Ok. I was just given a new setup.

Asus p4s333 mobo

Intel pentium 4 will 1.6 @ 2.0

2 x 256 kingmax ram cas 2.5

... and a GF4 ti4200 64 megger made by Unika

When i put the ti4200 in, the screen stays black when i try to boot and the mobo says cpu test failed.

When i put in my rage 128 it boots fine

When i put in my broken raddy 7500 le it boots put is ultra artifacted.

When i put no card in the mobo says vga test failed.

Why won't it say vga test failed for my ti4200?

Anyways, the card pcb is using the nvidia reference design but is purple like the daytona ones.

My p4s333 is using the 1009 beta 2 bios. Asus update won't let me rollback. 3dmark2k1 won't run. it says my cpu has no mmx (+) instructions

I tried the latest official bios before, same resultes.

Someone help plz. My rage 128 making me wanna puke.

Thx

Edit: Unika doesn't even seem to have a website.

maybe for one.. ur OC too much.. i could be wrong.. can u access ur bios?

I can access the bios with the rage 128 but not with the ti4200.

I never o/ced the ti4200.

chip goes 2 ghz perfectly stable @ 30-32 C idle

Maybe i'll get a pci card and try flashing a different bios onto the ti4200.

If you are running a higher FSB to OC, you should try it at the stock speeds..

tried... same resultes...

sniff sniff...

Nobody can help?

I would suggest you try the card in a different system to check if its not the card thats defective if you haven't already tried that, thats the last think I could think of to do..

I'll try it as soon as my other system comes back from repairs.

One last bump?

yeh.. i agree with filer.. i had a problem and tried in parents pc.. found out it was my 3d card settings..

certain mobos(like mine) sometimes don't like certain 3d card and its settings..

I had to disable SBA(SideBand Addressing) as my mobo didn't have the feature