larciel

found problem, I removed folders 2-4 inside 'I' (intel graphic) I put those back in the DP and problem goes away, but do you have any idea why 855GM would require other intel graphic drivers?

and what's difference btw calling WPI through WPI.cmd and WPI.hta ? I looked at WPI.cmd and also saw "UNDO.reg" file inside 'common' folder. the UNDO.reg file doesn't have any code inside . is this normal? *using lite 1.2

Got BSOD with latest DP_graphic A (I took out gf 7800 Go folder (G/N/2) ) it wouldn't matter in this case right? HWID for the gf4 460 I'm having problem is below PCI\VEN_10DE&DEV_0177&SUBSYS_00011179&REV_A3\4&2EEAE0A0&0&0008: Video Controller (VGA Compatible) Toshiba model 5205-s505 thanks again

one more Q. is it normal that WPI is called 'twice' when ran with runonceex.cmd ? here's my code and picture for help FOR %%i IN (D E F G H I J K L M N O P Q R S T U V W X Y Z) DO IF EXIST %%i:\WIN51 SET CDROM=%%i: SET KEY=HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx REG ADD %KEY% /V TITLE /D "Installing Applications" /f REG ADD %KEY%\001 /VE /D "First step" /f REG ADD %KEY%\001 /V 1 /D "%systemdrive%\none1.bat" /f REG ADD %KEY%\002 /VE /D "calling WPI" /f REG ADD %KEY%\002 /V 1 /D "%systemdrive%\wpi\wpi.hta" /f

ok, very weird problem . I'm using ryan's 2.04 UP. along with your DP. on Intel centrino notebook (tested with 3 of them) I get black screen on first 'logon' (after all the setup is finished) I've toggled with this problem for a day now. so far i've tried 1. 2.04 with all latest DP ---- error 2. 2.04 with latest DP and OLD intel 855gm driver (from 6.02) ---- ---- error 3. 2.03 with 6.02 GP_B driverpack --- works 4. 2.04 without DP_G --- works on #4, I could get the screen to show (of course driver is not installed), but if i try to install driver under Device Manger, it says setup cannot find files. !!!! I don't know if the problem exists only on my XP cd.. I'm using nlite to remove small parts .. I believe problem exists between 2.04 and intel's graphic.. if anyone have similar exp. plz share !

thanks for smack, i got it now

Hey kel, i just dl-ed 1.2 and just found out that codes in 'generate.js' file changed . I ran my uaxp cd with 1.2 on it and now WPI looks at C:\WPI when the parameter calls for %CDROM% . help me.. or smack me thanks always

you could possibly do it. but since there are some changes to code of the base, I recommend integrating again. (won't take long)

no mp3 support of winamp. i have samsung yp-7t but i'm not sure if it's supported.

this is off topic, but anyone have feedback on mp3 player support?

this is long dead thread, but after running this, when I run liveupdate, update does not install fully. I'll have to run it again and download FULL size definition (around 10MB) for it to work. anyone get same prb?

Yep my problem is posted in the old 5.10 thread. I'll patiently wait for the solution thanks always

is nf3 raid driver problem fixed in this ver bash? tia

Hi, thank you very much, this release reminds me of good old 2.xx ver one gripe is when I right click a folder, "play in winamp" option is not there, can you add this to your next ver if possible? thanks again

Hi bash, did you include GF2 GTS support in this ver.?

I got BSOD with current DP_GA with my asus Gf2 gts chip (yes it's old) I removed DP_GA from my cd and put in Asus driver from the cd video card came with and it installed fine HWID is PCI\VEN_10DE&DEV_0151&SUBSYS_40601043&REV_A4\4&1AD7642&0&0058: ASUS V7700 Ti SGRAM v14.62a the asus driver is dated 8/16/2001 !! thank you in advance bash.

I can't really pin point the exact cause for the problem, so I'm looking for help. tested with several system. video card installs fine with new windows setup, but after a while if I want to change to another video card, driver does not install. gives me error, or reboots right after attempting to install driver. (yes i uninstall current video card driver before installing new one) has been tested with gf6800, gf5500, matrox g450, gf quadro2 pro, anybody have same issue?

really, I'm confused and p***ed (at nvidia of course) i was able to install fine on my RAID 0 array (shuttle sn85 v3 NF3 chip) with DP_mass 5.10 and DP_base 6.011 I installed a new video card (nvidia 6800) and driver didn't install (parameter incorrect, it said) so I figured i'd just reformat comp with my XPcd with all the lastest DP. setup goes fine until the end where computer reboots over and over again . arggg (the same cd installed fine on same computer) i thought it was raid problem, but as i was writing this, I figured maybe it's because of nvidia graphic card? (last GPU was ATI) EDIT *Yes, it's right, I installed with no problem with XPCD that only had DP_mass 5.10

i just wanted to mention that I really appreciate your replies!. now on to the prob. the first picture shows that all nvraid related files are in subfolder and not i386 directly (thus, causing the missing nvraid.sys error) 'raidtools' in second picture is neglectant, as i just did not erase the folder before i integrated.. (having raidtools folder shouldn't matter anyway to this problem.) *do you have any idea why nvraid.sy_ is not copying to i386 folder? (yes it's setup as textmode)

the result meaning like the one in picture i uploaded. existance of "NLDRV" folder inside i386 is something that your guide did not mention. I just manually put NVRAID.sy_ file inside i386 folder and my computer reboots *just tried with the shuttle driver. same thing. dang..

have you tried to integrate nvidia 6.53 drv with rc6 ? can you check if you get same results as mine?

When I selected the nvraid.inf file inside the IDE\winxp folder of 6.53 driver nlite automatically selects it as TEXTMODE Drv. (yes the popup) it even asks me if I want to check out this page for more info. now, under the WINXP subfolder, there's another subfolder named 'raidtools' . do i need to copy those files out to 'ide\winxp' folder? or just leave it as it is?

I think, that you have done something wrong.If you follow my guide, you will find the driver NVRAID.SYS within that folder, which you take for the nForce SataRaid driver integration (LEGACY or SATARAID). nLite will copy all files into the driver folder OEMDIR and additionaly the drivers as copressed files (NVATABUS.SY_ and NVRAID.SY_) into the I386 folder. Have a look, if you find them there. CU Fernando Ok, since I was little vague on my setup, if i had given any, let me give you detail I have shuttle sn85g4v3 (nforce3) . i checked RAID BIOS ver, and it is 4.34 (latest BIOS from shuttle site) so I followed your guide and downloaded 6.53 nforce driver, I used nlite 1.0 RC6 to integrate the nvraid (which is within IDE\WINXP folder) , and selected both SATA and RAID like the tutorial said. nlite successfully completed its job. now I have "NLDRV" folder inside my i386 folder . and all the compressed nvraid drivers are inside that folder, but not a single nvraid related files are inside i386 directly. I have tried to integrate nvraid long time ago (with nlite .98 i think) and the result was pretty much same as what i have right now. so either I must've missed step, or something's wrong.. I read your guide three times and this was the correct step ( at least for me, who is w/ BIOS 4.34) thanks in adv

I read all of first page, and it seems that the method does not differ from any driver integration (at least for BIOS ver 4.84 or less) I followed your setup and I get "could not find nvraid.sys" in setup mode. I know putting nvraid.sys file in i386 folder fixes this problem, but would like to know if you misses a step in the first page . thanks for great info

you're speaking my language here, so I can't help directly but i'll keep cheering on for ya. big thanks from a nf3 raid user.