HowdyDoody Posted July 12, 2010 Share Posted July 12, 2010 Now I need your help.I bought a Gateway laptop last year. I bought a new HD and installed XP (no problem). Now I have to install XP again. However, wheb\n I boot from the CD, it cannot find the SATA drive. I collected all the drivers from my current installation and did an nLite inluding the drivers. When I booted from the CD, it loads the files and then asks me for my XP Pro CD. It still doesn't recognize my SATA drive. What am I doing wrong?LAST SESSION.INI Link to comment Share on other sites More sharing options...
Ponch Posted July 12, 2010 Share Posted July 12, 2010 You need to integrate textmode drivers for your sata controller (intel ICH7M).Check the 1st post in the 2nd sticky. Link to comment Share on other sites More sharing options...
HowdyDoody Posted July 12, 2010 Author Share Posted July 12, 2010 (edited) You need to integrate textmode drivers for your sata controller (intel ICH7M).Check the 1st post in the 2nd sticky.No luck! Same problem. Still asks for my XP Pro CD. I tried the nVidia driver, but my driver is good, and I do use it in text mode.I've downloaded SATA driver on the internet. This is definitely an nLite problem.I'm going to go back to my original installation CD without any service packs slipstreamed to see what will happen. Edited July 13, 2010 by HowdyDoody Link to comment Share on other sites More sharing options...
HowdyDoody Posted July 16, 2010 Author Share Posted July 16, 2010 I found a little program (much like nLite) and it installed my SATA driver on the first try. Me thinks nLite has a bug. Link to comment Share on other sites More sharing options...
jaclaz Posted July 16, 2010 Share Posted July 16, 2010 I found a little program (much like nLite) and it installed my SATA driver on the first try. Me thinks nLite has a bug.I am happy for you , but maybe if you post the name of (and possibly also a link to) this little program, someone else may benefit from your findings. jaclaz Link to comment Share on other sites More sharing options...
HowdyDoody Posted July 18, 2010 Author Share Posted July 18, 2010 I found a little program (much like nLite) and it installed my SATA driver on the first try. Me thinks nLite has a bug.I am happy for you , but maybe if you post the name of (and possibly also a link to) this little program, someone else may benefit from your findings. jaclazI was afraid nLite would get mad at me. The program does not allow you to edit Windows XP, but it will do an unattended install. I'll see if I still have it, or can figure out where I found it. Link to comment Share on other sites More sharing options...
HowdyDoody Posted July 18, 2010 Author Share Posted July 18, 2010 (edited) I found a little program (much like nLite) and it installed my SATA driver on the first try. Me thinks nLite has a bug.I am happy for you , but maybe if you post the name of (and possibly also a link to) this little program, someone else may benefit from your findings. jaclazI was afraid nLite would get mad at me. The program does not allow you to edit Windows XP, but it will do an unattended install. I'll see if I still have it, or can figure out where I found it.Here it is:http://www.softpedia.com/get/System/Boot-Manager-Disk/Windows-Unattended-CD-Creator.shtmlNow, if somebody could tell me where to find the network controller driver for my MX8711, I would greatly appreciate it. I have downloaded everyone I can find, but they just don't work.I hope I did that link correct. Edited July 18, 2010 by HowdyDoody Link to comment Share on other sites More sharing options...
jaclaz Posted July 18, 2010 Share Posted July 18, 2010 Good. Homepage is here:http://www.vitaligraf.de/en/?Projects:Windows_Unattended_CD_CreatorHere I would like to present "Windows Unattended CD Creator".Feature:Creation of a bootable ISO imageIntegration of service packsCreation of user accountsIntegration of: DriversHotfixesPatchesSoftwareThe program was tested meanwhile with german Windows 2000/2003/XP Home/Pro and english Windows XP pro x64 edition.jaclaz Link to comment Share on other sites More sharing options...
Ponch Posted July 18, 2010 Share Posted July 18, 2010 (edited) Now, if somebody could tell me where to find the network controller driver for my MX8711, I would greatly appreciate it. I have downloaded everyone I can find, but they just don't work.Found the wireless here on Geteway's site and it says it' for 2K, XP and Vista. Edited July 18, 2010 by Ponch Link to comment Share on other sites More sharing options...
HowdyDoody Posted July 18, 2010 Author Share Posted July 18, 2010 Good. Homepage is here:http://www.vitaligraf.de/en/?Projects:Windows_Unattended_CD_CreatorHere I would like to present "Windows Unattended CD Creator".Feature:Creation of a bootable ISO imageIntegration of service packsCreation of user accountsIntegration of: DriversHotfixesPatchesSoftwareThe program was tested meanwhile with german Windows 2000/2003/XP Home/Pro and english Windows XP pro x64 edition.jaclazIt is in english, though. Now it has been tested in the english version. Link to comment Share on other sites More sharing options...
HowdyDoody Posted July 18, 2010 Author Share Posted July 18, 2010 Now, if somebody could tell me where to find the network controller driver for my MX8711, I would greatly appreciate it. I have downloaded everyone I can find, but they just don't work.Found the wireless here on Geteway's site and it says it' for 2K, XP and Vista.I have been there, but I didn't see anything like you describe. I've just about given up. Link to comment Share on other sites More sharing options...
cdob Posted July 19, 2010 Share Posted July 19, 2010 Open device manager, select details of network card.Which HardwareId do you get? Link to comment Share on other sites More sharing options...
Ponch Posted July 19, 2010 Share Posted July 19, 2010 I have been there, but I didn't see anything like you describe.You don't get "2 items exactly match your selections" and a "display result" link ? Link to comment Share on other sites More sharing options...
HowdyDoody Posted July 19, 2010 Author Share Posted July 19, 2010 I have been there, but I didn't see anything like you describe.You don't get "2 items exactly match your selections" and a "display result" link ? I see two for Vista, but none for XP tat I haven't tried.. Link to comment Share on other sites More sharing options...
Ponch Posted July 20, 2010 Share Posted July 20, 2010 Ok, so you've found nothing and you ask for help. ... why not read our post and try what we found for you so not all of us are wasting our time ?I'm out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now