soporific Posted March 12, 2007 Author Share Posted March 12, 2007 v0.54 - 13th March, 2007 - added localization support - changed RAM value code - no more adding 1 to get the correct value - should be right now. Link to comment Share on other sites More sharing options...
Drugwash Posted March 12, 2007 Share Posted March 12, 2007 Nothing changed, except for the amount of detected memory, which is now 0mb instead of the previous 1mb. Oh and minor tweaks to the displayed options. Link to comment Share on other sites More sharing options...
Max_04 Posted March 12, 2007 Share Posted March 12, 2007 (edited) @ soporific:In system.bmp aren't localized following strings:1) Load settings2) Install3) of (near 8192)Please add localization also for these strings.http://www.divshare.com/download/219577-1a7In system2.bmp there is an error during checking ram.ASET: Warning: syntax error!http://www.divshare.com/download/219578-cc0In each case, this is italian localization that I've done::ITALIANSET TexVe=Verifica che il programma identifichi correttamente quanta RAM haiSET TexAf=MB installati sul computerSET TexMa=imposta manualmenteSET Tex01=versioneSET Tex02=Benvenuto all'installatore dei trucchi del SYSTEM.INI by SoporificSET Tex03=Ottimizzera' il file SYSTEM.INI a vantaggio del tuo hardware modernoSET Tex04=L'installatore registrera' le tue impostazioni correntiSET Tex05=e le salvera' in un file undo che puoi usareSET Tex06=per recuperare le impostazioni originarie se occorreSET Tex07=Le impostazioni che puoi cambiare sonoSET Tex08=Premi un tasto per continuareSET Tex08a=oSET Tex08b=per uscireSET Tex09=Sto creando il tuo file undo originaleSET Tex10=Sto caricando le impostazioni correnti del tuo computerSET Tex11=Sto caricando le impostazioni salvateSET Tex12=Scegli un numero per cambiare ogni impostazioneSET Tex13=Automaticamente carica le migliori impostazioni usando il valore RAMSET Tex14=computer correnteSET Tex15=impostazioni di default per Win98SET Tex16=alteSET Tex17=estremeSET Tex17a=prestazioniSET Tex18=ultimoSET Tex18a=file undoSET Tex18b=riavviaSET Tex19=originaleSET Tex20=salva impostazioniSET Tex20a=creaSET Tex20b=installa trucchiSET Tex21=visualizza informazioni su tutte le impostazioniSET Tex22=Esci dal programmaSET Tex23=Spazio usatoSET Tex24=Sembra che tu non abbia ancora visto cheSET Tex25=questo programma identifica correttamenteSET Tex26=il valore di RAM installatoSET Tex27=sul tuo sistemaSET Tex28=Premi un tasto per fare questo adessoSET Tex29=Sto controllando per vedere quanta RAM haiSET Tex30=Questo programma pensa che haiSET Tex31=di RAM disponibile su WindowsSET Tex32=Puoi confermarlo andando suSET Tex33=Start - Programmi - Pannello di controllo - SistemaSET Tex34=SET Tex35=Se questo non e' corretto puoi inserireSET Tex36=manualmente il valore corretto in modo cheSET Tex37=il programma avra' le impostazioniSET Tex38=appropriate per il tuo computerSET Tex39=E' questo il valore correttoSET Tex40=Per questo esiste un'opzione per settare manualmente le dimensioni della RAMSET Tex41=Inserisci la tua RAM in megabyteSET Tex42=Non puoi inserire niente per questa impostazione. Inserisci qualcosaSET Tex43=Le tue dimensioni RAM diSET Tex44=sono state registrate e saranno usate in tutti iSET Tex45=calcoli che usano le dimensioni della RAM.SET Tex46=Se commetti uno sbaglio, fai partire di nuovo questa opzione.SET Tex47=Questo installera' il tuo file undo originaleSET Tex48=Stai per fare cambiamenti al tuo file SYSTEM.INISET Tex49=Sicuro di voler continuareSET Tex50=Il tuo file undo originale e' stato installatoSET Tex51a=Questo installera'SET Tex51=il tuo fileSET Tex52a=undo correnteSET Tex52=Sto creando il tuo file originaleSET Tex53a=Sto caricandoSET Tex53=le impostazioni correnti del computerSET Tex54=impostazioni salvateSET Tex55=Scegli un numero per cambiare ogni impostazioneSET Tex56=e' stato installatoSET Tex57=il file di informazione per le impostazioni di SYSTEM.INISET Tex58=impostazioni da questo computerSET Tex59=Sei sicuroSET Tex60=Per favore notaSET Tex61=Questo installera' i trucchi selezionatiSET Tex62=Se il sistema rifiuta di caricarsi al riavvioSET Tex63=riavvia in MODALITA' PROVVISORIA ed esegui il file undoSET Tex64=Se non sai che puoi riavviare in MODALITA' PROVVISORIASET Tex65=controlla prima!!! Oltre questo, non ci sono impostazioniSET Tex66=che puoi effettuare che fermeranno l'avvio del computerSET Tex67=Continua installando i trucchiSET Tex68=per continuareSET Tex69=per tornare indietroSET Tex70=Le impostazioni sono state salvateSET Tex71=Il file undo e' stato creatoSET Tex72=Il file INF e' stato creatoSET Tex73=Sto installando i trucchiSET Tex74=i trucchi sono stati installatiSET Tex75=Nome impostazioneSET Tex76=Valori validiSET Tex77=raccomandatoSET Tex78=Informazione:: ie Press: 0 for OFFSET Tex79=PremiSET Tex80=perSET Tex81=Impostazioni raccomandateSET Tex82=per cancellare questa impostazione interamenteSET Tex83=per tornare indietroSET Tex84=l'impostazione default e'SET Tex85=disabilitaSET Tex86=per configurare automaticamente questa impostazione basata sulla RAMSET Tex86a=per scegliere automaticamente l'impostazione miglioreSET Tex87a=Hai menoSET Tex87=diSET Tex88=di RAM installataSET Tex89=Significa che e' raccomandato impostarla:: SET Tex90=SET Tex91=o piu'SET Tex92=Non inserire nienteSET Tex93=Inserisci il nuovoSET Tex94=dimensioni bufferSET Tex95=Questo valore non e' validoSET Tex96=Inserisci un valore traSET Tex97=eSET Tex98=il valoreSET Tex99=di defaultSET TexRe=Riavvia oraSET Tey00=per inserire la cifra manualmenteSET Tey01=Visto che la tua RAM e'SET Tey02=l'impostazione e'SET Tey03=Meglio configurarlo aSET Tey04=Usare una guida diSET Tey05=Questo abilita l'accesso a 32 bit per il tuo hard diskSET Tey06=Il computer partira' con prestazioni ridotte con l'opz. disabilitaSET Tey07=Disabilitare e' inutile per la risoluzione problemiSET Tey08=Questo forza il sistema per usare quanto piu' possibileSET Tey09=la memoria fisica, prima di usare l'hard diskSET Tey10=Raccomandato per computer con 256mb di RAM o oltreSET Tey11=Interessa le comunicazioni con periferiche incluseSET Tey12=schede audio FM/wavetable, playback-registrazione MIDISET Tey13=e disco di lettura-scritturaSET Tey14=Specifica i secondi che si esegue un applicazione conSET Tey15=priorita' incrementata quando riceve una battitura. Rende laSET Tey16=tastiera piu' pronta quando si eseguono applicazioni multiple.SET Tey17=Imposta il tempo minimo in cui ogni processo haSET Tey18=accesso alla CPU. Valori bassi migliorano il multi-taskingSET Tey19=ma diminuisce le prestazioni generali e viceversa.SET Tey20=Per attivare il supporto ai removibiliSET Tey20a=drive:: like as in "turn on support for removable drives like Iomega, Syquest, etc"SET Tey21=per esempioSET Tey22=dipende dalla RAMSET Tey23=Specifica dimensioni di ogni blocco del buffer di memoria in byteSET Tey24=Usa chunk grandi se hai molta RAMSET Tey24a=ma troppo grande funzionera' a dispetto dell'efficienzaSET Tey25=E' una buona idea usare valori che sono multipli di:: min as in minimumSET Tey26=min:: max as in maximumSET Tey27=maxSET Tey28=Vcache is the Windows disk-caching virtual device driverSET Tey29=Fornisce prestazioni del disco eccellenti, per non usarne altri.SET Tey30=es SmartDrv, ecc...SET Tey31=Eccellente Edited March 12, 2007 by Max_04 Link to comment Share on other sites More sharing options...
RainyShadow Posted March 12, 2007 Share Posted March 12, 2007 It's about time i made my DOS programs 4DOS compatible. Is there some information i can see that will see where i can work around incompatibilities? Can you send me anything? you can get my email via my profile...What information do you need ?Just ask and i'll try to answer as good as i can.btw. I've looked a bit in your code and found a few flaws.The Install.bat script assumes default short (8.3) filenames, but these aren't always reliable.What if (just an example) i have a file named AutoSystemBackup.pif on my desktop? Its short name would be the same you use to run your app after install. And yours would be named Autosy~2.pif instead.Some of the values your scripts look for:c:\tools\4dos>VER4DOS 7,50 (Win98) DOS 7,10c:\tools\4dos>memMemory Type Total Used Free---------------- -------- -------- --------Conventional 640K 71K 569KUpper 43K 23K 20KReserved 0K 0K 0KExtended (XMS) 65 429K ? 522 244K---------------- -------- -------- --------Total memory 66 112K ? 522 833KTotal under 1 MB 683K 93K 589KTotal Expanded (EMS) 64M (67 108 864 bytes)Free Expanded (EMS) 16M (16 777 216 bytes)Largest executable program size 569K (583 120 bytes)Largest free upper memory block 10K (10 416 bytes)MS-DOS is resident in the high memory area.c:\program files\autosys>bin\FREEMEM.exeMemory Type Total Used Free---------------- -------- -------- --------Conventional 640K 71K 569KUpper 43K 23K 20KReserved 341K 341K 0KExtended (XMS) 523 200K 956K 522 244K---------------- -------- -------- --------Total memory 524 224K 1 391K 522 833KTotal under 1 MB 683K 94K 589KTotal Expanded (EMS) 64M (67 108 864 bytes)Free Expanded (EMS) 16M (16 777 216 bytes)Largest executable program size 569K (583 104 bytes)Largest free upper memory block 10K ( 10 416 bytes)Windows is resident in the high memory area.Incorrect (for 4DOS) usage of IFc:\program files\autosys>Start_Me.bat LOCATE is: "C:\Progra~1\AutoSYS" COMSPEC is: C:\TOOLS\4DOS\4DOS.COMPress any key when ready...C:\Progra~1\AutoSYS\code\SYS_Inst.bat [6] Usage : IF [NOT] condition ... This was only tested with Windows 98 second edition. You should only use this for Win9x or WinMe machines but you can choose to ignore this warning, if you must. Exit now? [Y/N]Also you might want to specify in the :NOTWINMS message that the scripts need M$ Command.com as a shell.A typo::NOUNDOecho.echo. It seems you haven't yet made an unfo file.You'll find an output log and an 4DOS log in the attachment.I used to get the same ASET error as Max_04 on the first tries. I'm not sure if it got somehow fixed when i ran the scripts from the command line or just the message was hidden.log.txtlog1.txt Link to comment Share on other sites More sharing options...
Drugwash Posted March 12, 2007 Share Posted March 12, 2007 (edited) Please look at this piece of code, for RAM detection routine; note that on certain systems with regional settings different than English, separators are swapped - meaning comma is period and period is comma. This code has them switched, which works on my system and it detects the 240MB of RAM I have. We already had this issue in another one of your projects - UBCD, IIRCAlso note that FREEMEM delivers the result in kB, while MEM delivers it in bytes, so there's no need for three separators detection, but only two of them, while using FREEMEM::GET_RAM:: this function tries to calculate how much RAM you have installed:: returns with %NEXT1%:: first see if there is a manual RAM size fileIF EXIST "%LOCATE%\files\your_RAM.txt" goto MAN_RAMSET MyFile=C:\@@_tmp.txt:: see if there are 3 commas, which need to be periods on certain systems"%LOCATE%\bin\FREEMEM" | Find /i "%memmsg%" > "%MyFile%""%LOCATE%\bin\NSET" /P18,1 X=$0 < "%MyFile%""%LOCATE%\bin\NSET" /P22,1 Y=$0 < "%MyFile%":: "%LOCATE%\bin\NSET" /P26,1 Z=$0 < "%MyFile%"::IF %X%!==.! IF %Y%!==.! IF %Z%!==.! goto GET_OV1GIF %X%!==.! IF %Y%!==.! goto GET_OV1G"%LOCATE%\bin\NSET" /P18 TempVar=$1 < "%MyFile%"goto GET_UN1G:GET_OV1G"%LOCATE%\bin\NSET" /P18 TempVar=$1$2 < "%MyFile%":GET_UN1G"%LOCATE%\bin\ASET" TempVar := SUBALL('K','','%TempVar%')"%LOCATE%\bin\ASET" TempVar := SUBALL('.','','%TempVar%')"%LOCATE%\bin\ASET" TempVar := SUBALL(' ','','%TempVar%')"%LOCATE%\bin\ASET" MyRAM := %TempVar%/1024"%LOCATE%\bin\ASET" MyRAM := ROUND(%MyRAM%):: we have to add 1 to the number, why i don't know.:: "%LOCATE%\bin\ASET" MyRAM := %MyRAM%+1"%LOCATE%\bin\ASET" MinVal := %MyRAM%*128"%LOCATE%\bin\ASET" MaxVal := %MyRAM%*256 Edited March 12, 2007 by Drugwash Link to comment Share on other sites More sharing options...
soporific Posted March 13, 2007 Author Share Posted March 13, 2007 (edited) I will end up replying to everyone's post ...1) can people post what happens when you type FREEMEM at the command line. (like RainyShadow did) -- To do this without a screenshot: type FREEMEM > [your file] (eg FREEMEM > c:\tmp.txt)and just post the text file .... this will tell me the various variables i use in 2 of my DOS programs. Thanks for everyone's posts on this ... Edited March 13, 2007 by soporific Link to comment Share on other sites More sharing options...
Drugwash Posted March 13, 2007 Share Posted March 13, 2007 Here's mine:Memory Type Total Used Free---------------- -------- -------- --------Conventional 640K 60K 580KUpper 0K 0K 0KReserved 384K 384K 0KExtended (XMS) 244.672K 192K 244.480K---------------- -------- -------- --------Total memory 245.696K 636K 245.060KTotal under 1 MB 640K 60K 580KLargest executable program size 580K (594.240 bytes)Windows is resident in the high memory area. Link to comment Share on other sites More sharing options...
soporific Posted March 13, 2007 Author Share Posted March 13, 2007 (edited) @ soporific:Please add localization also for these strings.:ITALIANHey Max_04, thanks for all that, it's been added ...here's those two strings i left out ... going over it all, i can see where i could have saved a few strings ... i'll get better at this translation thing as i go along, promise ...SET Tey32=load settingsSET Tey33=installre: your errors, i'm a bit stumped, but i'm looking into it ...Thanks for that Drugwash, and thanks for your code tips. Edited March 13, 2007 by soporific Link to comment Share on other sites More sharing options...
Max_04 Posted March 13, 2007 Share Posted March 13, 2007 (edited) SET Tey32=load settingsSET Tey33=installIn italian:SET Tey32=caricaSET Tey33=installa Edited March 13, 2007 by Max_04 Link to comment Share on other sites More sharing options...
MDGx Posted March 13, 2007 Share Posted March 13, 2007 soporific:SYSTEM.INI "DirectoryCache" is an invalid entry = please see the SYS_INI.TXT inside the \INFO subdirectory.HTH Link to comment Share on other sites More sharing options...
soporific Posted March 14, 2007 Author Share Posted March 14, 2007 SYSTEM.INI "DirectoryCache" is an invalid entry = please see the SYS_INI.TXT inside the \INFO subdirectory.Thanks man.v0.55 - 15th March, 2007 - improved RAM value code - removed invalid setting from information file (thanks MDGx) Link to comment Share on other sites More sharing options...
Max_04 Posted March 16, 2007 Share Posted March 16, 2007 (edited) RAM value code doesn't work still.... for check, I've ? ram installed.... Why ? instead of a normal number?Ah, this is new italian text updated::ITALIANSET TexVe=Verifica che il programma identifichi correttamente quanta RAM haiSET TexAf=MB installati sul computerSET TexMa=imposta manualmenteSET Tex01=versioneSET Tex02=Benvenuto all'installatore dei trucchi del SYSTEM.INI by SoporificSET Tex03=Ottimizzera' il file SYSTEM.INI a vantaggio del tuo hardware modernoSET Tex04=L'installatore registrera' le tue impostazioni correntiSET Tex05=e le salvera' in un file undo che puoi usareSET Tex06=per recuperare le impostazioni originarie se occorreSET Tex07=Le impostazioni che puoi cambiare sonoSET Tex08=Premi un tasto per continuareSET Tex08a=oSET Tex08b=per uscireSET Tex09=Sto creando il tuo file undo originaleSET Tex10=Sto caricando le impostazioni correnti del tuo computerSET Tex11=Sto caricando le impostazioni salvateSET Tex12=Scegli un numero per cambiare ogni impostazioneSET Tex13=Automaticamente carica le migliori impostazioni usando il valore RAMSET Tex14=computer correnteSET Tex15=impostazioni di default per Win98SET Tex16=alteSET Tex17=estremeSET Tex17a=prestazioniSET Tex18=ultimoSET Tex18a=file undoSET Tex18b=riavviaSET Tex19=originaleSET Tex20=salva impostazioniSET Tex20a=creaSET Tex20b=installa trucchiSET Tex21=visualizza informazioni su tutte le impostazioniSET Tex22=Esci dal programmaSET Tex23=Spazio usatoSET Tex24=Sembra che tu non abbia ancora visto cheSET Tex25=questo programma identifica correttamenteSET Tex26=il valore di RAM installatoSET Tex27=sul tuo sistemaSET Tex28=Premi un tasto per fare questo adessoSET Tex29=Sto controllando per vedere quanta RAM haiSET Tex30=Questo programma pensa che haiSET Tex31=di RAM disponibile su WindowsSET Tex32=Puoi confermarlo andando suSET Tex33=Start - Programmi - Pannello di controllo - SistemaSET Tex34=SET Tex35=Se questo non e' corretto puoi inserireSET Tex36=manualmente il valore corretto in modo cheSET Tex37=il programma avra' le impostazioniSET Tex38=appropriate per il tuo computerSET Tex39=E' questo il valore correttoSET Tex40=Per questo esiste un'opzione per settare manualmente le dimensioni della RAMSET Tex41=Inserisci la tua RAM in megabyteSET Tex42=Non puoi inserire niente per questa impostazione. Inserisci qualcosaSET Tex43=Le tue dimensioni RAM diSET Tex44=sono state registrate e saranno usate in tutti iSET Tex45=calcoli che usano le dimensioni della RAM.SET Tex46=Se commetti uno sbaglio, fai partire di nuovo questa opzione.SET Tex47=Questo installera' il tuo file undo originaleSET Tex48=Stai per fare cambiamenti al tuo file SYSTEM.INISET Tex49=Sicuro di voler continuareSET Tex50=Il tuo file undo originale e' stato installatoSET Tex51a=Questo installera'SET Tex51=il tuo fileSET Tex52a=undo correnteSET Tex52=Sto creando il tuo file originaleSET Tex53a=Sto caricandoSET Tex53=le impostazioni correnti del computerSET Tex54=impostazioni salvateSET Tex55=Scegli un numero per cambiare ogni impostazioneSET Tex56=e' stato installatoSET Tex57=il file di informazione per le impostazioni di SYSTEM.INISET Tex58=impostazioni da questo computerSET Tex59=Sei sicuroSET Tex60=Per favore notaSET Tex61=Questo installera' i trucchi selezionatiSET Tex62=Se il sistema rifiuta di caricarsi al riavvioSET Tex63=riavvia in MODALITA' PROVVISORIA ed esegui il file undoSET Tex64=Se non sai che puoi riavviare in MODALITA' PROVVISORIASET Tex65=controlla prima!!! Oltre questo, non ci sono impostazioniSET Tex66=che puoi effettuare che fermeranno l'avvio del computerSET Tex67=Continua installando i trucchiSET Tex68=per continuareSET Tex69=per tornare indietroSET Tex70=Le impostazioni sono state salvateSET Tex71=Il file undo e' stato creatoSET Tex72=Il file INF e' stato creatoSET Tex73=Sto installando i trucchiSET Tex74=i trucchi sono stati installatiSET Tex75=Nome impostazioneSET Tex76=Valori validiSET Tex77=raccomandatoSET Tex78=Informazione:: ie Press: 0 for OFFSET Tex79=PremiSET Tex80=perSET Tex81=impostazioni raccomandateSET Tex82=per cancellare questa impostazione interamenteSET Tex83=per tornare indietroSET Tex84=l'impostazione default e'SET Tex85=disabilitaSET Tex86=per configurare in automatico questa impostazione basata sulla RAMSET Tex86a=per scegliere automaticamente l'impostazione miglioreSET Tex87a=Hai menoSET Tex87=diSET Tex88=di RAM installataSET Tex89=Significa che e' raccomandato impostarla:: SET Tex90=SET Tex91=o piu'SET Tex92=Non inserire nienteSET Tex93=Inserisci il nuovoSET Tex94=dimensioni bufferSET Tex95=Questo valore non e' validoSET Tex96=Inserisci un valore traSET Tex97=eSET Tex98=il valoreSET Tex99=di defaultSET TexRe=Riavvia oraSET Tey00=per inserire la cifra manualmenteSET Tey01=Visto che la tua RAM e'SET Tey02=l'impostazione e'SET Tey03=Meglio configurarlo aSET Tey04=Usare una guida diSET Tey05=Questo abilita l'accesso a 32 bit per il tuo hard diskSET Tey06=Il computer partira' con prestazioni ridotte con l'opzione OFFSET Tey07=Disabilitare e' inutile per la risoluzione dei problemiSET Tey08=Questo forza il sistema per usare quanto piu' possibileSET Tey09=la memoria fisica, prima di usare l'hard diskSET Tey10=Raccomandato per computer con 256mb di RAM o oltreSET Tey11=Interessa le comunicazioni con periferiche incluseSET Tey12=schede audio FM/wavetable, playback-registrazione MIDISET Tey13=e disco di lettura-scritturaSET Tey14=Specifica i secondi che si esegue un applicazione conSET Tey15=priorita' incrementata quando riceve una battitura. Rende laSET Tey16=tastiera piu' pronta quando si eseguono applicazioni multiple.SET Tey17=Imposta il tempo minimo in cui ogni processo haSET Tey18=accesso alla CPU. Valori bassi migliorano il multi-taskingSET Tey19=ma diminuisce le prestazioni generali e viceversa.SET Tey20=Per attivare il supporto ai removibiliSET Tey20a=drive:: like as in "turn on support for removable drives like Iomega, Syquest, etc"SET Tey21=per esempioSET Tey22=dipende dalla RAMSET Tey23=Specifica dimensioni di ogni blocco del buffer di memoria in byteSET Tey24=Usa chunk grandi se hai molta RAMSET Tey24a=ma troppo grande funzionera' a dispetto dell'efficienzaSET Tey25=E' una buona idea usare valori che sono multipli di:: min as in minimumSET Tey26=min:: max as in maximumSET Tey27=maxSET Tey28=Vcache is the Windows disk-caching virtual device driverSET Tey29=Fornisce prestazioni del disco eccellenti, per non usarneSET Tey30=altri, es SmartDrv, ecc...SET Tey31=EccellenteSET Tey32=caricaSET Tey33=installaSET Tey34=di Edited March 16, 2007 by Max_04 Link to comment Share on other sites More sharing options...
soporific Posted March 16, 2007 Author Share Posted March 16, 2007 (edited) RAM value code doesn't work still.... for check, I've ? ram installed.... Why ? instead of a normal number?This is because i am trying to use the text from the DOS window when you type FREEMEM at the command line. If i get it wrong, then we don't get a number. Can you type the following at the command line (after navigating to where FREEMEM lives, ie <your path>\AutoSYSTEMini\bin )FREEMEM > C:\MyMEM.txtand send me the text inside the MyMEM.txt file. Thanks for the new text ...EDIT: I think i can see the problem!! (imagine me smacking my head with my hand) -- D'OH!! New version out soon ...but please still send me that info, Max_04, just in case ... Edited March 16, 2007 by soporific Link to comment Share on other sites More sharing options...
Max_04 Posted March 16, 2007 Share Posted March 16, 2007 RAM value code doesn't work still.... for check, I've ? ram installed.... Why ? instead of a normal number?This is because i am trying to use the text from the DOS window when you type FREEMEM at the command line. If i get it wrong, then we don't get a number. Can you type the following at the command line (after navigating to where FREEMEM lives, ie <your path>\AutoSYSTEMini\bin )FREEMEM > C:\MyMEM.txtand send me the text inside the MyMEM.txt file. Thanks for the new text ...EDIT: I think i can see the problem!! (imagine me smacking my head with my hand) -- D'OH!! New version out soon ...but please still send me that info, Max_04, just in case ...MyMEM.txt:Memory Type Total Used Free---------------- -------- -------- --------Conventional 640K 36K 604KUpper 160K 160K 0KReserved 224K 224K 0KExtended (XMS) 261,108K 36K 261,072K---------------- -------- -------- --------Total memory 262,132K 456K 261,676KTotal under 1 MB 800K 196K 604KLargest executable program size 604K (618,960 bytes)Largest free upper memory block 0K ( 0 bytes)Windows is resident in the high memory area. Link to comment Share on other sites More sharing options...
soporific Posted March 16, 2007 Author Share Posted March 16, 2007 (edited) ah ha! I was using Memoria totale for the italian local --- which is what you told me!! Maybe that was when we were using MEM ... so when you use FREEMEM, the string is "Total memory" --- correct? That's why ...Another string:SET Tey35=It seems you haven't yet made an undo file.EDIT: OK, we need to start collecting the settings for languages from WIN.INI ...Please open WIN.INI and look in the [intl] section and tell me what your sLanguage= setting is. Is there a list somewhere I can use? Edited March 16, 2007 by soporific Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now