Search the Community
Showing results for tags 'WinSetupfromUSB'.
Found 3 results
-
Trying to install 32bit XP using WinSetupfromUSB. The system will boot the USB as a USB-ZIP but WinSetupfromUSB won't get past the "start part 1 menu" so I have installed plop into the MBR on the HDD, and find the USB using UHCI on Host4, Port1. HDD is SATA but bios emulates it as IDE, I don't seem to have any control over this. WinSetupfromUSB freezes after shifthd.bat. Before shifthd.bat (hd0) 0x80 is the USB, (hd1) 0x81 is the HDD, but after shifthd.bat (hd0) is still the USB and (hd1) seems to be no longer mapped. I'm still trying to learn grub4dos, but got the above information by adding geometry commands to winsetup.lst. On screen dialog: starting setup part 1 error occurred while savedefault 0x80: .... USB 0x81: .... HDD It seems plop has been loaded found 2 disks, set USB hd1 0x80: ... USB freezes I'm at a loss what to do now, any help appreciated. P.S. there is an 8MB block at the start of the USB, is this normal? -
Oh kay-- here we go again, I have a (HP) Compaq 6710 with160gb HDD (Sata), Single Partition of 147gb, 8gb Ram, Intel Duo Core running (Or was running) XP-Pro sp3 (x86) Now the HDD Bootsector and MBR is totally corrupted. It boots to the Bios then stops proclaiming the Boot Manager is missing. Well this in tiself should'nt be to hard right??! Wrong! I have a Dell with Windows 7 "64 BIT" as an aide for searching and downloading solutions for the XP. And after all the claims and fan-fare about how good someones burner is and how "EASY" it is to use their programs, files, and ingenious bull...t ways to con you into some obscure download you don't want but accept anyways because you need some file or such and besides i have nothing better to do than spend a day or two in Control Panel\Add remove Programs Section when the crying is all over. I thought i found "THEE" solution. Now during all this i"ve dealt with the 64 to 32bit issue and vice-versa for sometime now needless to say. I only have managed to get this thing to boot to Command Prompt with a copies of Windows 7 64 bit BootMgr and an XP-Pro SP-2 64 bit. (No my XP is NOT a 64 bit OS) and if i let it go beyond the Command prompt option it goes to Blue screen on Win 7, and freezes with XP SP2. As stated earlier (LOL) i thought i had the answer to the major issues (Bootsect--MBR--Partitions) with WinSetupFromUSB which boasts it supports both 64 and 32. Now after playing with Komku and Imgburn and various .iso, Torrent, and .zip files WintoUSB sounded pretty good. UNTIL you want to copy the 7z files needed on a XP FAT formatted 4gb USB stick in the 64 bit Dell, copy those to the XP Command Prompt extract them there to get WinsetupfromUSB.exe file, reformat the drive etc, blah blah. Then to end all when i finally get a file snuck thru and ready to execute i get "The subsystem needed to support the image type is not present" on the XP side of things and when i select a 32 bit app to download on the Dell to the 32 bit USB stick i get something like "This is not the right format for your OS" I can usually work around this one but what i need i'm guessing is some script or the like to invoke the programs once i successfully get them to the XP. Right now all i can access right now is the command prompt and a very basic Notepad, all of which is running in "Safe-Mode", although i can invoke the CMD /a option and sometimes a "Run as Admin", but that just shoots the program to Notepad in Hexidecimal. As i see it i think i have to gain access the Partition and Bootsectors alignment files. Any and all input would most appreciated The Beave.
-
Trying to put XP on hp mini 311 netbook ..choosing option 1 or 2...at least sata drive is recognized which is further than I got before... I choose the partition...all seems well...setup is starting... Then I am prompted to "insert the disk labeled dpms chennel etc...press enter or f3 to quit...pressing enter does nothing... I don't know why it's prompting for the drivers when they obviously were detected in the first step... I'm lost
