blue4603

@trmfp It would be helpful if you post the log. Also, try the debug mode and see what goes on in the command screen. If there is an error take a screen-shot and post it here. @RamGuy Try the debug mode as trmfp and post your screen-shot. Regards

@qwas I do not know actually. By the way, I do not like your attitude. First, you flamed the hell out of me before reading the first post and now you are acting like you are the manager of this program or something. If you are here just to use the program and do not give any feedback, then I suggest that you do not post in this thread and just wait for the feature that you want. If you do not change your attitude, I am going to report you to the forum administration and will ignore all your posts in the future. From my experience with this forum members, I found that they are helpful, respectful and patient. I really appreciate this. Try to be like them. Regards

@qwas Yes. You are missing something. You should read the first post and you will find the info you need. Regards

@ajdee I did not understand your question. Anyway, you should integrate the correct drivers or it will make problems for you. @x-layer Glad it worked for you. Regards

@x-layer That is strange. From your log I can see that there is one windows edition. I will try to make an instalaation that has one edition just like yours. I hope I can find the problem and resolve it. @ajdee The information in the screenshots are in Sweden right? I only know English and Arabic only. Anyways, 7Customizer does not have a problem in integrating drivers. The problem is in the drivers. From what I understood from the DISM documentation, dism will integrate all your drivers even if they are unsigned but it will show you a warning. It will not show any error. In 7Customizer, I added the instruction to integrate unsigned drivers. So, I think your drivers are integrated successfully. If not, then the drivers have problems. Regards

@ajdee No. The driver does not need to be signed to integrate it in the image (It does not need WHQL certificate). Could you post a screenshot of the message that is shown? @x-layer Start 7Customizer. Choose your image and when the error comes, go to the work folder. You will find imagesinfo.xml there. Regards

@x-layer Could you post your imagesinfo.xml? Regards

@ajdee I will look into that but it will have to wait because I am working on the tweaks part now. Regards

@ajdee Yes you marked the Debug mode. @dcolpitts Thanks for the suggestions. It might be implemented in future releases. Regards

@pedilover I found the problem. I will fix it in the next release. Regards

@pedilover Could you make sure that your key is typed right in autounattended.xml. @MrJinje No. you could directly go and edit autounattended.xml if you typed your a wrong key. Regards

@SwedenXP As I said before there is a program called Windows Updates Downloader (WUD). In windows 7, I think you need to use the Windows update feature that comes with 7 like the one in Vista. There isn't any site similar to the XP one. Regards

@SwedenXP You're most welcome. I did not understand your question completely. Anyways, Here is my answer from what I understood . There is a program called windows updates downloader WUD. It downloads all the updates from the beginning to the latest for the system you choose. If you mean that 7Customizer should have a list of updates that you could download and integrate directly, I think that is out of scope of 7Customizer. Since they are different updates for different architectures, systems, importance .. etc. Regards

@x-layer No your source is fine. This is still a bug in 7Customizer. Anyway could you post your imagesinfo.xml and could you try 0.2.1 because I think the problem is solved now. Thanks for the feedback @SwedenXP Try 0.2.1. The problem is solved now. Thanks for the feedback @jbm I think you still did not get my point. When you check skip creating user, the screen for creating user in the installation will be skipped and it will autologon with the user name and password you provided in the unattended part. It the skip user is not checked the installation will ask you for a user name and password. And yes you need to check skip user to enter a user name. @pedilover Glad it worked for you. Thanks for the feedback.

I think you want to point to that in the unattended part there is no section for creating users. Yes you can not create users in the unattended part, you can skip user creation to make the auto log on feature work. Maybe later I could implement a part for creating users. Regards

@mirecek1965 You're welcome @x-layer I think this is a bug. I will resolve it in the next release. I recommend that you work with an AIO windows 7, though. I do not think that is necessary. @franner I do no think that is necessary anymore because I already fix that issue. @jamesbebby Thanks man for the feedback @TheWalrus Thanks man for the suggestions. The first one will have to wait until a future release. I will try to implement the second one in the next release. @karlitos I think you need to make a new thread regarding your issue because this thread is only for 7Customizer and not for troubleshooting WAIK. @shortie I think this is the same bug that x-layer found. Wait for the next release. @wazer Thanks man for the link. It is funny that I always recommend people to backup their files while I do not. Anyway thanks for the links. @mirecek1965 I will look into that and will report back shortly Regards

@dridzz Thanks for the link. @clavicle Thanks for the feedback Regards

I agree. As I said in a future release I will try to resolve this issue. @maxXPsoft I think I already implemented that in 7Customizer but it is still not working. Regards

@tcntad 7Customizer integrates the languages only. You can change the language after you finish the installation. It can be done that the user could choose the language of the installation part but I think it will needs some work which I think I need to concentrate in adding new features rather than putting effort in such minor stuff. Maybe later I could take a look at this iddue. @pedilover Glad it worked for you and thanks for the feedback @franner Thanks for the suggestion. A to do list is a nice thing. I will put it on the first thread. Regards

@tcntad I hope it works for you. thanks for your help @maxXPsoft Thanks man for the advice. I will download virtualbox and give it a try Regards

I hope it works for you. I tried to install the 64bit version in VMware but it failed (VMWare problem). I think I need to install a newer vmware version or VirtualBox perhaps. @burn Thanks man for your help and testing I really appreciate it. Regards

@burn Glad it worked for you and thanks for the feedback. It integrates the language successfully but I do not know why it does not make it the default one after the installation. So basically you need to choose the language that you prefer after the installation is complete. I will try to find out if I could make it the default one. Thanks man for the feedback Regards

@pedilover from your log the tool is trying to create the file in F:\Autounattend.xml which I think it is your dvd drive right? Here is my suggestion. Copy your sources again to a new folder. start 7Customizer and try again. If it did not work post your log and I will resolve this issue. From your log you are using win7 x64 ,then you should use imagex and dism that are located in amd64bit folder Regards

@tcntad No you can't. This will convert exe files that have the same structure as cab file like the language pack. Thanks man for the feedback and now I have an amd64 win7 so I will test integrating chinese LP. With your feedback and my testing, we will be sure if there are problems or not. @burn I have corrected the problem and will upload the new release in a moment. Thanks for the feedback @pedilover Did you copy your win7 source to your drive? Or using the DVD drive directly? No. I don't want to be the next Nuhi. I am different than him. You could say (I hope I will be as successful as him) that would be better. Thanks for the feedback man Regards

@urie Thanks for the feedback. I have corrected the error and I will upload the new release.