esp Posted November 1, 2004 Share Posted November 1, 2004 Thanks for the tips, but what should be the eof marker? I compared the original txtsetup with the one from me and from bts (with foldermatch v3.3.7, can compare files also), only the original has a square at the end. Link to comment Share on other sites More sharing options...
hp01jpc Posted November 2, 2004 Share Posted November 2, 2004 TWILL I have the same problem as you. I have tried a number of the methods and in most of them, the SATA driver doesn't flash up on the bottom of the screen, and my SATA drive is not found. When I tried RASOR, I got a very similar message to you.Have you managed to resolve this problem as yet? I am using the Silicon Image 3114 driver and seem to be experiencing the same difficulties as yourself.Please let me know if you get a breakthrough.ThanksJamesps don't forget to vote tomorrow Link to comment Share on other sites More sharing options...
TWILL Posted November 2, 2004 Author Share Posted November 2, 2004 Thanks everyone for the replies and tips.I did finally get the unattended setup to start recognizing the SiI 3112 Mass Storage driver for my SATA drives!!! Unfortunately, I haven’t had a chance until now to post how I fixed it. If anyone has been waiting patiently to see if I found a solution I apologize for the delay, as I dislike reading posts that aren’t followed up with a solution (if there is one).I tried several times from the beginning hoping I just messed up somewhere along the way. I wasn’t going to let this go so I kept trying.Finally I decided to do a side by side comparison of each method to see if I could find anything that would give me a clue as to what was wrong. One thing I knew was I never saw the drivers go by at the bottom of the setup screen, so I knew windows setup wasn’t finding them.Finally I noticed that there were several variations of the [sourceDiskFiles] sections that are to be added in the txtsetup.sif file.Here are some of the comparisions:Bâshrat the Sneaky/Pyron’s[SourceDisksFiles]si3112.sys = 1,,,,,,4_,4,1,,,1,4 si3112r.sys = 1,,,,,,4_,4,1,,,1,4GreenMachines:[SourceDisksFiles] si3112.sys = 1,,,,,,3_,4,1Raskren:[SourceDisksFiles]si3112.sys = 100,,,,,,3_,4,1,,,1,4The info Ive seen on what all the numbers mean is a bit lengthy and confusing so I did some looking around in the txtsetup.sif file and found that Raskren’s was closest to what I had already in the [sourceDiskFiles] section for other drivers. I changed my [sourceDiskFiles] entry to a variation of what Raskren had and it worked!! Im not saying that GreenMachines or Bashrats are wrong, they just didn’t work for my case. Be sure to look at the section [WinntDirectories] then look at some other drivers in the [sourceDisksFiles] sections. Just a note: Once I did get it working, I didnt go back and try Bashrat's method.@hp01jpc and anyone else having trouble getting any methods to work.If you havent already, you may want to try Raskens method here: http://www.msfn.org/board/index.php?showtopic=13173 with a few minor changes for your own drivers. Let me know how it works out for you.So basically what I am saying is if you don’t see your driver go by during the windows setup check your [sourceDiskFiles] locations and make sure you are pointing to the right place where your driver exists.Goodluck.TWILLthanks for the voting reminder. Im sure will all the tv ads I couldnt forget if I tried!!! I am very thankful I live in a country where I can vote, but I must say I am so sick and tired of the tv and radio smear ads!!!! Link to comment Share on other sites More sharing options...
hp01jpc Posted November 2, 2004 Share Posted November 2, 2004 Hey again twill. Thanks for the replies mate. I was just wondering if you'd dome the same thing as me when trying the rasor method. We both had similar error messages so I thought this might be the case.Basically, when I selected the driver I needed within RASOR I didn't double click on it, so it didn't download - BUT the program came up with a message saying 'driver repackaged' which made me think it had worked ok.I'm just trying it again now, but if it fails I will go and research raskens method.Thanks for the help.Yea I don't blame you about the ads, we've seen half of them in this country too. In fact the British media is covering the election almost as much as they would a domestic one! Link to comment Share on other sites More sharing options...
hp01jpc Posted November 2, 2004 Share Posted November 2, 2004 Righty ho... No error messages in VPC, and I think I saw the words 'silicon image' fly up at the bottom. Because it's reading from the ISO image and not a CD, it all goes by so quick I can't be sure, but this is looking very promising... Link to comment Share on other sites More sharing options...
hp01jpc Posted November 2, 2004 Share Posted November 2, 2004 Ok I burnt the image file and tried it out. It works a treat - finds the hard drive. I haven't tested it yet fully, but I think if it gets that far, we can say it's sorted. So, TWILL, if you did happen to make the same mistake as me, simply double clicking on the driver you want within the RASOR program might be your remedy, but if you're sorted out now with another method then all well and good.Finally! I'm so happy Link to comment Share on other sites More sharing options...
TWILL Posted November 2, 2004 Author Share Posted November 2, 2004 Glad you got it going. Its such a relief isnt it? I know it was for me. Link to comment Share on other sites More sharing options...
www2000 Posted November 24, 2004 Share Posted November 24, 2004 Question along these lines:IF... If you intergrate SATA drivers into the unattended CD or DVD....Do you have to have the SATA drive in the PC?I'd like to intergrate it so if/when the customer decides to put a SATA drive in, the Unattended DVD will be ready to go.Or will I have to make 2 of them, one for their IDE hard drive and 1 for their SATA?To advoid "Harddrive not Found" screen...Thanks in advance for answers!Wisc Link to comment Share on other sites More sharing options...
Bâshrat the Sneaky Posted November 24, 2004 Share Posted November 24, 2004 Just integrate as much SATA controller drivers, to support as many SATA controllers as possible! ^^This is the reason for the existence of DriverPack MassStorage Link to comment Share on other sites More sharing options...
www2000 Posted November 26, 2004 Share Posted November 26, 2004 Thanks BashratI couldn't imagine why someone hasn't made this a Sticky for the DriverPack MassStorage, but I took the hint and threw it in search...Will be VERY useful! Thanks again!Wisc Link to comment Share on other sites More sharing options...
Bâshrat the Sneaky Posted November 26, 2004 Share Posted November 26, 2004 It *WAS* a sticky, but there was a sticky for every DriverPack, so the stickies section was becoming quite messy.... That's why I made a new sticky "Bâshrat the Sneaky's DriverPacks: Overview"... Link to comment Share on other sites More sharing options...
www2000 Posted November 27, 2004 Share Posted November 27, 2004 I was in hopes the infomation for the TXTSETUP.SIF would be included...I get the feeling I'm not reading the INF files right. Some of them didn't even have the PCI information in them. See?[sourceDisksFiles]iaStor.sys = 1,,,,,,4_,4,1,,,1,4NvAtaBus.sys = 1,,,,,,4_,4,1,,,1,4Si3112r.sys = 1,,,,,,4_,4,1,,,1,4Si3114r.sys = 1,,,,,,4_,4,1,,,1,4viasraid.sys = 1,,,,,,4_,4,1,,,1,4[HardwareIdsDatabase]PCI\VEN_8086&DEV_2652&CC_0104 = "Intel"PCI\VEN_8086&DEV_24DF&CC_0104 = "Intel"PCI\VEN_8086&DEV_25B0&CC_0104 = "Intel"PCI\VEN_10DE&DEV_008E&REV_A2 = "NVidia"PCI\VEN_10DE&DEV_008E&REV_A3 = "NVidia"PCI\VEN_1095&DEV_3112 = "Silicon12"PCI\VEN_1095&DEV_3114 = "Silicon14"PCI\VEN_1106&DEV_3149 = "viasraid"[sCSI.load]Intel = iaStor.sys,4NVidia = NvAtaBus.sysSilicon12 = Si3112r.sysSilicon14 = Si3114r.sysviasraid = viasraid.sys,4[sCSI]Intel = "Intel® SATA RAID Controller"NVidia = "NVIDIA MCP2S Serial ATA Compatible Controller"Silicon12 = "Silicon Image Serial ATA Raid 3112 Controller"Silicon14 = "Silicon Image Serial ATA Raid 3114 Controller"viasraid = "VIA Serial ATA RAID Controller" Link to comment Share on other sites More sharing options...
Bâshrat the Sneaky Posted November 27, 2004 Share Posted November 27, 2004 Indeed. For example when you look in the driver inf files of ACARD, you will notice there are no hardware ID's either...I have not yet tested what the result would be when there are no hardware ID's in the txtsetup.oem file, but most likely the driver will not work...P.S.: where did you quote that txtsetup.oem file from? Link to comment Share on other sites More sharing options...
www2000 Posted November 30, 2004 Share Posted November 30, 2004 Mine... Is it incorrect?See I think your Mass Pack things would be so so very awesome ifthey were separated so individuals could get only what they want.And if they had the little guide explaining where to put them.And they had the entries for the TXTSETUP.SIF and any other file that would need modified. That's asking WAY to much huh! Only reason I even jumped in on this topic was because there are some of the .inf files that had like a dozen or more different IDs and I was like... TELL me I'm not suppose to put in everyone one I see!These are all the ones in nvatabus.inf file, but I didn't add it yet because I wasn't sure if I was to grab ALL those PCI\VEN lines...[NVIDIA]%MCP2Desc%=Crush11_Inst,PCI\VEN_10DE&DEV_0065%CK8Desc%=Crush11_Inst,PCI\VEN_10DE&DEV_00D5&REV_A2%CK8DescSB%=Crush11_Inst,PCI\VEN_10DE&DEV_00D5&REV_F2%CK8Desc%=Crush11_Inst,PCI\VEN_10DE&DEV_00D5&REV_A4%CK8DescSB%=Crush11_Inst,PCI\VEN_10DE&DEV_00D5&REV_F4%CK8Desc%=Crush11_Inst,PCI\VEN_10DE&DEV_00D5&REV_A5%CK8DescSB%=Crush11_Inst,PCI\VEN_10DE&DEV_00D5&REV_F5%CK8Desc%=Crush11_Inst,PCI\VEN_10DE&DEV_00D5&REV_A6%CK8DescSB%=Crush11_Inst,PCI\VEN_10DE&DEV_00D5&REV_F6%MCP2SS%=Crush11_Inst,PCI\VEN_10DE&DEV_008E&REV_A2%MCP2SS%=Crush11_Inst,PCI\VEN_10DE&DEV_008E&REV_A3%MCP2SP%=Crush11_Inst,PCI\VEN_10DE&DEV_0085%CK8SSP%=Crush11_Inst,PCI\VEN_10DE&DEV_00E5%CK8SSS%=Crush11_Inst,PCI\VEN_10DE&DEV_00EE%CK8SSS%=Crush11_Inst,PCI\VEN_10DE&DEV_00E3Then what makes it worse, the nvraid.inf doesn't have a SINGLE PCI\VEN line in the whole .inf file.The Si3112r.inf has ... Oh hell, I lost count around 50... Tell me you wouldn't put ALL those in your TXTSETUP.SIF!!!Has about the same amount in the [sI_HDC.NTx86.5.1] section of this .inf...Which I was sure I wouldn't need to worry about for XP...; ATI subsystem IDs need to be updated[ATI_HDC]%PCI\VEN_1002&DEV_436E.DeviceDesc%=ATI_436E, PCI\VEN_1002&DEV_436E&SUBSYS_436E1002A few of these also appear. *sigh*Seen this plenty; List of devices with known configuration issues.[ProblemDeviceList_AddReg]HKR,ProblemDevicesHKR,ProblemDevices, %ProblemDev1Name%, 0, %ProblemDev1Value%HKR,ProblemDevices, %ProblemDev2Name%, 0, %ProblemDev2Value%HKR,ProblemDevices, %ProblemDev3Name%, 0, %ProblemDev3Value%HKR,ProblemDevices, %ProblemDev4Name%, 0, %ProblemDev4Value%HKR,ProblemDevices, %ProblemDev5Name%, 0, %ProblemDev5Value%HKR,ProblemDevices, %ProblemDev6Name%, 0, %ProblemDev6Value%HKR,ProblemDevices, %ProblemDev7Name%, 0, %ProblemDev7Value%HKR,ProblemDevices, %ProblemDev8Name%, 0, %ProblemDev8Value%HKR,ProblemDevices, %ProblemDev9Name%, 0, %ProblemDev9Value%HKR,ProblemDevices, %ProblemDev10Name%, 0, %ProblemDev10Value%HKR,ProblemDevices, %ProblemDev11Name%, 0, %ProblemDev11Value%HKR,ProblemDevices, %ProblemDev12Name%, 0, %ProblemDev12Value%See your brains come in VERY handy for those of us who are likeDuhhhh! What?Personally, If I had the Abit system here, I'd play with it from an DVD+RW till I got it right, but 2 problems.1: It's not getting mailed till Wednesday2: There won't be a SATA drive in it... I just wanted it prepared for ... *Teacher who I helped get it* her so if she does get a SATA drive, it won't be nothing for her to get it up and running.I even threw in a few other software titles letting her know that she'd be responsible for registering them if she does use them and likes them. She's almost all set! Thanks for everything! And this is for Everyone reading this who has contributed!It's really apperciated!Wisc Link to comment Share on other sites More sharing options...
Bâshrat the Sneaky Posted November 30, 2004 Share Posted November 30, 2004 @www2000: well, that would indeed be asking way too much... If you want to have support for only some specific controlles, then download just the drivers for those controllers! This DriverPack is meant to create a UNIFORM UWCD, which means support for as many hardware as possible! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now