the mic cable looks like this:

http://www.musiciansfriend.com/product/Gen...bles?sku=338001

what equitments i need in order for the mic to work on computer?

a quick google gave me this

http://www.samash.com/catalog/showitem.asp?SKU=HXVM105MX

http://www.samash.com/catalog/showitem.asp?SKU=HCYX403

http://www.jacksmusicfactory.com/default.a..._2_XLRM_Y_Cable

you will want to plug the one end to the mic and the other to your input/mic on the sound card

a quick google gave me this

http://www.samash.com/catalog/showitem.asp?SKU=HXVM105MX

http://www.samash.com/catalog/showitem.asp?SKU=HCYX403

http://www.jacksmusicfactory.com/default.a..._2_XLRM_Y_Cable

you will want to plug the one end to the mic and the other to your input/mic on the sound card

yea, this is what i'm looking for.

what's the general name that this cable call?

well the computer end of it is a 1/8 mini jack

the microphone is called cyx

The microphone end is an 3 pin XLR. You need a dual ( female) XLR to 1/8" stereo phone plug for stereo,

or a single (female) XLR to 1/8" mono phone plug for mono.

Or if you want to get fancy.

http://www.studio1productions.com/xlr-pro.htm

Edited February 17, 200620 yr by RJM

The microphone end is an 3 pin XLR. You need a dual ( female) XLR to 1/8" stereo phone plug for stereo,

or a single (female) XLR to 1/8" mono phone plug for mono.

Or if you want to get fancy.

http://www.studio1productions.com/xlr-pro.htm

what's the difference between dual female XLR and mono female XLR? and what stereo phone plug look like?

and also, will the transmission from XLR to 1/8" phone jack downgrade the outcoming sound?

and what stereo phone plug look like?

By A dual female I mean "2" XLR"s, a stereo phone plug has two rings (see lordfett"s picture although that is 1/4" and you need 1/8" diameter. It could downgrade the sound output by adding hum as the XLR's are ballanced input (+ and -) and the phone plugs are unballanced (just + and ground) but since the input to the computer is an unballanced you should try this first, it will probably work just fine. I would suggest trying the cable and if you have hum you might have to get an input transformer to convert ballanced to unballanced inputs.

You should not need this though if you have short cable runs (less than 15 Ft.).

Hope this helps!

Edited February 17, 200620 yr by RJM

(see lordfett"s picture although that is 1/4" and you need 1/8" diameter.

The 1/8" diameter was not usually called a phone or phono. They're usually called a mini-jack or mini-plug. Least that is how it was back when I was doing this stuff for school in the late 80s early 90s.

The 1/8" diameter was not usually called a phone or phono. They're usually called a mini-jack or mini-plug. Least that is how it was back when I was doing this stuff for school in the late 80s early 90s.

Lordfett, I must disagree, A phone plug is a plug with a "tip" and a "ring" A phono plug or RCA phono plug has a center and a shield. The phone plug style got it's name from the telephone switchboards of the thirties.

http://www.sfu.ca/sca/Manuals/ZAAPf/p/phone_plug.html

Edited February 18, 200620 yr by RJM

i plan to buy both the XRL to 1/4" cable and 1/4" to 1/8" cable.

are the following the correct one?

http://www.musiciansfriend.com/product/Gen...bles?sku=331513

http://www.musiciansfriend.com/product/Gen...bles?sku=335216

That looks like what you need, not a bad price either.

That looks like what you need, not a bad price either.

thanks