BJMckay Posted February 28, 2011 Posted February 28, 2011 I previously had a raid array, and now installing fresh on one of these drives. I have changed the the configuration from RAID back to IDE in the bios, but the installer is not finding the drive, yet i can see the drive in the bios on sata port 1.I know i had to load drivers for sata-raid, but surely not for one disk?
Tripredacus Posted February 28, 2011 Posted February 28, 2011 The drive itself may still be set to RAID. You haven't posted a lot of information about your previous RAID configuration, such as type or controller. If you do not need the data on the drive, you can write zeroes to it, although a low-level format may be able to remove the RAID flag as well. Sending to Drives forum for more insight.
cdob Posted February 28, 2011 Posted February 28, 2011 I previously had a raid array, and now installing fresh on one of these drives.Clean the hard disk.Press shift F10, run diskpart, list disk, select disk N, clean.Boot win7 media again.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now