Drewdatrip
Content Type
Profiles
Forums
Events
Posts posted by Drewdatrip
-
-
0
-
Dude, you're totally wrong, on my PC it supports 1 GB just fine from a fresh install! And if you have any problem the very article you posted a link to tells you how you can use a single line to clamp the disk cache! Did you even read your own link??
Maybe if you fired up 98 once every few years you would be more familiar with it.
Just becasue Win98 informs you that it registers over 512mbs of ram it does not mean that it can actully PAGE it. Belive me Win98 tops out at 512
|Drew|
0 -
If you flash a Mobo with the wrong bios, theres no turning back...
If you have a removable bios chip you can have it reflashed with the correct bios, some manufacutres do this for a charge, some dont do it at all. There are also some 3rd party companys that do this as well.
You could try to send the board in for service and have it replaced, if it is still under its warenty.
Other then those options your kinda out of luck
|Drew|
0 -
Unless your running a server or a small home biz that demands consistand bandwidth, there would eb no point to getting a T1.
Cox is very consistand, so unless you demand concurant up and downspeeds or 1.5 then it would be a waste of money.
|Drew|
0 -
The Stars are automaticaly giving according to post count. Its kinda of a ranking system to show users how helpful a particular user has been.
The stars dont give you more access or prividges, just abit more authorty when it comes to posts..
Thats about it
|Drew|
0 -
Ya i have had lots of issues with Klite
I would reccomend allinone codec. Its simple and auto updates.
|Drew|
0 -
Pretty much if you DONT know what SATA is then you most likley just need ATA.
You definatly dont have SATA if your computer is over about 7months old.
I would stick away from maxtor, but that is just me.
Reccomends are Western Digital and segate
|Drew|
0 -
You could program it on ur phone like auto dial. then wire it to a big button and run the wires thru your wall on a metal or wood plate.
|Drew|
0 -
You can always hide the installer so the user would not see it installin...
As for slimstreaming it im not sure you can do it..
|Drew|
0 -
1. This is not a warez site! Links/Requests to warez and/or illegal material (porn, cracks, serials, etc..) will not be tolerated. Discussion of circumventing activation/timebombs/keygens or any other illegal activity will also not be tolerated. If you ignore any of the aforementioned you will receive a final warning. If you choose to continue, you will be banned without notice.13. No user shall by any means of the forum: sell, trade or give away hardware, software, or any other non consumer electronic related material. MSFN does not support any type of trade and shall not be held accountable.
Topic Closed
0 -
Glad to see yet another excited user here at MSFN!
Welcome to the Community! I hope you enjoy your stay!
|Drew|
0 -
You have a few options.
If you want to install with one licence on all the machines you own you NEED a site licence, you can buy the rights to as many machines as you own and use the nessary code that is provided for the bisness.
If you do not already have this then this is probley not a great idea considering it would cost a great deal of cash, and from reading your posts your trying to avoid doing that.
Another and fully legit way of doing it would to to make a windows unattended cd using one particular Code from one of the many machines. Then incorperate a windows sysprep reseal into the OS and after you install all nessary apps and drivers, you can run the sysprep tool and reboot. Upon next start up it will prompt the user for the unique code attached to the workstation or desktop. this will then delete the previos code you used in the install and replace it with the unique one entered.
|Drew|
0 -
Topic Moved
0 -
Hes got LCD picture frames that have face recognition..if your programed into the homes server it will show the artists your like....
Crazy stuff
|Drew|
0 -
I like how they assume that casue we have a MS related Forum that we all love Windows and hate linux.
I dont think we have one debate stating that Windows is the best and linux sux.
If anything this forum was created to educate people about the ins and outs of MS related problems and how to fix and solve these issues.
We have created tools to make windows more versitile and user orinted...maybe if they looked into stuff like nlite and our reduction tools they would understand what this site is about....
I for one support both MS products and open sorce things such as Linux. I run both and use many applications on sorceforge...
Anywho i know i for one wont be joining their forum and trolling....i dont wish to sink to that lvl.
If people wish to use one thing over another let it be up to them
|Drew|
0 -
what is make it a 256 or 128 mb card?
Plz Reword that doesnt make much sence.
However is abit of info.
The most important factor in a Vid card is its GPU speed, the amount of Piplines, The bit of the pipelines, the Ram quantity and its Ramdac.
The Gpu is built ona a particualr Arichtecture and has a particular speed just like a CPU. In most cases the higher the better. However in some cases this is not always true, do to modifications in the internal workings that make it more efficent at lower speeds.
The amount of pipe Lines is the amount of data that can pass between the gpu, ram and your computer. In this case the more the better..and thats pretty much always the truth. Some of the best cards out currently have 12-16 pipelines.
The Pipe Lines also have bit ratings, and as i have explained, the higher the bit rating the more data can pass thru at a time. This is due to a increase of instructions per cycle, the higher the bit the more instructions per cycle. IE more bit more speed.
The finally the Ram Quantity doesnt always mean quantity. However more is generally better. THe RamDAC or speed of the ram is important, it dictacts how fast textures and instructions can be temporaly stored and buffered, which leeds to faster Frame rate and all around better performance.
Ummm ya i think that about covers it all
/End of Rant
|Drew|
0 -
It Means the card has a quantity of 256mbs of ram. And the memory pipline or bus between the the video ram and the GPU is 128bit. Generally the fater the bus the faster the card.
|Drew|
0 -
That's me. I think you know the wallpaper.
The page cannot be displayed
Edit: Looks like its working now
|Drew|
0 -
So youre saying that all you did was search for 'pdf' and post the next link to pdf creator after adobes site? Know how to use a search engine thanks.
Again.. looking for suggestions on a pdf creator. As in something youve actually tried and like..
Actully Durex, i looked into it, used the program and then made the recomendation.
Its simple and free...and those are the critria you requested. Where they not?
Its got a nag box and its kinda roundabout, but it workes very well.
You install the pdf printer driver and the app. Then you open the word doc, website etc, hit print, then select the PDF printer. Then it will ask you were to save it. From there you can use thier pdf editor and mod it to your liking.
So all in all i think its a preTty good find.
And next time think b4 you make a hasty judgment, you might wanna lookin what i sugest or question rather then just assuming its wrong
|Drew|
0 -
0
-
Ya stick away from ECS, everytime they come into my chop its the same thing.
"I woke up thismorning and my computer was off...and now it wont turn on"
I pop open the case, i see the ECS logo, and surly enough all the capisators are blown.
Stick with Asus, MSI, abit or even Foxconn
|Drew|
0 -
Well Little guy...I think you have arrived at one of the best and most informative places to learn about the interworkings of MS related software.
We have many guides, how to's and a massive forum database jam packed with answers to you many questions.
Check out the search feature...it can help you alot...
If yo cant seem to find a answer to your question feel free to post it in the proper section, it will mostly liklly be answerd promptly.
Good luck and Welcome to the MSFN community.
|Drew|
0 -
I like the LiteOn
Model: 1633S06C
16x Double Layer
The Device is so similar to the latest Sony drive you can reflash the LiteOn with its bios, and get the a speed increase on the Double layer side of the burning
I have sold several hundred of these Drives and had very few problems. They are very versitile when it comes to media. From what i can tell they really liek the Riteck or Ridata, which works out cause they are cheep and very good media.
|Drew|
0 -
0
How Do I Remove Ads In Msn 6.2?
in Software Hangout
Posted
Circumventing the application makers ads is against the law
Topic Closed