Jump to content

Ask your Seven xml ? here

maxXPsoft
 Share

Recommended Posts

Tomorrow

Tomorrow

Posted
Posted

Why doesent the powercfg setting work?

http://technet.microsoft.com/en-us/library/cc749019(v=ws.10)

I pre set to high performance but after install it's still Balanced. I checked the GUID's on a fresh install via powercfg -list and these were correct. 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c was the high performance scheme and i have this in my .xml under Microsoft-Windows-Shell-Setup:

<component name="Microsoft-Windows-powercpl" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
        	<PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
    	</component>


maxXPsoft

maxXPsoft

Posted
  • Author
Posted (edited)

Why doesent the powercfg setting work?

Never has worked not even in Vista

I just use a Powerplan.cmd I run at Firstlogoncommands

REM        Adding Powerplan
POWERCFG -SETACTIVE 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c
REM    ALL TO 120 minutes time and you can change.
POWERCFG -X -monitor-timeout-ac 120
POWERCFG -X -disk-timeout-ac 120
POWERCFG -X -standby-timeout-ac 120
REM  or hibernate OFF
POWERCFG -H OFF

Edited by maxXPsoft
Tomorrow

Tomorrow

Posted
Posted (edited)

Ah i see. Also can i request an UEFI version of the previously posted xml that creates the nessesary partitions?

Not that im expecting to run UEFI based image in VirtualBox any time soon (atleast not windows), but it would be nice to have the code handy. UEFI setup creates one extra partition so the partition order looks like this:

Part1: 128MB (MSR)

Part2: 100MB (System)

Part3: (Windows)

GPT Conf

Edited by Tomorrow
maxXPsoft

maxXPsoft

Posted
  • Author
Posted (edited)

Your link already shows how to do it or unattend.chm covers this

I have a OEM UEFI capable personal home PC. I have formatted it and reinstalled normally

1. OEM junkware had C drive over 26gb

2. 2 TB C: drive is like the most ridiculous thing to me.

When I tried EFI have had problems with it like not able to boot to F8 'Repair your Computer' even with a created EFI boot disk. Added a SSD and I get about BootTime 17945 ms so have wondered if there would be any advantage to switching it over.

I may try again today unless something comes up. If it works then I'll have a xml from an actual

EDIT: This was the problem I encountered last EFI I tried

This version of System Recovery Options is not compatible with the version of Windows you are trying to repair.

I searched high and low for a week and finally came across an answer that said something about extra Drives would cause error's

All I done was disable USB Floppy and USB Hard Drive in UEFI options in bios.

Recovery DVD would then work

Edited by maxXPsoft
maxXPsoft

maxXPsoft

Posted
  • Author
Posted (edited)

Create UEFI partitions. Save as AutoUnattend.xml attached to First post

Created xml same way as your link Sample: Configure UEFI/GPT-Based Hard Drive Partitions by Using Windows Setup

as usual MS screws things up.

Right off I could see where they were <InstallTo> Partition 3 was wrong. Can't install to a <Size>128</Size> mb disk

I booted with xml on usb and it parsed xml and crashed on <ModifyPartitions>

I could tell from Panther/setupact.log it was getting first 2 entries but not third.

It said <!-- MSR partition does not need to be modified --> so why are they adding it? hmm. I remarked out whole thing and changed 4th partition <Order>4</Order> to a 3

Bingo it ran and finished.

I wasn't happy cause I wanted a full GPT disk and hide the recovery partition so I booted with a txt file on usb and removed <DiskConfiguration> from my xml and named to .bak

I ran the Diskpart commands to create all the partitions

I hit Shift and F10 and CD to my USB and ran Notepad opening the file and paste them into the command prompt. Then renamed xml and rebooted. it completed with no errors

So now I have a GPT UEFI setup but right now it is slower than it was. SSD takes a few days to tweak itself.

These are the DISKPART commands.

DISKPART
SELECT DISK 0
CLEAN
CONVERT GPT

CREATE PARTITION PRIMARY SIZE=250
SET ID="de94bba4-06d1-4d40-a16a-bfd50179d6ac"
FORMAT QUICK FS=NTFS LABEL="Recovery"
ASSIGN LETTER="R"

CREATE PARTITION EFI SIZE=100
FORMAT QUICK FS=FAT32 LABEL="System"
ASSIGN LETTER="S"

CREATE PARTITION MSR SIZE=128

CREATE PARTITION PRIMARY
FORMAT QUICK FS=NTFS LABEL="SE7EN"
ASSIGN LETTER="C"

EXIT

Edited by maxXPsoft
  • 2 weeks later...
Lucius_Snow

Lucius_Snow

Posted
Posted

Hello all,

Does anybody know how to skip the reboot progress bar with the 10 seconds ? I can't find any entry for this into "autounattend.xml"

Thanks !

maxXPsoft

maxXPsoft

Posted
  • Author
Posted

Way back with early XP i was sitting there one day and clicked the Restart button and on reboot it BSOD. From that day forward I'll wait it out. :w00t:

Probably have to hack a dll. Don't think it is nowhere in xml settings.

MrJinje

MrJinje

Posted
Posted

Has anyone seen a barebones template for Windows 8 anywhere. Not looking for fancy, looking for generic so I can refer people here from social.technet.

What do you think Max, should we send W8 people to this thread, would you host the XML's in the first post. My guess is 90% of their questions are gonna already be answered in this thread.

maxXPsoft

maxXPsoft

Posted
  • Author
Posted (edited)

Has anyone seen a barebones template for Windows 8 anywhere. Not looking for fancy, looking for generic so I can refer people here from social.technet.

What do you think Max, should we send W8 people to this thread, would you host the XML's in the first post. My guess is 90% of their questions are gonna already be answered in this thread.

I have one picked up from LiveFreeDead. I can add link to first post but I'll show it here cause it does some interesting things to

Enable FirstLogon As Admin

Comp Flags for setupcomplete.cmd

Windows 8 xml is almost exactly same as Win 7. Some things changed

Example Windows 8 xml. Download Link in first post here

Technet - You'll notice some new stuff in <OOBE>

<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>en-US</UILanguage>
            </SetupUILanguage>
            <InputLocale>en-US</InputLocale>
            <UserLocale>en-US</UserLocale>
            <UILanguage>en-US</UILanguage>
            <SystemLocale>en-US</SystemLocale>
        </component>
        <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <UserData>
                <AcceptEula>true</AcceptEula>
                <ProductKey>
                    <Key>XXXXX-XXXXX-XXXXX-XXXXX-XXXXX</Key>
                    <WillShowUI>OnError</WillShowUI>
                </ProductKey>
                <Organization>Home</Organization>
                <FullName>Computer</FullName>
            </UserData>
        </component>
    </settings>
    <settings pass="specialize">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <ComputerName>PCNAME</ComputerName>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
                <RunSynchronousCommand wcm:action="add">
                    <Order>3</Order>
                    <Description>Enable FirstLogon As Admin</Description>
                    <Path>reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Layers" /v "%WINDIR%\Setup\Scripts\FirstLogon.cmd" /t REG_SZ /d "RUNASADMIN" /f</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>4</Order>
                    <Description>Comp Flags for setupcomplete.cmd</Description>
                    <Path>reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Layers" /v "%WINDIR%\Setup\Scripts\setupcomplete.cmd" /t REG_SZ /d RUNASADMIN /f</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Description>Enable Admin Account</Description>
                    <Order>5</Order>
                    <Path>net user administrator /active:yes</Path>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <AutoLogon>
                <Enabled>true</Enabled>
                <LogonCount>1</LogonCount>
                <Username>Administrator</Username>
            </AutoLogon>
            <FirstLogonCommands>
                <SynchronousCommand wcm:action="add">
                    <Description>Post Setup OEM</Description>
                    <Order>100</Order>
                    <CommandLine>cmd /c %WINDIR%\Setup\Scripts\FirstLogon.cmd</CommandLine>
                </SynchronousCommand>
            </FirstLogonCommands>
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
                <NetworkLocation>Home</NetworkLocation>
                <ProtectYourPC>1</ProtectYourPC>
                <HideOnlineAccountScreens>true</HideOnlineAccountScreens>
                <HideLocalAccountScreen>true</HideLocalAccountScreen>
                <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
            </OOBE>
            <TimeZone>Tasmania Standard Time</TimeZone>
            <UserAccounts>
                <LocalAccounts>
                    <LocalAccount wcm:action="add">
                        <Description>Default Administrator Account</Description>
                        <DisplayName>Administrator</DisplayName>
                        <Group>Administrators</Group>
                        <Name>Administrator</Name>
                    </LocalAccount>
                </LocalAccounts>
            </UserAccounts>
        </component>
        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>en-AU</InputLocale>
            <SystemLocale>en-AU</SystemLocale>
            <UILanguage>en-AU</UILanguage>
            <UILanguageFallback>en-US</UILanguageFallback>
            <UserLocale>en-AU</UserLocale>
        </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:f:/build8/win8x64/sources/install.wim#Windows 8 Pro" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

Edited by maxXPsoft
myselfidem

myselfidem

Posted
Posted

Way back with early XP i was sitting there one day and clicked the Restart button and on reboot it BSOD. From that day forward I'll wait it out. :w00t:

Probably have to hack a dll. Don't think it is nowhere in xml settings.

I agree with you maxXPsoft, and yes it's needed to hack a dll.

Regards

MrJinje

MrJinje

Posted
Posted (edited)

Thanks Max. I ripped out the stuff I didn't like, made it en-US across the board and put it to Chicago time. Readers just need to search for "EDIT" and make minor changes. I've tested the x86 version in a VM and it worked for me.

Windows 8 - x86

<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>en-US</UILanguage>
            </SetupUILanguage>
            <InputLocale>en-US</InputLocale>
            <UserLocale>en-US</UserLocale>
            <UILanguage>en-US</UILanguage>
            <SystemLocale>en-US</SystemLocale>
        </component>
        <component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <UserData>
                <AcceptEula>true</AcceptEula>
                <ProductKey>
                     <Key>XXXXX-XXXXX-XXXXX-XXXXX-XXXXX</Key>                                               
                     <WillShowUI>OnError</WillShowUI>
                </ProductKey>
                <Organization>EDIT</Organization>
                <FullName>EDIT</FullName>
            </UserData>
        </component>
    </settings>
    <settings pass="specialize">
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <ComputerName>EDIT</ComputerName>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
                <RunSynchronousCommand wcm:action="add">
                    <Description>Enable Admin Account</Description>
                    <Order>1</Order>
                    <Path>net user administrator /active:yes</Path>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
                <HideLocalAccountScreen>false</HideLocalAccountScreen>
                <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
                <HideOnlineAccountScreens>false</HideOnlineAccountScreens> 
                <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
                <NetworkLocation>Home</NetworkLocation>
                <ProtectYourPC>3</ProtectYourPC>             
            </OOBE>
            <TimeZone>Central Standard Time</TimeZone>
            <UserAccounts>
                <LocalAccounts>
                    <LocalAccount wcm:action="add">
                    <Password>
                        <Value>EDIT</Value>
                        <PlainText>true</PlainText>
                    </Password>
                        <Description>Default Administrator Account</Description>
                        <DisplayName>Administrator</DisplayName>
                        <Group>Administrators</Group>
                        <Name>Administrator</Name>
                    </LocalAccount>
                </LocalAccounts>
            </UserAccounts>
        </component>
        <component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UILanguageFallback>en-US</UILanguageFallback>
            <UserLocale>en-US</UserLocale>
        </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:f:/build8/win8x64/sources/install.wim#Windows 8 Pro" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

Windows 8 - amd64

<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>en-US</UILanguage>
            </SetupUILanguage>
            <InputLocale>en-US</InputLocale>
            <UserLocale>en-US</UserLocale>
            <UILanguage>en-US</UILanguage>
            <SystemLocale>en-US</SystemLocale>
        </component>
        <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <UserData>
                <AcceptEula>true</AcceptEula>
                <ProductKey>
                     <Key>XXXXX-XXXXX-XXXXX-XXXXX-XXXXX</Key>                                               
                     <WillShowUI>OnError</WillShowUI>
                </ProductKey>
                <Organization>EDIT</Organization>
                <FullName>EDIT</FullName>
            </UserData>
        </component>
    </settings>
    <settings pass="specialize">
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <ComputerName>EDIT</ComputerName>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
                <RunSynchronousCommand wcm:action="add">
                    <Description>Enable Admin Account</Description>
                    <Order>1</Order>
                    <Path>net user administrator /active:yes</Path>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
                <HideLocalAccountScreen>false</HideLocalAccountScreen>
                <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
                <HideOnlineAccountScreens>false</HideOnlineAccountScreens> 
                <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
                <NetworkLocation>Home</NetworkLocation>
                <ProtectYourPC>3</ProtectYourPC>            
            </OOBE>
            <TimeZone>Central Standard Time</TimeZone>
            <UserAccounts>
                <LocalAccounts>
                    <LocalAccount wcm:action="add">
                    <Password>
                        <Value>EDIT</Value>
                        <PlainText>true</PlainText>
                    </Password>
                        <Description>Default Administrator Account</Description>
                        <DisplayName>Administrator</DisplayName>
                        <Group>Administrators</Group>
                        <Name>Administrator</Name>
                    </LocalAccount>
                </LocalAccounts>
            </UserAccounts>
        </component>
        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UILanguageFallback>en-US</UILanguageFallback>
            <UserLocale>en-US</UserLocale>
        </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:f:/build8/win8x64/sources/install.wim#Windows 8 Pro" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>

EDIT: Added skip auto activation to specialize pass for preserving readers MAK keys. I'll need to double check the oobe, there might be a few useless settings in this, work in progress

Edited by MrJinje
  • 4 weeks later...
Octopuss

Octopuss

Posted
Posted

Question:

<ProtectYourPC>, what exactly do the settings do?

I know which popup it is and what the values are, but it's not exactly clear what they do.

1 Specifies the recommended level of protection for your computer.

2 Specifies that only updates are installed

3 Specifies that automatic protection is disabled.

blabla... What in the hell is recommended level of protection? What's automatic protection?

Tripredacus

Tripredacus

Posted
Posted

blabla... What in the hell is recommended level of protection? What's automatic protection?

It picks from the 3 Update options in OOBE. I can't find a good picture of it, but it is equivalent to "Install Updates Automatically (Recommended)" option in the "Choose how Windows can install updates" page in Control Panel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...