snakesnake

are you sure the serial is "oem dependant" ? I think (not sure) i read something about that a while ago, and if my memory is good, you could use any serial for any oem (respecting the fact that some serials are for premium, ultimate)

your serial is in the .sif

I tried it but i have an error when daemon tools launches

i have the same problem with sil 3114 method 1

noting special, everything seems to be ok, except it isn't i tryed ocne method 2 but i have an error message with presetup i think it is because of the script to find the cdrom letter (i have 4 cd-dvd) i can continue, but it's not unattend anymore i think astalavista had a similar problem with wpi (to launch wpi from cd)

but i don't think the problem is there If i delete the DP folder and replace it with the original ones not compressed (extract of the 7z files), everything works !

must be this

for the hardware id, tell me how to do, i don't know where to find it here are the contents of the CR\WDM folder after install it seems all (almost all) files have bad names, and some files are deleted and the expand.exe from my xpcd EXPAND.rar

base 5.03.1 graphics A 5.02.1 graphics B 5.02 LAN 5.02 MassStorage 5.03 Sound A 5.03 Sound B 5.03 WLAN 5.02 About the Sil 3114 As you can see on the screenshots, after windows install, it is called "Controlleur RAID" If i reinstall the drivers, it is called "Silicon Image Sil 3114SATARaid Controller" I use a french xp cd ! this name appears only after 1st login, after Sound_Control_Panels_1.cmd is launched

Hi I still have problems with all last driverpacks (method 1) 1 . audigy control panel I still have the message "cannot find .. cr.exe so the contlol panel doesn't install I join a screenshot of the CR folder before 1st login and after 1st login Before : the file is called CR.ex_ after : it is called CR.ex also : the file ctzapxx.in_ is renamed ctzapxx.inã I also have a problem with Raid Controller Sil 3114 it seems to install, but it doesn't install correctly during text setup, my drives on sil 3114 are correctly recognized but after setup, windows doesn't find the drives ! and the controller has a bad name i join a screenshot of the peripherals just after install and another one after i have reinstalled the drivers. after the reinstall the name changed and windows finds the drives attached to the raid controller If i try to install windows on a drive attached to sil 3114, it finds the drives, copy the files on the disk, and after the 1st reboot, i have a blue screen. If i install windows on a drive not on that controller, it seems to install correctly, but it doesn't I made another test I tried another cd, with the same driverpacks, but not compressed (always method 1) and then, everything was fine ! Isn't there a problem with compression method ?

i have a problem with the audigy contol panel (method 1) with dp base 5.02.9 and 5.02.10 here's the message i have at first logon i tried to see what the problem is and it seems the expand command in Sound_Control_Panels.cmd is not working correctly. the files in DP/S/CR are extracted in DP/S/CR/WDM and the files in DP\S\CR\WDM are extracted to DP\S\CR\WDM\WIN2K_XP after that, the batch file deletes the files, and doesn't find CR.EXE i join pictures where you can see the contents of the folders after the batch file is run

BSOD on abit ic7 max3 with sil 3114r

hmm... Then could you please specify? Is there NOTHING installed? Or when you start the control panel, it shows an error? Or...? More specificly: please check if these files exist in the folder %SystemRoot%\system32: -CtPanel.exe -CtCtrlPan.cpl ← the control panel just didn't install no errors i tried to install it manually (run the cmd file) and nothing happenend so i tried to replace all the files of the CR folder with the original ones in the archive (not compressed), ran again the cmd file, and then CP did install

that's the one i use

here is the error i have with the ati control panel i use dp base 5.0.2.8. If i use the original cpanel files (not compressed), it doesn't happen and the cpanel installs without problem i also have a problem with audigy 1 cpanel it doesn't install (without any messages) if i replace the CR files with the original ones (not compressed), the control panel installs also without problem. i don't know what the problem is

the error was the blue screen just after the txt setup, first reboot for the control panel, i'll try again and make some screenshots

i made a lot of tests dp masstorage i tried removing half of the drivers (3ware, acard, adaptec, ali, amd, dell, IBM, lsi, ite, qlogic, sis, via) and all their entries in txtsetup.sif and it didn't work i tried removing all the drivers exept si3114r , and it didn't work then i stopped i also have a problem with ati control panel, the file $OEM$\$1\DP\G\A\1\CPanel\ikernel.ex should be ikernel.ex_ this gives me an error, but if i rename the file to ikernel.ex_ and lauch again Graphics_Control_Panels.cmd , i also have an error

me too , but only with all driverpacks it doesn't happen with only DP masstorage

bashrat you rock everything is ok now in vmware i will try it for real tonight

i made some more tests and there's something really strange i made all the tests with a french version, i always have the ide cd rom error message so i tried with an english version, and i've had an other error. At the very beginning, setup says me it can't find txtsetup.oem ! (it's located in TEXTMODE folder) so i made a copy and put it in I386 and I386\$OEM$ folders and the error disapeared There was no IDE CD ROM error with the english version ! but i still have a blue screen at first boot (after setup) so i tried again with my french version Always the same IDE CD ROM error i also tried to copy the txtsetup.oem in the same folders, but it didn't change anything So with the same driverpack, on 2 different language versions of xp, i have different errors ! french and english xpcd's are both XP SP2

i've that code stop: 0x0000007B (0xF8967528, 0xC0000034,0x00000000,0x00000000)

it seems to be a problem with TXTSETUP If i delete the [MassStorageDrivers] and [OEMBootFiles] and all the related folders, i don't have this error any more but i have a BSOD at first boot (method 1)

yes base 5.02.6 with the fix i tried to integrate all the driverpacks then i modified the winnt.sif with all my parameters is there something wrong with winnt.sif ? [Data] AutoPartition=0 MsDosInitiated="0" UnattendedInstall="Yes" AutomaticUpdates=1 [Unattended] FileSystem=* OemPreinstall=Yes UnattendSwitch=No UnattendMode=FullUnattended OemSkipEula=Yes DriverSigningPolicy="Ignore" NonDriverSigningPolicy="Ignore" TargetPath=\WINDOWS WaitForReboot=No Hibernation=No OemPnPDriversPath="DP\G\A\1;DP\G\A\1\WDM_XP;DP\G\A\2;......." [MassStorageDrivers] "AMCC 3ware 9000 Series SATA RAID Controller for Windows"= OEM "AMCC 3ware 7000/8000 Series ATA RAID Controller for Windows"= OEM "3ware Escalade 6000 Storage Switch for Windows 2000/XP"= OEM "IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller"= RETAIL [OEMBootFiles] TXTSETUP.OEM 3wareDrv.cat 3wManage.inf oemsetup.inf 3wareDrv.sys 3wareFlt.sys 3wFrmDrv.sys AmccDrv7.cat 3wManage.inf oemsetup.inf 3wDrv100.sys 3wFlt100.sys DriverLanguageMap.xml 3waregsm.cat 3wareRun.exe 3wareSrv.exe oemsetup.inf 3waregsm.sys [GuiUnattended] AdminPassword=****** EncryptedAdminPassword=Yes OEMSkipRegional=1 TimeZone=105 OemSkipWelcome=1 [UserData] ProductKey=*****-*****-*****-*****-***** FullName="xxxxx" OrgName="" ComputerName=xxxxx [Display] BitsPerPel=32 Xresolution=1280 YResolution=1024 Vrefresh=60 [RegionalSettings] LanguageGroup=1 Language=0000080c [Identification] JoinWorkgroup=WORKGROUP [Networking] InstallDefaultComponents=Yes [Components] msmsgs=off msnexplr=off ;Désactivation du pare-feu intégré possible depuis le SP2 (voir l'aide dans "SUPPORT\TOOLS\DEPLOY.CAB") ;Note : Personnalisation du pare-feu dans l'aide [WindowsFirewall] Profiles = WindowsFirewall.TurnOffFirewall [WindowsFirewall.TurnOffFirewall] Mode = 0 [Branding] BrandIEUsingUnattended=Yes [Proxy] Proxy_Enable=0 Use_Same_Proxy=0 [Shell] CustomDefaultThemeFile = "%WinDir%\Resources\Themes\Alanis.theme" DefaultStartPanelOff = Yes [GUIRunOnce] %systemdrive%\install\regtweak2.cmd %SystemDrive%\DP\G\Graphics_Control_Panels.cmd %SystemDrive%\DP\S\Sound_Control_Panels.cmd %systemdrive%\install\WPI\wpi.cmd

I always have the ide cd rom error ! i tried with 2 different cd's and i always have that error

I tested the dp with version 5.04 method 1 no more error (cd rom), but the same fatal error Bâshrat has ( i removed the TEXTMODE folder and entries in winnt.Sif and it seem to work now (in vmware, i must test it for real), without the textmode drivers question : after integration of the drivers, i have [Unattended] DriverSigninPolicy="Ignore" NonDriverSigninPolicy="Ignore" in winnt.sif shouldn't it be DriverSigningPolicy=Ignore NonDriverSigningPolicy=Ignore ? i was too fast BSOD at first boot