spotak2 Posted October 9, 2013 Share Posted October 9, 2013 please try NoteBook FanControl (NBFC):http://www.computerbase.de/forum/showthread.php?t=1070494and look if this works.Well I set the speed of the fan to maximum and it went well for like 5 minutes and then it started to do again.And when it stars it never goes down unless reboot. Link to comment Share on other sites More sharing options...
MagicAndre1981 Posted October 9, 2013 Author Share Posted October 9, 2013 what is the temperature when the fan runs at highest speed? Link to comment Share on other sites More sharing options...
spotak2 Posted October 9, 2013 Share Posted October 9, 2013 (edited) what is the temperature when the fan runs at highest speed?Until the glitch occurs it is all fine, under 50°C and when playing games under 60°C. But when it occurs and the usage of core 0 goes on 100% and the intterupts appear, the temperature seems to go higher. But it never was higher than 75-80°C even when used prime95. The fan is rolling on max, I took time yesterday and cleaner everything of dust properly, just to be sure.When I turn everything down, the temperature goes down again, but it stops arround 55°C, which i'd say seems pretty normal like it was when the usage was normal as well, but the usage of core 0 never goes down to 3-4% of usage again until reboot. the temperature will.I hope this is good enough.Will glady try anything else or will go more into detail. Edited October 9, 2013 by spotak2 Link to comment Share on other sites More sharing options...
MagicAndre1981 Posted October 10, 2013 Author Share Posted October 10, 2013 try loading th default UEFI/BIOS settings. If nothing helps phone the ASUS support. I saw the same issue with ASUS laptops here several times, but we never found a real solution. Link to comment Share on other sites More sharing options...
spotak2 Posted October 10, 2013 Share Posted October 10, 2013 try loading th default UEFI/BIOS settings. If nothing helps phone the ASUS support. I saw the same issue with ASUS laptops here several times, but we never found a real solution.Well I don't think it will help, because it was doing right after format. It is kinda weird But when I first bought the NTBk it was fine... so I am afraid it mighr be coz of some hardware issue :/ Link to comment Share on other sites More sharing options...
MagicAndre1981 Posted October 10, 2013 Author Share Posted October 10, 2013 I've seen this issue with this laptop before, but as I said we never found a solution. Link to comment Share on other sites More sharing options...
spotak2 Posted October 10, 2013 Share Posted October 10, 2013 I've seen this issue with this laptop before, but as I said we never found a solution.I have called to the asus support today and it sounded like they had no clue what am I talking about I sent the specifics by email and they replyied that they dont know, and I should send my notebook in ... I am afraid itwill be a fortune.... Link to comment Share on other sites More sharing options...
MagicAndre1981 Posted October 10, 2013 Author Share Posted October 10, 2013 try to remove Power4Gear and any other ASUS tools. Does this help? Link to comment Share on other sites More sharing options...
spotak2 Posted October 10, 2013 Share Posted October 10, 2013 (edited) try to remove Power4Gear and any other ASUS tools. Does this help?Well I don't wanna call it prematuraly BUT it seems uinstaling ATKEY asus tool worked Don't know why, but I installed ot coz of Fn button and it never occured to me it might be cousing this So far so good, if anything changes I will let you know but so far it works!!Thank you Andre for your time, patience and good heart... and F You asus support EDIT: Ok, so it is back even without the drivers... but it took it like an hour of playing to come back... so I am really confused now. Edited October 11, 2013 by spotak2 Link to comment Share on other sites More sharing options...
MagicAndre1981 Posted October 11, 2013 Author Share Posted October 11, 2013 I have no real idea Link to comment Share on other sites More sharing options...
spotak2 Posted October 12, 2013 Share Posted October 12, 2013 I have no real ideaNevermind. I still THANK YOU very much for time and effor you have put into this. Link to comment Share on other sites More sharing options...
Evan20x Posted November 7, 2013 Share Posted November 7, 2013 Hello MagicAndre. If it's not too much to ask I would like for you to take a quick gander at my system interrupts thread over on corsair forums.I have no where else to turn with this problem because Corsair has given no more support after their replacement USB dongle did not solve the problem.http://forum.corsair.com/v3/showthread.php?t=116277If I could just get your 2 cents on it I would be greatly appreciative and if there is anything else you need me to provide I would gladly do so. Thanks. Link to comment Share on other sites More sharing options...
MagicAndre1981 Posted November 7, 2013 Author Share Posted November 7, 2013 Run the xperf commands and upload the ETL file Link to comment Share on other sites More sharing options...
JoRJa Posted November 10, 2013 Share Posted November 10, 2013 Hello MagicAndreI have build up custom PC especially for learning electronic music creation. But after setup my rig, there was some annoying pops and crackles in sound. About month I'm trying to figure out how to solve this problem. I've made some research and tested my system with LatencyMon, dpclat, xperf, gpuz, read many topics and articles about DPC issues, but unfortunately most people who are struggling with this problem can't solve it. I have contacted to Native Instruments Support (my sound interface issuer), made some tweaks and advanced configs, but crackles in sound doesn't disappear. Then I've tried to disable devices one by one, and found that without display adapter, it works better but after several minutes, crackles was heard again. NI support team said that it is GPU issuer fault, and I must buy another one or try to change NVIDIA drivers. I have made clean install of updated NVIDIA drivers, several older version drivers but no results. My last chance is to buy another video card and along with item price I don't know will it work better or worse. Shortly, all I have left is some advices by experienced users and I really believe that every task has a solution.Specs:Mobo: ASUS Sabertooth X-58CPU: Intel Core i7 950 3.06GHz LGA 1366Video: EVGA GeForce GTS450 1GB SuperClockedMemory: Kingston 6GB (KVR400X64C3A)HDD1: Seagate Barracuda 2TB (ST2000DM001) HDD2: Seagate Barracuda 1TB (ST3100528AS) PSU: Corsair TX650W (CMPSU-650TX)Sound Interface: NI Komplete Audio 6Actions that I've made:1. Updated all drivers that i have, including motherboard, graphics card, bios, device firmware and control panel2. re-arranged system components for fixing IRQ conflicts3. Disabled CPU TM Function and Intel® SpeedStep ™ Tech in BIOS4. Disabled Power Savings for CPU, GPU (via EVGA PrecisionX) and USB components5. Tried all of the usb ports for sound interface6. Disabled one-by-one each device via Device Manager 7. Performed a Clean Boot8. Switched from Windows XP SP3 from Windows 7 x86, and now it's Windows 7 x64 (x64 works better among them)9. Updated .sys files with Windows6.1-KB2529073-x64 but in xperf and LatencyMon it shows older versions of USB drivers. When I go to system32 and watch the versions of files, they're up to date. I don't know why xperf and LatencyMon generates wrong data.10. Changed Process Buffer and USB Buffer Size from Komplete Audio 6 Control PanelIf PC is turned on for several hours (sometimes it takes only several minutes) and I'm running as normal Mozilla Firefox (Youtube or Facebook), Gom Player or DAW after pops and crackles sound little by little slows, it's sounds like robotic scary voice. if i will change USB Buffer from 4ms to 2ms it will sound from robotic sound to normal, with rare occasions of noises. After, it will slow everything in my system, sometimes only way to make it work is reboot os. Mouse/Keyboard freezes, Typing/Deleting strings is slowed in text editor, sometimes i get BSODs, sometimes screen turns off and then renews with notifications from NVIDIA - "Display driver stopped respoding and has recovered". I think issue is GPU related, but not sure. Maybe you can figure out whats the culprit.Your help would be greatly appreciated!Sincerely Link to comment Share on other sites More sharing options...
MagicAndre1981 Posted November 10, 2013 Author Share Posted November 10, 2013 the trace shows a high CPU usage caused by USBPORT.SYS: CPU 0 Usage, CPU 1 Usage, CPU 2 Usage, CPU 3 Usage, CPU 4 Usage, CPU 5 Usage, CPU 6 Usage, CPU 7 Usage, usec %, usec %, usec %, usec %, usec %, usec %, usec %, usec %, Module 1085 0.00, 0 0.00, 829 0.00, 0 0.00, 925 0.00, 23614411 7.83, 562062 0.19, 0 0.00, USBPORT.SYSTo which USB port do you connect the Komplete Audio 6 WDM Audio device? Make sure no other USB devices are connected to the same controller. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now