kennetm Posted January 3, 2007 Posted January 3, 2007 I have a HP ProLiant ML150 G2 Server.This was working fine until one day I realized that the screen was black.I try to boot the server, but the screen is black. I cannot get into the bios.Anybody that can help me ???Kenneth
nitroshift Posted January 3, 2007 Posted January 3, 2007 Does it boot at all? Any fans spinning? Can you hear the POST beep? Have you tried with a different monitor?
kennetm Posted January 3, 2007 Author Posted January 3, 2007 When I boot the server, the fans is spinning. I get a light on the CD-rom, but not on the FDD. After a couple of seconds the light goes off from the CDrom, and - nothing! Everything seems right on the server. "Powerlight" is on.Screen is black - no signal.I switched the graphic card, but that didn't help.Disconnected cd CDrom and fdd from the system board, no help.The server is connected to a switch. The lamp on the port turn green - so does the ethernet port on the server.
fandangle4 Posted January 3, 2007 Posted January 3, 2007 I see noone has replied about your problem yet, so... I had an MSI K7NG2-L motherboard in a computer that ran ok for 9 months and it seemed to have done the same thing as your computer did. I sold the motherboard and later I asked the guy I sold it to if he got it to work, and he said he did get it to work. So hang in there, I think you can get your computer to work again...somehow.
nitroshift Posted January 3, 2007 Posted January 3, 2007 Can you hear the POST beep? Chances are that your BIOS might have got corrupt. Clear it and see if it works.
jim-p Posted January 3, 2007 Posted January 3, 2007 You don't hear any BEEEEEPs from your board and ALL light indicators are working which means that your "tower" is working.Inserting an other vga card did't help...Well,unfortunately, this means one thing, YOU'VE BURNT YOUR MONITOR!
kennetm Posted January 3, 2007 Author Posted January 3, 2007 No beeps. And I have got a new monitor - did not help :-(
nitroshift Posted January 3, 2007 Posted January 3, 2007 No beeps = no POST. Clear the BIOS and see if it starts up. To clear the CMOS (BIOS) refer to the motherboard manual. If you haven't got one then unplug your pc from the mains, remove the battery located on the motherboard, wait ~10 seconds then plug it back in. Power up the pc and come back with your findings. Cheers.
kennetm Posted January 4, 2007 Author Posted January 4, 2007 I removed the battry for awhile just like you said. But no beeps...Got one little change - when I connect the power cord now, it starts automaticly. Before I had to press the button.What could I do now?
Littlebr00k Posted January 4, 2007 Posted January 4, 2007 I had this happen to me a while back and finally traced the problem to the CPU. Try removing it and cleaning out any dirt and replacing it. If not change the CPU for another one and you will find the PC will boot.
nitroshift Posted January 4, 2007 Posted January 4, 2007 I'd start off by checking the PSU, then the motherboard. Can you see any damaged capacitors on the motherboard (odd shaped ones)? Change the PSu first and reboot.
kennetm Posted January 4, 2007 Author Posted January 4, 2007 I tryed something here...I stripped down the server - and then I got beeps! 1-3-3-1. Means troubleshoot the system memory or troubleshoot the motherboard. How can I do that? Does that mean that I should replace the motherboard?
nitroshift Posted January 4, 2007 Posted January 4, 2007 Replace the RAM and try again. If you still hear more than a short beep then your motherboard is dead.
kennetm Posted January 4, 2007 Author Posted January 4, 2007 Replaced the RAM.The beeps disappeared, but nothing more.Then it looks like I need a new motherboard?
nitroshift Posted January 4, 2007 Posted January 4, 2007 Try a different power supply that you know it's working. If this doesn't work either, then I'm afraid you need another motherboard.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now