blackwingcat
Content Type
Profiles
Forums
Events
Posts posted by blackwingcat
-
-
On 9/7/2017 at 10:05 PM, Tommy said:
My duelview thread merged into this one
It is not working! This isn't even something I'm new at because I've been using dual monitors since the turn of the decade. However, with my new machine, no matter how much I play around with it, I cannot get dualview working.
So, my old card was a NVidia GeForce 8600GT dual DVI output, my new card is a NVidia GeForce 9800GT with dual DVI output as well. Whether it makes a difference or not, it's the energy efficient version so it doesn't require extra power to run. Now here's where things get very interesting. I can clone my desktop so both monitors show the same thing, I can also do horizontal/vertical view which doubles the resolution. But I cannot get dualview to have two independent monitors working. The video card recognizes two monitors are there, it knows that for a fact. But when I go to the display properties, even though it says multiple monitors, it only shows the one and extend my desktop is grayed out.
The things I've tried were basically changing driver versions which I've used both Tomasz86's 270.61 driver, no luck. I've tried a few of Blackwingcat's drivers, no luck either. I've even tried removing all the drivers via safe mode and removing the device all together and even running my registry cleaner to remove old entries, makes no difference. The only thing I can think of that might be fouled is the NVidia GeForce 8400GS that I originally had in there, it had DVI/VGA and HDMI, and apparently you cannot dualview a digital and analog connection, it's either one or the other. The other resources I looked for online on this issue is about as helpful as going out in the rain and covering your head with a spaghetti strainer. No real insight is offered. But with Dual DVI, I'm sure dualview should work. Am I to the point I might just have to reinstall Windows or what? I'm pulling my hair out because I've never had this much trouble getting it going before. Usually all I'd have to do is go through the control panel, enable dualview, restart at the prompt, and when Windows returned it would install the Dualview driver (which this doesn't), restart again, and then I could extend my desktop. So why this isn't happen with this, I have no clue. Now I'm turning to the ones who know even more than I do.
I tried to use the Dual Display with Display Link 5.1 driver and Extended Core v 1.6.
It seems to work fine ... : (
Ummm ... Is there any more informations ?0 -
On 6/23/2020 at 2:30 AM, Cixert said:
Yes, I am administrator.
I have tried with several computers on Windows 2000 and Windows XP in Spanish. On Windows 2000 with administrator and on Windows XP with personal user account with administrator permissions.Did you solve the problem "Entry point not found swprintf_s on msvcrt.dll" ?
It seems to require Extended kernel [Vista version msvcrt ].
the WLU update can work WHS 5.7.
If you want to uninstall WHS
- run cmd.exe
- cd to system32
- ternminate explorer.exe with task manager
- del the following files
cscript.exe
wscrupt.exe
dispex.dll
jscript.dll
scrobj.dll
scrrun.dll
vbscript.dll
wshcon.dll
wshext.dll0 -
On 6/7/2020 at 1:43 PM, Cixert said:
A message comes out, a message pops up asking for the user.
But then nothing happens. I have tried on w2000 and XP with the same result.
So I have manually installed on both systems Windows Scripts Host 5.8 for Windows 2000-XP (english) (2020-05) WindowsLU-Script58-v6-x86-int.wlu and now on both systems I have 2 errors when trying to execute files with .WLU extension
"Script engine not found on wlupdate.vbe"
Entry point not found swprintf_s on msvcrt.dll
I don't know if this error is possible because Windows Scripts Host 5.8 is in English and my system is in Spanish.
Can this have other consequences?
Is it possible to reverse the process of installing Windows Scripts Host 5.8?On XP I have uninstalled Windows Scrip Host 5.8 in "add or remove programs" and the problem has been solved.
On Windows 2000 I have reset the registry, installed Windows Scripts Host 5.7, reinstalled SP4 & UR1v.2, reinstalled IE6SP1 but the error still appears.
On windows 2000 I can`t uninstall WHS because the programs list in "add or remove programs"
has stopped loading. The list is empty and blank. Nothing appears. Neither WHS nor any other program.How can I manually uninstall WSH on w2000?
or how can I retrieve programs list in add or remove programs?
Edit:
I have uninstalled Windows Scrip Host on Windows 2000
https://support.microsoft.com/es-es/help/247515/program-is-not-listed-in-add-remove-programs-after-installationRegedit
Go to:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Uninstall
And find the program to uninstall
The path to uninstall is in UninstallstringPath to Uninstall Windows Script Host
C: \ WINNT \ $ NtUninstallscripten $ \ spuninst \ spuninst.exeBut although I have uninstalled it, the same error messages continue on Windows 2000 when trying to execute .WLU with wlupdate.vbe and the programs list in "add or remove programs" continues without being visible.
I installed IE 6.0 SP1 full version and now the error messages no longer appear and "add or remove programs" works again
It seems that "add or remove programs" depends on Windows Script Host.
.WLU drag & drop with "wlupdate.vbe" returns as before. This asks for a user and then nothing else happens.Hi.
WLUpdate requires administrator.
Is your account user ?
0 -
On 5/19/2020 at 2:03 AM, win32 said:
Yes. That one probably lacks the UMDF components.
Windows 2000 does not support UMDF by kernel base level , so I removed it from WMP11 for Win2000 package.
0 -
13 hours ago, JosefReisinger said:
Can you give advice how to solve the sceen sharing? Sorry for my impatience!
Greetings
I want to know why tp.dll crashes on WIndows 2000. :3
0 -
On 4/27/2020 at 4:32 AM, JosefReisinger said:
I tried to run zoom actual xp version with tp.dll 3.5.53922.620. It is not possible because of missing depends ?new_instance@socket_ctx_t@ssb@@SAPAV12@PCIIPAVmsg_db_t@2@@Z in old tp.dll.
Greetings Joe
Yeah, it is not compatible.
0 -
On 4/24/2020 at 5:14 AM, JosefReisinger said:
@blackwingcat: did you get my email??
Greetings
Sorry, I missed your email for a long time.
Zoom version 3.5.71665.0713 and later are crashed cause of tp.dll
1 -
On 3/4/2020 at 2:31 AM, bluesteel649 said:
Unfortunately that correction didn't yield any positive results on my end. I realized I was using an outdated version of the drivers from BWC and got a much more recent release (Intel Rapid Storage Manager 8.9g for Windows 2000 + Extended Core(Intel 300 Series 蟇ｾ蠢� - also attached). Compiling the cab file's contents as a disk image yields an "iastor.sys is corrupted error" and there is still no mention of DEV_3B2E but there are pre-existing entries for the 5/3400 series; it's no golden bullet but I think it's a much better point to search for a solution from.
Hopefully when I work out why I'm getting the corrupted .sys file error, I might have a bit less of a time working all this out...
8.9 driver requires Extended kernel core :3
0 -
On 3/4/2020 at 1:40 AM, win32 said:
I noticed a possible error in your iaAHCI.inf. Change
; 3400 %PCI\VEN_8086&DEV_3B2E&CC_0101.DeviceDesc% = "Intel(R) 3400 SATA AHCI Controller 4 port"
to
; 3400 %PCI\VEN_8086&DEV_3B2E&CC_0101.DeviceDesc% = iaStor_Inst, PCI\VEN_8086&DEV_3B2E&CC_0101
I think PCI\VEN_8086&DEV_XXXE means it works on IDE mode. :3
and CC_01 means storage class.
CC_0100 SCSI
CC_0101 IDE
CC_0104 RAID
CC_0105 ATA
CC_0106 SATA
CC_0107 SAS
CC_0108 NVM
1 -
I use Canon PIXUS MG6330
Network driver would not work but , USB driver work on Windows 2000 :3
0 -
1
-
-
On 11/28/2019 at 5:15 AM, piotrhn said:
shell32 please add 1 function from XP. its very esy to implement SHCreateLocalServerRunDllSHCreateLocalServerRunDll.txt
It references the following DCOM services.
{FFB8655F-81B9-4fce-B89C-9A6BA76D13E7}
{601AC3DC-786A-4EB0-BF40-EE3521E70BFB}
{995C996E-D918-4a8c-A302-45719A6F4EA7}
so it is difficult to implement.
0 -
On 12/17/2019 at 10:43 AM, win32 said:
Even with NNN4NT5 you were unable to run to successfully run the installer? They are packaged as MSIs, they can also be edited with Orca by dropping the "LaunchCondition" table.
If we execute msiexec.exe with XP Compatible mode option, it may require "Windows2000-KB971913-v3a-x86-INTL.exe"
official Windows Installer v3.1 sometimes stops on XP Compatible mode.
0 -
On 1/3/2020 at 2:31 AM, WinFX said:
When installing a version of the previous driver that did not require this, it worked correctly.
But if I install the newest version that works on Ivy Bridge and Sandy Bride (requires extended core), it simply doesn't work on Windows 2000 even with the extended Core on v10 and v16d versions and none were successful, but on XP they worked.Then check that the problem came from hal.dll which was missing some instructions, as if it were that hal.dll on system32 when installing the extended core was not updated, but when doing it with the hal.dll of the extracted folder of the extended core there are no problems, does anyone know why this fault is due?
Another thing that happens to me is that when replacing the old hal.dll with the extended core (of course with the extended core installed), Windows 2000 does not start and restarts indefinitely.
You need to learn how to work HAL.DLL in Windows NT 5.x.
When HAL is installed , it will be renamed to hal.dll the following.
ACPI MPU = Halmacpi.dll
ACPI UPU = Halaacpi.dll
ACPI PC = Halacpi.dll
MPS MPS PC = Halmps.dll
MPS UPS PC = Halapic.dll
standard PC = Hal.dll
you can find original filename from hal.dll in file property.
1 -
On 12/20/2019 at 2:39 AM, Sampei.Nihira said:
It was fake news :3
I analyzed it, he uses Windows 7.
http://blog.livedoor.jp/blackwingcat/archives/1992632.html
5 -
1 hour ago, WinFX said:
I decided to install NET Framework 4.5 through the msi netfx_Full_x86, but I got an error that I had to run from setup.exe, but then I edited that with Orca MSI, a Windows Presentation Foundation Font Cache v4.0 error, someone knows that I have to do about it?
Screenshot: https://drive.google.com/open?id=1QSu7HpgjVomrb_-WJd-kubzf6W2txtxL
http://blog.livedoor.jp/blackwingcat/archives/1707555.html
If you have installed it , it would not work .
1 -
On 12/3/2019 at 6:41 AM, win32 said:
Were you actually able to run the unpacker under win2k? I couldn't and had to do it in XP.
But yes, this version cuts out most if not all of the Chinese telemetry, as confirmed by kerio not bombarding me with connection requests.
I still can't get uBlock Origin to install though (in win2k). But uMatrix does work better than it did about seven months ago.
Unfortunately youtube doesn't work very well, as it shows me nothing but blank video thumbnails, which appears to be the fault of uMatrix. If only google ads didn't have crypto mining routines and redirects galore...
SetThreadDescription and DiscardVirtualMemory are key missing APIs in kernel32.dll.
I have not tried to run unpacker on Windows 2000 yet.
I extract it on Windows 10 and create translated Japanese version.
Japanese version packed with cab.
And it works on Win2000.
0 -
360ee v11.0.2251 was released.
I recommend not to install official version but Repack & Portable version.
https://lrepacks.ru/repaki-programm-dlya-interneta/182-360-extreme-explorer-amp-portable.html
4 -
6 hours ago, piotrhn said:
shell32 please add 1 function from XP. its very esy to implement SHCreateLocalServerRunDllSHCreateLocalServerRunDll.txt
What application does use it ? :3
0 -
On 11/22/2019 at 7:42 AM, WinFX said:
Yes, is that error, do you have any solution?
It seems to have some hardware problem.
Or, Windows lost your install media
* Loading TXT OEM Drivers (ex SATA Driver for DVD-ROM)
* Windows load inf Drivers ( if your Windows install media does not have driver , Windows lost it ) :3
0 -
On 11/23/2019 at 6:38 AM, caliber said:
How to install this patch on XP ?
XP needs some Vista kernel32 functions.
And if you install it on XP, .Net Framework 4.0 will be broken.
1 -
On 11/8/2019 at 8:23 AM, win32 said:
I installed 12.0.1202, which is a pre-release of 360 Extreme Explorer 12, based on Chromium 78. It can be obtained here: http://www.qiuquan.cc/browser/360chrome.html (behind some other stuff and semi-broken classic captchas)
I installed it on Windows 2000 and XP. However it is quite broken as the first few attempts to use ended in freezes; now it is more stable. However it tries to use IE6 to render everything on Windows 2000; as IE6 is blocked in my firewall that went nowhere quick. XP is being a pill on my T60 so haven't tested as much there, but it was able to load the post-install page without apparently relying on IE.
There is no indication that XP has been dropped so hopefully they will continue refining the product in time for its final release!
Two other notes:
-I had to rename the installer because my English NT5.x installations had a hard time with the Chinese characters and kept telling me "file not found". XP went into a classic GDI+ resource shortage fit and required a logoff when I tried renaming it there.
-I had to copy the EN-US locale file from my v11 install to get v12 to start. However everything is still displayed in Chinese.
360ee v 12.0.1006.0 beta is used "CreateThreadpoolWork", so it crashes at once :3
0 -
On 11/22/2019 at 9:56 PM, JosefReisinger said:
@blackwingcat "Microsoft and the codepage": This is Windows 10 german with exact the same error like w2k, xp and win 7: with ttf font lucida console ">" is displayed "1>" ::-(
No error with ä ö ü any longer.
Greetings Joe
Batch file get's a random “1” added before the output command.
I found it :3
0
I can not find a driver for wifi for windows 2000
in Windows 2000/2003/NT4
Posted
I think Intel Centrino requires WiFi Application.
But Windows 2000 is not supported native WiFi apps.
So, I think , Windows 2000 user not should choose Intel WiFi card.