i´m despairing...

i have tested many many guides, but ALLWAYS i get a blue (stop 0000007b) error. it´s a "normal" windows, no Multi DVD. the curious thing is, that i use these version 5 months ago and it worked. but now

my txtsetup

[SourceDisksFiles]
iaStor.sys = 1,,,,,,3_,4,1

[HardwareIdsDatabase]
PCI\VEN_8086&DEV_27C3&CC_0104 = "iaStor"
PCI\VEN_8086&DEV_27C1&CC_0106 = "iaStor"
PCI\VEN_8086&DEV_2652&CC_0104 = "iaStor"
PCI\VEN_8086&DEV_2652&CC_0106 = "iaStor"
PCI\VEN_8086&DEV_2653&CC_0106 = "iaStor"
PCI\VEN_8086&DEV_24DF&CC_0104 = "iaStor"
PCI\VEN_8086&DEV_25B0&CC_0104 = "iaStor"

[SCSI.load]
iaStor = iaStor.sys,4

[SCSI]
iaStor = "Intel(R) Series SATA RAID Controller"

i have the newest intel iastor driver. My board is a asus p5wd2 with intel ich7raid.

Did you change your RAID setup? Or is it operating in AHCI mode?

EDIT: split the topic.

Edited November 13, 200520 yr by Bâshrat the Sneaky

no, nothing change.

ICH7 Raid @Matrix Mode, no AHCI.

i have tested CD or MultiBootDVD. Nothing work. strange....

the textmode load all drivers (also iastor), the text "windows is starting" is the last what i see. Then BSOD.

Edited November 13, 200520 yr by webwilli

Check your dosnet.inf and txtsetup.sif. Double check your I386 folder if the file exists.

dosnet.inf?

the file iastor.sys exists, iastor.sys and iastor.sy_

i have changed my txtsetup now to this:

[SourceDisksFiles]
iaStor.sys = 1,,,,,,4_,4,1,,,1,4

now i test it

did you get this working?

I have the same issue, it will work if I have a floppy drive connected.

If I don't have one connected, it will give me a blue screen.

TIA!!

not yet

always get BSOD

i will try another method later...

another test...

nothing better. BSOD... BSOD... BSOD...

we need help

argh.......... even with an original Windows CD SP2 with FDD (USB) no go.

any idea´s here?

edit: nlite seems to work. very good. (Y)

Edited November 28, 200520 yr by webwilli

you should use the integrated floppy drive, not a usb-floppy, the bios-imulation of your mainboard is offten buggy.

The solution for the issue you are reporting is listed in the following

link:

http://support.intel.com/support/chipsets/...b/CS-020680.htm

Not sure if this will help you but it did resolve the problem for me.

I tried several different methods to include the ICH7R drivers but they all failed. However, each time I verified folder structure, the path, and so on.

No matter what I ended up with the BSOD referencing a 0x0000007b error.

I found the solution by luck when google tagged a KB article from Microsoft with the solution - KB839210.

Ultimately the problem was due to the fact that I was using a USB CD-ROM.

The problem went away as soon as tried with an IDE CD-ROM. It also went away after I updated the bits with the hotfix from Microsoft when using a USB CD-ROM.

Good luck and hope this helps.

Please follow up if this helped.

~jason