morty Posted June 26, 2008 Share Posted June 26, 2008 Hello I have recently bought a new 320GB HDD and want to put XP on so I am using nlite to try and create a disk that is bootable with SP3 on it however when it all appers to work fine and the .iso is created and burned to a DVD no problem however when I am asked for the product key (in the XP installation, I can get that far ) i type the product key as stated on the yellow product code label but installer tells me that "The CD Key Which You Entered Is Invalid. Please Try Again." what have i done wrong??? Please help me I have tried several times now but to no avail Many Thanks Morty! P.S. I'm new around here so hello all! Link to comment Share on other sites More sharing options...
Volatus Posted June 26, 2008 Share Posted June 26, 2008 Kinda sounds like you were a victim of "printed piracy"...Might want to take a look at this:http://www.microsoft.com/resources/howtotell/windows/Each SP has a list of keys that it knows are pirated copies... did you get your XP from a big store, or a little mom-n-pop shop? Link to comment Share on other sites More sharing options...
JedMeister Posted June 26, 2008 Share Posted June 26, 2008 I suggest you take it back where you got it from and ask them about it. If they won't give you any joy or thats not an option get in touch with MS. Or perhaps just get in touch with MS anyway. Link to comment Share on other sites More sharing options...
morty Posted June 26, 2008 Author Share Posted June 26, 2008 sorry I may not have made it clear that the CD Key works when i put the original cd in and i have installed XP using the original cd many times using the CD key however now that I am trying to slipstream SP3 into it and make it a .iso that has to be put onto another cd - i went with dvd (is that important?) only when using this new cd does the cd not work what havce i done wrong? Link to comment Share on other sites More sharing options...
mara- Posted June 26, 2008 Share Posted June 26, 2008 You did not tell on which Windows you are doing slipstream. If you do it on Vista that is probably cause of your problem. Try to do slipstream on XP.Cheers Link to comment Share on other sites More sharing options...
morty Posted June 26, 2008 Author Share Posted June 26, 2008 Yes I am currently running vista off this computer so I need to be running XP in order for this to work would windows 98 do? Link to comment Share on other sites More sharing options...
Walchinc Posted June 26, 2008 Share Posted June 26, 2008 (edited) Please nrever use any other software because this makes a mess during installation of xp. Even MS confirmed this. Use integrated switches to slipstream SP3.Here it is http://support.microsoft.com/kb/950722 Edited June 26, 2008 by Walchinc Link to comment Share on other sites More sharing options...
TheFlash428 Posted June 26, 2008 Share Posted June 26, 2008 Yes I am currently running vista off this computer so I need to be running XP in order for this to work would windows 98 do?Yes--there have been documented errors concerning slipstreaming SP3 on a host box running vista. I thought that nLite had fixed that, but maybe not. I've never tried to do it on a vista computer before. Link to comment Share on other sites More sharing options...
Volatus Posted June 26, 2008 Share Posted June 26, 2008 (edited) Please nrever use any other software because this makes a mess during installation of xp. Even MS confirmed this. Use integrated switches to slipstream SP3.Please nrever spread bad or incorrect information... nLite does a better job at everything than MS could ever even imagine doing. Don't hate. In fact, the slipstream method MS recommends isn't even used for making a CD (since, obviously, MS never wants people to burn a Windows CD), it's used to "update" an "installation share". nLite does a better job at actually making it a CD.edit: That KB article you linked ISN'T EVEN RELATED to the post you wrote... but it's probably the solution to this problem... could you at least have said that instead of dissing nLite? Edited June 26, 2008 by Volatus Link to comment Share on other sites More sharing options...
TheFlash428 Posted June 26, 2008 Share Posted June 26, 2008 Please nrever use any other software because this makes a mess during installation of xp. Even MS confirmed this. Use integrated switches to slipstream SP3.Please nrever spread bad or incorrect information... nLite does a better job at everything than MS could ever even imagine doing. Don't hate. In fact, the slipstream method MS recommends isn't even used for making a CD (since, obviously, MS never wants people to burn a Windows CD), it's used to "update" an "installation share". nLite does a better job at actually making it a CD.edit: That KB article you linked ISN'T EVEN RELATED to the post you wrote... but it's probably the solution to this problem... could you at least have said that instead of dissing nLite?OK, so to update this even more, I just looked on the nLite website, and as long as you are using at least v.1.4.5 you should be OK, as nLite claims the problem was fixed. Note that it says that if your using Vista as your host and your using an RTM version (aka "gold"/aka no service packs), you must slipstream SP2 first before slipstreaming SP3. If you've done all that and still have issues, you may want to check the nLite forum, or try to make the CD using an XP host. Link to comment Share on other sites More sharing options...
Walchinc Posted June 28, 2008 Share Posted June 28, 2008 Please nrever use any other software because this makes a mess during installation of xp. Even MS confirmed this. Use integrated switches to slipstream SP3.Please nrever spread bad or incorrect information... nLite does a better job at everything than MS could ever even imagine doing. Don't hate. In fact, the slipstream method MS recommends isn't even used for making a CD (since, obviously, MS never wants people to burn a Windows CD), it's used to "update" an "installation share". nLite does a better job at actually making it a CD.edit: That KB article you linked ISN'T EVEN RELATED to the post you wrote... but it's probably the solution to this problem... could you at least have said that instead of dissing nLite?OK, so to update this even more, I just looked on the nLite website, and as long as you are using at least v.1.4.5 you should be OK, as nLite claims the problem was fixed. Note that it says that if your using Vista as your host and your using an RTM version (aka "gold"/aka no service packs), you must slipstream SP2 first before slipstreaming SP3. If you've done all that and still have issues, you may want to check the nLite forum, or try to make the CD using an XP host.Well with 20 years experience in this field and a computer programmer at degree level. I have integrated SP3 into all XP discs with command line switches Link to comment Share on other sites More sharing options...
muryot Posted June 28, 2008 Share Posted June 28, 2008 nothing wrong with nlite.just ignore that boastful person. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now