Carillo Gallardo

Hi guys, same error here! I have Vista x32 in english plus italian mui and i get the same error when i try to install vista. Without the mui everything goes fine... Byezzz

Hi guys, is it possible to modify this pack to make it slipstreamable using nlite or the original installer as xpize? I've tried replacing the xpize source's resources with those extracted from the energize installer and then repacking the modified xpize source but, for some reasons, i'm not able to include in it all the new resources that in some cases are more than those from xpize... Maybe this is linked to the nullsoft scripts but i'm not very expert so i don't know... Byezzz

Those squares are normal, i get them in XPreview also with the original Antonio's blue winntbbu but they don't appear during windows setup. Byezzzzz

This is not a bootscreen but a new setup screen...

Hi guys! I've created a new WINNTBBU to better fit XPize Darkside. More information here --> WINNTBBU Dark Byezzzzzz

Hi guys! I've created a new WINNTBBU dark to better fit the new XPize darkside... This work is based on the Antonio King's WINNTBBU without logo, i've simply replaced some bitmap resources, so the most important work was done by Antonio and all the credits should go to him. This is a screenshot from jcarle's XPreview... ...and this is the download link: WINNTBBU-Dark.7z Byezzzzz

I've tried it and it works so good! Thanks Boooggy, great work as always!

1.70 is out and the "-makeunattended" switch that doesn't work in 1.69 now is fixed and works great (i've tried it with my own addon).

Thanks Kels, i'll try, but i've always used that addon and it always works... Anyway, i'll try! EDIT: Ok, i've solved the ngen problem by installing .net framework in runonce (RyanVM's aio pack) and so removing it as svcpack addon. Now it's ok, but i still get all the other errors... Anyway, now i'm closer to perfection (and to the madness...)!

This is not a reg tweak, it's a command you could run also by "Start\Run...". To make it unattended i've added it in a batch file that i've created to clean and remove some stuffs during windows setup and that i've converted in a svcpack addon with nlite addon maker.

No ideas guys? This problem is driving me crazy... More details (don't now if connected to ngen or not): 1- i get this error at the end of t-13 stage, if i click the "OK" button after few seconds setup continues to t-12 stage... 2- all the addons in "svcpack.inf" were correctly installed... 3- only some "inf addons" were installed and not completely (for example some reg entries were not installed)... 4- during windows startup the screen resolution was setted up wrong and very low, not at 1024x768... 5- during windows startup i get an error that says that some services or drivers failed to start but all drivers were correctly installed and just because of that error i remove only few services with nlite, using compatibility mode to not remove core services and everything always has worked... until now... 6- setuperr.log is not blank: Error: Setup could not register the OLE Control C:\WINDOWS\system32\userenv.dll because of the following error: DllInstall returned error 2147746132 (80040154). I'll do other experiments...

Have you slipstreamed also Internet Explorer 7? I got this problem time ago and if i remember correctly the cause was IE7... I solved it by this: reg delete HKCU\Software\Microsoft\Windows\CurrentVersion\Run /f /v CTFMON.EXE

Take a look to this part of your Last Session.ini: ;# Operating System Options # Blaster/Nachi removal tool Manual Install and Upgrade Tour You have removed "Manual Install and Upgrade" and this is the cause of your problem. In nLite check the description of this component and you will see that it removes the files that you need. Byezzzzzzzz

Have you tried without removing components from hardware support section? Maybe that "CPU Intel". This is only a supposition, i've never gotten that error. Byezzzz

Hi guys, have you ever seen this kind of error? I cannot understand which is the application that causes it, but this problem appears both in RC2 and Final nLite versions... So the problem it's connected to my preset. Could someone help me? Thanks Test1.ini

Ok, here it is my last session for you! Thanks for your help! LAST_SESSION.INI

@ricktendo64: the filesize of my DBGHELP.DLL is 650kb and it's the same of the unmodified one. Looking at the log files in my Windows folder after the installation i've noticed some strange things in SETUPAPI.LOG... Look at this: #W334 Failed to verify catalog when scanning file queue. Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\clusocm.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\multimed.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\accessor.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\wmp11ext.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\runtimes.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\sidebar.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\7zip.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\absolut.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\aveicon.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\ccleaner.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\cplbonus.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\dvddcrpt.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\dvdshrnk.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\exchamap.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\freegame.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\gadinst.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\uberpack.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\lrlclock.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\wmplyric.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\gencheck.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\neavgame.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\nirsoft.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\nlaom.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\nlite13f.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\note.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\reshack.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\sta3x.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\gamegads.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\sysinter.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\unixtrac.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\ussf.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\tasktips.inf" will be installed (Policy=Ignore). Error 1168: Element not found. #W361 An unsigned, incorrectly signed, or Authenticode(tm) signed file "f:\windows\inf\wb51enh.inf" will be installed (Policy=Ignore). Error 1168: Element not found. I've no idea of what's the cause of all of this, but now i wanna try to use nLite rc2 with the same source and the same preset. Maybe i could understand something more... Maybe... Thank you Rick for your interest! EDIT: Ok, same problems also with RC2...

Hi all, ok, i still need to do some more experiments so i cannot give you more details, but with these new nLite final versions (with rc2 everything works fine) seems that inf addons (like Kels cpl and uber packs, or Ricks ccleaner and others) cannot install during my windows 2k3 setup. Integration works perfectly and all the files were placed in my final iso but simply they weren't installed. Only the installation of svcpack addons works great. Have someone of you guys noticed the same problem? Thank you, byezzz ps.Thank you Nuhi for your great work!!!

Hi Boooggy, firstly i want to thank you for your great works! I've used all of them, the Wmp11 addons and also the Wmp11 Slipstreamer and every time they worked very well! So great job!!! Now the bad thing... For my new nLited Windows (english Windows 2003 Sp1 Standard Edition) i want to use your Wmp11 Slipstreamer. I've already used it (version 0.3) for my last test and it worked so good but now that i'm trying to close my project with your new 0.62 version, when i click on the "Integrate" button i get this error: If i click on the "Details" button it shows me this: See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: startIndex at System.Globalization.CompareInfo.IndexOf(String source, String value, Int32 startIndex, Int32 count, CompareOptions options) at System.Globalization.CompareInfo.IndexOf(String source, String value, Int32 startIndex) at WMP11Slipstreamer.MainGUI.checkEssentialFiles(String sFolder) at WMP11Slipstreamer.MainGUI.DoTheIntegration() at WMP11Slipstreamer.MainGUI.buttonIntegrate_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.42 (RTM.050727-4200) CodeBase: file:///F:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll ---------------------------------------- WMP11Slipstreamer Assembly Version: 0.0.6.2 Win32 Version: 0.0.6.2 CodeBase: file:///F:/Program%20Files/WMP11%20Slipstreamer/WMP11Slipstreamer.exe ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.42 (RTM.050727-4200) CodeBase: file:///F:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.42 (RTM.050727-4200) CodeBase: file:///F:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.42 (RTM.050727-4200) CodeBase: file:///F:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. The system that i'm using now is a nLited english Windows XP Professional Sp2, but i've tried to use your slipstreamer also with a normal italian Windows XP Professional Sp2 but it doesn't work... My Win2k3 source is clean and not modified at all. I've tried with safe mode but nothing. I've searched on google trying to understand if that problem is caused by my computer and i've tried to resolve it by myself but without success... I think that it's too hard for my skills... So, could you help me please? And sorry for the long post... Thanks, byezzz ---SOLVED--- The error was caused by my Win2K3 source, that was clean from nLite but corrupted by some reason that i cannot understand (maybe copying error...). Now the slipstreamer works like a charm!!! Byezzz