i have 2 problems need to be solved

[kurt476]

problem 1:

The Parallel port driver service failed to start due to the following error:

The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

problem 2:

AMLI: ACPI BIOS is attempting to read from an illegal IO port address (0x4d0), which lies in the 0x4d0 - 0x4d1 protected address range. This could lead to system instability. Please contact your system vendor for technical assistance

ok i don't use parallel port.

2 i never use ACPI.

please help me solve these both thanx.

Edited August 9, 2005 by kurt476

[ripken204]

so whats the problem if u dont use them? look in the device manager to make sure that they are enabled tho.

[ripken204]

so whats the problem if u dont use them? look in the device manager to make sure that they are enabled tho.

[kurt476]

so whats the problem if u dont use them? look in the device manager to make sure that they are enabled tho.

i want too disable them and the parallel port isn't showing in device manager, i want too disable ACPI i don't use either. the acpi i need some way off disabling that. do you know away of doing these?

P.S. don't repeat your self more then once on this forum. thank you for not repeating this again.

Edited August 10, 2005 by kurt476

[Rayza]

Is this a new installation or an old existing one with a new problem? Have you checked your BIOS to disable any uneeded settings there?

[kurt476]

Is this a new installation or an old existing one with a new problem? Have you checked your BIOS to disable any uneeded settings there?

yes i did disable uneeded settings in the bios. this is a new installation.

[ripken204]

u can disable the parallel port, its the same as the printer port right? just go into the device manager and open up ports

[ChunkDog]

What motherboard is it?

Did you disable the parallel port in the BIOS?

Did you Disable ACPI settings in the BIOS?

Have you checked to see if you need to update (Flash) the BIOS?