Langlest Posted August 15, 2005 Share Posted August 15, 2005 for some reason my second hdd is not working as it should,its a 300gig sata drive and its been like this since i put it in my new pc (it was working perfectly in my old one) when i go to browse the contents of the drive by double clicking on it in my computer it opens instantly as it should,but then it wont let me go into any of the folders on the drive for a few seconds it wont even let me hilight them.the drive also crashes my pc sometimes. i get the bsod and then windows will fail to restart(another bsod before the loading screen) when i check the bios its not being detected untill i power off then on again its driving me mad because i know there is nothing wrong with the drive and i cant seem to find the solution to the problemhere are my system specsAMD Athlon 64 FX-57 ProcessorNVIDIA GeForce 7800 GTX Extreme EditionSB Audigy 2 ZS AudioCorsair 1024Mb XMS4000XL Pro X-Treme Low Latency Memory Abit Fatal1ty AN8 SLI Motherboard120gig Maxtor SATA 300gig Maxtor SATAi didnt install any sata drivers because i dont have a floppy drive Link to comment Share on other sites More sharing options...
Silverscreen Posted August 15, 2005 Share Posted August 15, 2005 bsod are usually associated with windows system failure. i'd concentrate there. i'm not very familiar at all with sata drives so i prob have got the wrong end of the stick and being stupid trying to help u. ive had my share of hdd not being recognised and failing, but its never given me the blue screen. mayb u sud try installing the sata drivers just to see if it might inprove things. its definitely a software problem maybe a reinstall or update of the concerned software is needed.i wish you good luck and hope that others can be far more helpful than me Link to comment Share on other sites More sharing options...
ripken204 Posted August 15, 2005 Share Posted August 15, 2005 try it in another pc just to make sure, i know it worked ir old one but mbe something happened to itand do u have the latest driver for it? Link to comment Share on other sites More sharing options...
Langlest Posted August 15, 2005 Author Share Posted August 15, 2005 thanks for the help guys,i installed the software from the maxtor website but it didnt seem to help,do you know how i would go about installing the sata drivers without a floppy drive? Link to comment Share on other sites More sharing options...
ripken204 Posted August 15, 2005 Share Posted August 15, 2005 im not sure but is it possible to use a cd or a flash drive? Link to comment Share on other sites More sharing options...
Technoguy Posted August 15, 2005 Share Posted August 15, 2005 well did u try 2 check out ne other hdd connected as slave?it just mite be that the port's bad u mite have 2 go for a mobo change.it's just a hunch.for SATA drivers u can install em thru the cd also. Link to comment Share on other sites More sharing options...
Langlest Posted August 15, 2005 Author Share Posted August 15, 2005 im pretty sure that i have both my drives set as master maybe that is the problem Link to comment Share on other sites More sharing options...
Technoguy Posted August 16, 2005 Share Posted August 16, 2005 @langlest mite be u have set em as primary master and secondary master.there mite be some prob in ur secondary port or some cables prob.just set ur hdd1(from where u boot)as primary master and the undetected hdd as primary slave and just set ur cd/dvd reader/burner as secondary master and check whether both hdd and cd/dvd is working or not Link to comment Share on other sites More sharing options...
svasutin Posted August 17, 2005 Share Posted August 17, 2005 If you have SATA II drives on an SATA (I) controller, you need to turn off auto speed detection by placing a jumper on it.Otherwise, try having Msft tell you about the error:Ensure error reporting is turned on:Right Click My Computer, Select PropertiesLick the advanced tabClick the Error Reporting buttonCheck the Enable Error reporting radio buttonCheck both win and programs check boxesClick OkClick ApplyNext, in the Start Up and Recovery Section of the same tab (Advanced)Click the 'settings' buttonCheck everything except for Auto restartSelect Complete Memory DumpClick OkClick Apply, Click Ok*** OptionalDoc WatsonClick Start | All Programs | Accessories | System Tools | System InformaitonClick Tools Dr WatsonNote your Log and Crash Dump locationstry 50, 50, fullCheck Dump Sym, Dump All thread, create crash dumpUncheck Visual, sound***Generate the BSODLook up the errorRight Click My Computer, Select ManageClick Event ViewerLook for your BSOD red x error underApplication, Security, and or SystemDouble-Click the http://go.microsoft.com/fwlink/events.asp urlHopefully you're not the only person with this error. Link to comment Share on other sites More sharing options...
Langlest Posted August 17, 2005 Author Share Posted August 17, 2005 its not coming up with anything that i can sort out,there were a lot of errors in my system log but all of them seem minor problems,i think im going to buy another motherboard but im not sure what to go for,could someone point me in the right direction? it has to have sli and be compatable with all the parts i listed above Link to comment Share on other sites More sharing options...
gray916 Posted August 18, 2005 Share Posted August 18, 2005 Hi,I had a smiliar sounding problem. I took it to one of me mates, who took the back of the computer off and pushed the connecting cable back in. It had fallen out. Could be something as simple as that.PS. I felt like a right id***. I thought id got a problem that would stump my mate, ant it was the bleeding cable that had just fallen out.Cheers Link to comment Share on other sites More sharing options...
Langlest Posted August 18, 2005 Author Share Posted August 18, 2005 i think i may have found the cause of my problems,i just updated to the latest nforce drivers and i was getting a bsod as soon as windows started,it happend in safe mode too when i included network support,i tried normal safe mode and it worked fine! i did a system restore and uninstalled my nvidia forceware network acccess manager then updated the nforce driver again,so far i havent had a bsod yet i also checked the large hdd to see if it needed a defrag and i was amazed how overdue one was,so far i havent had another bsod and my hdd access has been a lot faster Link to comment Share on other sites More sharing options...
ripken204 Posted August 18, 2005 Share Posted August 18, 2005 omg, loldont use the windows defrag, it sucks, get diskeeper Link to comment Share on other sites More sharing options...
ringfinger Posted August 18, 2005 Share Posted August 18, 2005 PerfectDisk 7.0 !!! Link to comment Share on other sites More sharing options...
DonDamm Posted August 18, 2005 Share Posted August 18, 2005 ripken204, that is a strange thing to say! Afterall the built in defragger is coded by Executive software and infact is the same engine without all the options you get in Diskeeper like scheduling and the performance map etc.Have you ever done any tests concerning access times before and after, stuff like that? If you did, I think you'd be surprised.Perfect Disk is a fine defragger if you want to pay for one. Actually, you can use the native defragger from the command line. I do that during installs, in fact. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now