valexvo

Sorry , but for me is not working. The main windows is present but when I click begin install , nothing happens and the usual install window is gone. I use the old config.js from 5.5. I'm missing something? any help apreciated regards alex

Hi, Don't know if allready posted but here is link for vlite. Is similar but not finished as nlite for XP. "http://www.vlite.net/" hope it helps regards alex

Same problem here with nvidia NF3 . Solved "some way" : First boot in safe mode then everithing's ok. Maybe with this hint, somebody can find a better solution. alex

I have an unattended Xp sp3 cd made by another person (amit) but it's striped down. I want to reinsert the original MS modem drivers, but I don't know how. Please give some ideas on how to reinsert these drivers without to reconstruct the whole cd. It is possible? any help apreciated. THX. regards alex

Hi, Same prob here and I have make a dual boot cd : 1. Boot into 7tools Partition manager 2. Boot into WinXP cd 3. boot from HDD, wich is default and with 5 sec timeout works fine regards alex

Hi!, I was using WinIso , but it has some limitations : sometime gives me errors when I use "Save as" and has serios limitation concerning LFN (MS manifests etc..) Now I use CdImage that have a very nice GUI (I hate command line) and UltraIso. regards alex

@ AaronXP As I promised here's the two batch: sp2_patch.bat echo. echo This will install Windows XP Service Pack 2 Hot fixes. Press any key to continue or press Ctrl-C to exit patch. echo. echo When system ask you to restart computer, select No to continue patching and restart computer when this dialog has been disappeared echo. echo It's recommend you to install Windows XP Service Pack 1 before run this patch. echo Make sure that you really want to patch it because you cannot uninstall it from Add/Remove Programs echo. pause echo. echo. echo Applying Service Pack 2 Hotfixes. This may take a few minutes. Please standby and wait about 30 minutes to complete hotfixes installation. "Q322011_WXP_SP2_x86_ENU.exe" /q /n /z "Q323183_WXP_SP2_X86_ENU.exe" /q /n /z "Q323255_WXP_SP2_x86_ENU.exe" /q /n /z "Q327696_WXP_SP2_x86_ENU.exe" /q /n /z "Q327979_WXP_SP2_x86_ENU.exe" /q /n /z "Q328145_WXP_SP2_x86_ENU.exe" /q /n /z "Q328310_WXP_SP2_x86_ENU.exe" /q /n /z "Q329048_WXP_SP2_x86_ENU.exe" /q /n /z "Q329115_WXP_SP2_x86_ENU.exe" /q /n /z "Q329170_WXP_SP2_x86_ENU.exe" /q /n /z "Q329256_WXP_SP2_x86_ENU.exe" /q /n /z "Q329262_WXP_SP2_x86_ENU.exe" /q /n /z "Q329390_WXP_SP2_x86_ENU.exe" /q /n /z "Q329441_WXP_SP2_x86_ENU.exe" /q /n /z "Q329604_WXP_SP2_x86_ENU.exe" /q /n /z "Q329623_WXP_SP2_x86_ENU.exe" /q /n /z "Q329692_WXP_SP2_x86_ENU.exe" /q /n /z "Q329834_WXP_SP2_x86_ENU.exe" /q /n /z "Q329979_WXP_SP2_x86_ENU.exe" /q /n /z "Q331320_WXP_SP2_x86_ENU.exe" /q /n /z "Q331913_WXP_SP2_x86_ENU.exe" /q /n /z "Q331953_WXP_SP2_x86_ENU.exe" /q /n /z "Q331958_WXP_SP2_x86_ENU.exe" /q /n /z "Q810032_WXP_SP2_x86_ENU.exe" /q /n /z "Q810243_WXP_SP2_x86_ENU.exe" /q /n /z "Q810272_WXP_SP2_x86_ENU.exe" /q /n /z "Q810400_WXP_SP2_x86_ENU.exe" /q /n /z "Q810565_WXP_SP2_x86_ENU.exe" /q /n /z "Q810577_WXP_SP2_x86_ENU.exe" /q /n /z "Q810833_WXP_SP2_x86_ENU.exe" /q /n /z "Q811009_WXP_SP2_x86_ENU.exe" /q /n /z "Q811493_WXP_SP2_x86_ENU.exe" /q /n /z "Q811630_WXP_SP2_x86_ENU.exe" /q /n /z "Q814033_WXP_SP2_x86_ENU.exe" /q /n /z "Q815411_WXP_SP2_x86_ENU.exe" /q /n /z "Q815485_WXP_SP2_x86_ENU.exe" /q /n /z "js56nen.exe" /q "q324929.exe" /q "q328970.exe" /q "q331923.exe" /q "q810847.exe" /q "q813951.exe" /q "updatesecdrv.exe" /q "VM-SFIX3.exe" /q echo. echo. Echo Installation complete. Please restart your Windows to apply all Service Pack 2 hotfixes. and sp2_patch_uninstallable.bat @echo off echo Windows XP Service Pack 2 hotfixes auto-patch echo By Windows X, deadknightz@hotmail.com echo Website: http://windowsx.idz.net echo. echo This will install Windows XP Service Pack 2 Hot fixes. Press any key to continue or press Ctrl-C to exit patch. echo. echo When system ask you to restart computer, select No to continue patching and restart computer when this dialog has been disappeared echo. echo It's recommend you to install Windows XP Service Pack 1 before run this patch. echo. pause echo. echo. echo Applying Service Pack 2 Hotfixes. This may take a few minutes. Please standby and wait about 30 minutes to complete hotfixes installation. "Q322011_WXP_SP2_x86_ENU.exe" /q /z "Q323183_WXP_SP2_X86_ENU.exe" /q /z "Q323255_WXP_SP2_x86_ENU.exe" /q /z "Q327696_WXP_SP2_x86_ENU.exe" /q /z "Q327979_WXP_SP2_x86_ENU.exe" /q /z "Q328145_WXP_SP2_x86_ENU.exe" /q /z "Q328310_WXP_SP2_x86_ENU.exe" /q /z "Q329048_WXP_SP2_x86_ENU.exe" /q /z "Q329115_WXP_SP2_x86_ENU.exe" /q /z "Q329170_WXP_SP2_x86_ENU.exe" /q /z "Q329256_WXP_SP2_x86_ENU.exe" /q /z "Q329262_WXP_SP2_x86_ENU.exe" /q /z "Q329390_WXP_SP2_x86_ENU.exe" /q /z "Q329441_WXP_SP2_x86_ENU.exe" /q /z "Q329604_WXP_SP2_x86_ENU.exe" /q /z "Q329623_WXP_SP2_x86_ENU.exe" /q /z "Q329692_WXP_SP2_x86_ENU.exe" /q /z "Q329834_WXP_SP2_x86_ENU.exe" /q /z "Q329979_WXP_SP2_x86_ENU.exe" /q /z "Q331320_WXP_SP2_x86_ENU.exe" /q /z "Q331913_WXP_SP2_x86_ENU.exe" /q /z "Q331953_WXP_SP2_x86_ENU.exe" /q /z "Q331958_WXP_SP2_x86_ENU.exe" /q /z "Q810032_WXP_SP2_x86_ENU.exe" /q /z "Q810243_WXP_SP2_x86_ENU.exe" /q /z "Q810272_WXP_SP2_x86_ENU.exe" /q /z "Q810400_WXP_SP2_x86_ENU.exe" /q /z "Q810565_WXP_SP2_x86_ENU.exe" /q /z "Q810577_WXP_SP2_x86_ENU.exe" /q /z "Q810833_WXP_SP2_x86_ENU.exe" /q /z "Q811009_WXP_SP2_x86_ENU.exe" /q /z "Q811493_WXP_SP2_x86_ENU.exe" /q /z "Q811630_WXP_SP2_x86_ENU.exe" /q /z "Q814033_WXP_SP2_x86_ENU.exe" /q /z "Q815411_WXP_SP2_x86_ENU.exe" /q /z "Q815485_WXP_SP2_x86_ENU.exe" /q /z "js56nen.exe" /q "q324929.exe" /q "q328970.exe" /q "q331923.exe" /q "q810847.exe" /q "q813951.exe" /q "updatesecdrv.exe" /q "VM-SFIX3.exe" /q echo. echo. Echo Installation complete. Please restart your Windows to apply all Service Pack 2 hotfixes. regards alex

@ AaronXP I don't have it yet , still downloading . I will post the batch when I finish the download. regards alex

Hi!, I find this sp2 update pack : http://windowsx.techconnect.ws/enhance/download/wxp_sp2_auto-patch.rar Don't know if it worth, here's a description : regards alex

@jdgordon Try to download a new version of nero 5.5.10.50 tested, or the new 6.0.0.13 I think, it's all you need and it's 28M alex

OK , webmedic I'll try the code. To be more specific : I want to make a FRESH install of WinXP on the desired partition and to format the partition before installing. Like the normal WinXP CD do. (Note: The partition allready contains a winXP, but I like a new fresh installation with reformat) THX regards alex

THX , I hardly wait for the release. Hope it will be a custom one , so every body can make the desired changes. anyway THX regards alex

@venim I posted the same question some day's ago. I still have the same problem. I think is a little bit complicated. I read in ref.chm that it must be created a winboom.ini file, but until now I have no experience for doing that. I read that this can be done by deleting the partition for windows (C:) , recreate the partition and then the installer ask how to format the new partition. I don't try this, but today I'll try and post the results. regards alex

A nice job webmedic. Can you upload a description and all the codes somewere on the net? Maybe everyone can make his unattended XPCD with his own wishes. THX regards alex

I have a nvidia card and I use this code to install the drivers and all is OK and the install make no reboot for me. I have same problem like muiz , but after adding /noreboot everything's fine. ECHO. ECHO Installing nVidia Gforce 4 MX-440 8X Drivers start /wait %systemdrive%\drivers\nvidia\setup.exe -s -f1"%systemdrive%\drivers\nvidia\setup.iss" /noreboot ECHO Please wait... ECHO. regards alex

I think is a matter of encription of the registration code: "Registration"="**********************************" I find that using the same user and registration code the line looks diferent on diferent PC. Also on the same PC looks diferent if a fresh install of winXP is done. alex

@webmedic I don't need the IDE_RAID drivers , I only have an IDE ata133 HDD. Can I use your scripts also in this case or do I need to modify the scripts and/or delete the drivers for this kind of hardware. THX alex

@Terminator3 Ok I'll try . You say that I must use the next line? OemPnPDriversPath=Drivers\b2c2 THX alex

Hi! I want to add in unattended XP CD the UltraIso6.1 but it doesn't work the registration process. My line is : ECHO. ECHO Installing UltraIso ECHO Please wait... start /wait %systemdrive%\install\ultraiso\ultraiso.exe /verysilent /sp- REGEDIT /S %systemdrive%\install\ultraiso\uiso.reg ECHO. and the uiso.reg file looks like this: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\EasyBoot Systems\UltraISO\5.0] @="C:\\Program Files\\UltraISO" "ISOFolder"="C:\\Documents and Settings\\valexvo\\My Documents\\My ISO Files" "UseSkins"="1" "SoundEffect"="1" "UserName"="********" "Registration"="*********************************" "MainLeft"="7" "MainTop"="0" "MainWidth"="785" "MainHeight"="574" "HSplitter"="249" "VSplitter1"="217" "VSplitter2"="217" "ConfigLeft"="453" "ConfigTop"="274" "ProgressLeft"="400" "ProgressTop"="220" "CDFormat"="1" "FileNameFormat"="1" "DefViewer"="C:\\WINDOWS\\system32\\NOTEPAD.EXE" "OpenFolder"="C:\\Documents and Settings\\valexvo\\My Documents\\My ISO Files" "SaveFolder"="C:\\Documents and Settings\\valexvo\\My Documents\\My ISO Files" "Reopen"="" [HKEY_USERS\S-1-5-21-1935655697-1214440339-725345543-1003\Software\EasyBoot Systems\UltraISO\5.0] @="C:\\Program Files\\UltraISO" "ISOFolder"="C:\\Documents and Settings\\valexvo\\My Documents\\My ISO Files" "UseSkins"="1" "SoundEffect"="1" "UserName"="********" "Registration"="**********************************" "MainLeft"="7" "MainTop"="0" "MainWidth"="785" "MainHeight"="574" "HSplitter"="249" "VSplitter1"="217" "VSplitter2"="217" "ConfigLeft"="453" "ConfigTop"="274" "ProgressLeft"="400" "ProgressTop"="220" "CDFormat"="1" "FileNameFormat"="1" "DefViewer"="C:\\WINDOWS\\system32\\NOTEPAD.EXE" "OpenFolder"="C:\\Documents and Settings\\valexvo\\My Documents\\My ISO Files" "SaveFolder"="C:\\Documents and Settings\\valexvo\\My Documents\\My ISO Files" "Reopen"="" whats wrong? is another registry key that I missed? THX regards alex

THX to all I already made it and it works. the line is : OemPnPDriversPath=Drivers\b2c2\skynet.inf;Drivers\b2c2 regards alex

@MadMan03 When you start a VirtualPC under the CD menu choose capture image and browse to the desired .iso file , then make a restart of the Virtual PC. In case the .Iso file is a bootable one the VPC boot from the file. regards alex

@ sTe I have tried that and don't work

Hi all, I have finished my unattended XP CD. I have only one problem: My Skystar2 driver refuse to install. I pointed in Unattended section with following: OemPnPDriversPath="\Drivers\b2c2\skynet.inf" , but this driver refuse to sign in. Can somebody tell me what's wrong ? any ideea? . THX regards alex

Hi all and THX for the new board I'm a little confused about the unattended swich. I want that at the begining of XP instalation to preserve the fresh install option and to reformat the C: drive. How can I do that? Any help apreciated THX regards alex

THX to all. @ Igor If I understand well, I must create a 1G FAT32 partition and create there a fixed pagefile of 400M . Here I have one question : where to put the 1G partition ? I have c: 10G, d: 20G, e: 20G, f: 10G , all NTFS . Right after C: or after D: ? I think after d: is better because is in the middle of NTFS phisical drive. But you may have a better experience , so please tell me the right choice. THX regards alex