Posted December 3, 2007 yuh see in kost casses you would have an idea what type of ram the pc supports,but when you want to do and upgrade from say 512 to 1024 you would need to have the both sticks of ram at the same speed . and it thee case that there is no internet available , i thought there may be a way that windows may have displayed this info Link to comment Share on other sites More sharing options...
Kelsenellenelvian Posted December 3, 2007 Share Posted December 3, 2007 ummmmm HELLO anyone CPU-Z???Its tiny quick and painless. Link to comment Share on other sites More sharing options...
nitroshift Posted December 3, 2007 Share Posted December 3, 2007 ummmmm HELLO anyone CPU-Z???Its tiny quick and painless.Read my post above ^^ Link to comment Share on other sites More sharing options...
Kelsenellenelvian Posted December 3, 2007 Share Posted December 3, 2007 urrrp my brain threw up I missed that part sorry. Link to comment Share on other sites More sharing options...
D_block Posted December 3, 2007 Author Share Posted December 3, 2007 (edited) ok i just tried out cpu-z i like how you dont have to install it but one thing is puzzling i have a 1024 ddr2 ram 533 mhz but its reading differently in cpu-z so this is very misleading if im using it to buy ram for a pc under the spd tab it reads it as 266 which is only half anyone care to explain Edited December 3, 2007 by D_block Link to comment Share on other sites More sharing options...
DigeratiPrime Posted December 4, 2007 Share Posted December 4, 2007 yuh see in kost casses you would have an idea what type of ram the pc supports,but when you want to do and upgrade from say 512 to 1024 you would need to have the both sticks of ram at the same speed .you only need to match the memory if you want to use "Dual Channel" if your motherboard supports it. Otherwise a pair of different memory will just run at the speed of the slowest module.i have a 1024 ddr2 ram 533 mhz but its reading differently in cpu-zyou computer is probably underclocking itself to save power and reduce heat if you are not doing anything intensive; your cpu "core speed" is probably also at 50%. Link to comment Share on other sites More sharing options...
puntoMX Posted December 4, 2007 Share Posted December 4, 2007 i have a 1024 ddr2 ram 533 mhz but its reading differently in cpu-zyou computer is probably underclocking itself to save power and reduce heat if you are not doing anything intensive; your cpu "core speed" is probably also at 50%.No no guys, it’s showing correct there; its 266MHz Double Data Rate, so 2*266=533MHz .When you want to see the type of RAM you are using, click on the SPD tab, or better, give us a screenshot from that view. The one that has been posted is (almost) useless... Link to comment Share on other sites More sharing options...
D_block Posted December 4, 2007 Author Share Posted December 4, 2007 This is the spd tab, are we talking about the listing above or the one below Link to comment Share on other sites More sharing options...
puntoMX Posted December 5, 2007 Share Posted December 5, 2007 Both,It’s hard to find the Manufacturer of that module; well at least I could not find it.If you want to upgrade or so, then buy a Kingston value RAM or ADATA(VDATA) 1GB 533MHz DDR PC-4200 module, just the cheapest versions. Link to comment Share on other sites More sharing options...
D_block Posted December 5, 2007 Author Share Posted December 5, 2007 it was actually for a guy's pc that i was lookingfor the info for, a laptop actually . in all the cases ive seen so far with pc's running two different speeds of ram, it usually crashes and creates video problems, so i wanted to know how to determine the correct speed to match his own Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now