TCP/IP Config, how?

[ElMonty]

HI!

That's my problem, ive been trying to configure the TCP/IP protocol (IP address, default gateway, DNS addresses and subnet mask)for my network adapter but i couldn't Ive been "playing" with the winnt.sif guided by the ref.chm, and also using some .reg files. But always the protocol is configured automatically.

How can I do that, im not pretty sure if the lines i added to winnt.sif are correct, could anyone post an example?

Thnx!

[Glowy]

These setting should work fine..

Make sure the adapternumber is correct

[params.MS_TCPIP.Adapter1]    SpecificTo=Adapter1    DHCP=No    IPAddress=192.168.0.1    SubnetMask=255.255.255.0    DefaultGateway=192.168.0.253    DNSServerSearchOrder=192.168.0.253

[ElMonty]

[NetAdapters]    Adapter01=params.Adapter01
[Params.Adapter01]    INFID="PCI\VEN_8086&DEV_1229&SUBSYS_10C0103C&REV_02\3&61aaa01&0&58"
[params.MS_TCPIP]    AdapterSections= params.MS_TCPIP.Adapter01
[params.MS_TCPIP.Adapter01]    SpecificTo=Adapter01    DefaultGateway=192.168.0.10    DNSServerSearchOrder=192.168.0.10,195.235.96.90    DHCP=No    IPAddress=192.168.0.1    SubNetMask=255.255.255.0

That was my last try and it failed Maybe the INFID is wrong, i got it from setuplog.txt (from a previous installation). I searched for my network adapter and found that:

05/12/2004 19:19:35,d:\xpsp1\base\ntsetup\syssetup\syspnp.c,2908,,SETUP: Index = 26, [b]DeviceId = PCI\VEN_8086&DEV_1229&SUBSYS_10C0103C&REV_02\3&61aaa01&0&58[/b]05/12/2004 19:19:35,d:\xpsp1\base\ntsetup\syssetup\syspnp.c,2929,BEGIN_SECTION,05/12/2004 19:19:35,d:\xpsp1\base\ntsetup\syssetup\syspnp.c,2986,,SETUP:            Device was NOT installed via answer file driver05/12/2004 19:19:35,d:\xpsp1\base\ntsetup\syssetup\syspnp.c,3124,,SETUP:            DriverType = 205/12/2004 19:19:35,d:\xpsp1\base\ntsetup\syssetup\syspnp.c,3125,,SETUP:            Description = [b]NetServer 10/100TX PCI LAN Adapter[/b]

Is that the ID? (i supposed so viewing the examples in ref.chm)

Thnx Glowy

[edmoncu]

i am anewbie at manually specifying tcp/ip add from winnt.sif... i was wondering, is it specific with the LAN card present on the pc? or can i enter a generic ip setting that will work with all pc's?

[ElMonty]

anyone? plz

[Alanoll]

You only need this part...

PCI\VEN_8086&DEV_1229

Also, it won't work if you're testing in a virtual machine.

[ElMonty]

Thx, Alanoll, ill try it.

[Bâshrat the Sneaky]

Is there also away to do this IN Windows, through a batch file? (I guess not, but I ask it anyway because it might be very usefull)