Jump to content

Yurek3

Member
  • Posts

    272
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    United States

Everything posted by Yurek3

  1. PicoZip silent sombody know THX
  2. THX I`m very glad for your job. Exelent, i will remember you lon time. Yurek3
  3. For me work this Nero7.cmd I did compres Nero7 and I get 97MBconfig.txt Finalization.cmd After decomres Nero7Demo 100MB I get 344MB nex I did 7-zip file Nero7.exe I get 97MB For me thih is exelant
  4. Give the name this file please. I`m very interesting for this file THX
  5. This is scrypr from WPI and reg key Work for me. Registry Mechanik 5.0
  6. @funyfarm You can write guide stet by step InstallRite. And how much MB get your instalation in \WPI\instal\nero\"here" If you get 560MB .You instal all or only Nero and Nero Expres is not important. You cen save only time. If you get 76MB in \WPI\instal\nero\"here" this is good job. Write please what you did. THX
  7. Do this for me work alltime exelant We can do Nero7.7z = Nero7.exe and put in scvpack and install this Aplications in T-12. See ther http://www.msfn.org/board/index.php?showtopic=39048 Nero.cmd CMDOW @ /HID @ECHO OFF Nero7.msi /passive REGEDIT /S nero7.reg EXIT Or @echo off NeroSuite .msi ADDLOCAL=ALL PIDKEY=xxxxxxxxxxxxxxxxxxxx /norestart /qb-! REGEDIT /S nero7.reg EXIT Config.txt ;!@Install@!UTF-8! RunProgram="startx /wait Nero7.cmd" ;!@InstallEnd@! nero.reg Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Ahead\Installation\Families\Nero 7\Info] "Serial7_1127858803"="xxxxxxxxxxxxxxxxxxxxxxxx" Finalisation.cmd copy /b 7zs.sfx + nero7.reg + config.txt + Nero7.7z Nero7.exe Yurek3
  8. You try this first Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Ahead\Installation\Families\Nero 7\Info] "Serial7_1127858803"="xxxxxxxxxxxxxxxxxxxxxxxx" next NeroSuite .msi ADDLOCAL=ALL PIDKEY=xxxxxxxxxxxxxxxxxxxxx /norestart /qb-!
  9. @kelsenellenelvian This is not key number "Serial7_1127525675"="enter your serial here" number should look like that "Serial7_1127525675"="xxxxxxxxxxxxxxxxxxxxxxxxx"
  10. We can do Nero7.7z = Nero7.exe and put in scvpack and install this Aplications in T-12. See ther http://www.msfn.org/board/index.php?showtopic=39048 Nero.cmd CMDOW @ /HID @ECHO OFF Nero7.msi /passive REGEDIT /S nero7.reg EXIT Or @echo off NeroSuite .msi ADDLOCAL=ALL PIDKEY=xxxxxxxxxxxxxxxxxxxx /norestart /qb-! REGEDIT /S nero7.reg EXIT Config.txt ;!@Install@!UTF-8! RunProgram="startx /wait Nero7.cmd" ;!@InstallEnd@! nero.reg Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Ahead\Installation\Families\Nero 7\Info] "Serial7_1127858803"="xxxxxxxxxxxxxxxxxxxxxxxx" Finalisation.cmd copy /b 7zs.sfx + nero7.reg + config.txt + Nero7.7z Nero7.exe Yurek3
  11. @kelsenellenelvian this file does not work sorry in before T -39 receive blue screen with information , it with this file is not the file of system Windows Xp Mistake critical see there http://www.d--b.webpark.pl/reverse04_en.htm How to fully disable System File Checker (SFC, WFP). The method with patching sfc_os.dll (or sfc.dll) file dont disable fully WFP. Protected files can be replaced only manually. If any installator will use function MoveFileEx (with MOVEFILE_DELAY_UNTIL_REBOOT flag) to replace in-use protected files, then the files will be not replaced. The reason for this is, that session manager (smss.exe) while loading system, before replace any files, check list of protected files. If given file is in this list, then replace will fail. Until you add to registry AllowProtectedRenames value, the protected files will be not replaced. Second often used function is SetupInstallFile (with SP_COPY_FORCE_IN_USE flag). This function before add a file to replace-list, check with SfcIsFileProtected (from sfc_os.dll) whether the file is protected or not. If file sfc_os.dll is patched, then SfcIsFileProtected will return always false. So SetupInstallFile will no add AllowProtectedRenames value to the registry. I have develop my own method to full disabling WFP. This method is simple, more flexible and dont need to patch any files. It based on empty list of protected files. So WFP is on, but list of protected files is empty and all files are not protected. List of protected files is in file sfcfiles.dll. I have wrote my own sfcfiles.dll file with empty list. One thing that is to do, is replace this one file. How replace sfcfiles.dll file ? This file is a in-use protected file. To replace it, you need copy my sfcfiles0.dll into system directory and add two values to this key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager After reboot, WFP will be fully disabled. To add this two values to registry you must have admin rights. And dont forget to make backup of old sfcfiles.dll. 1) Value name: PendingFileRenameOperations Value type: array of null-terminated strings (REG_MULTI_SZ) Value data: \??\c:\winnt\system32\sfcfiles0.dll !\??\c:\winnt\system32\sfcfiles.dll This value is used to replace files at reboot time. In first line is a path to the file that should be moved. In second line is new path for this file. Note: Creating a value of REG_MULTI_SZ type in registry editor is available from XP version. To replace this file in Windows 2000 use automatic installation descripted below. 2) Value name: AllowProtectedRenames Value typ: DWORD (REG_DWORD) Value data: 1 This value is needed to replace protected file. And that is all. Automatic installation mode for Windows 2000 user (work also in XP). I have added two functions to sfcfiles0.dll file: Install and Uninstall. These functions will add two values to registry. Before calling these functions, file sfcfiles0.dll should be in system directory. Function: Install Calling: Select a command "Execute..." from start menu (or in command prompt) and enter: rundll32 sfcfiles0 Install First, this function will make backup of old sfcfiles.dll file to system32\dllcache directory, and add two registry values. If file sfcfiles.dll exist already in dllcache, then it will be not overwrite. After reboot file sfcfiles0.dll will be renamed to sfcfiles.dll. Function: Uninstall Calling: Select a command "Execute..." from start menu (or in command prompt) and enter: rundll32 sfcfiles Uninstall This function copy in dllcache the file sfcfiles.dll to sfcfiles.tmp. This temporary file will be moved after reboot to system32 directory. File sfcfiles.dll (with empty list) from system directory will be copyed to sfcfiles0.dll..
  12. It isn't trojan. M$ doesn't like such files and he gave them trojan for antyvir campaigns Trojan wants going outside in order to seize check-ups above this computer. this file isn't doing it. He is only showing wasps, that niem of no files to protection.
  13. How to fully disable System File Checker (SFC, WFP). The method with patching sfc_os.dll (or sfc.dll) file dont disable fully WFP. Protected files can be replaced only manually. If any installator will use function MoveFileEx (with MOVEFILE_DELAY_UNTIL_REBOOT flag) to replace in-use protected files, then the files will be not replaced. The reason for this is, that session manager (smss.exe) while loading system, before replace any files, check list of protected files. If given file is in this list, then replace will fail. Until you add to registry AllowProtectedRenames value, the protected files will be not replaced. Second often used function is SetupInstallFile (with SP_COPY_FORCE_IN_USE flag). This function before add a file to replace-list, check with SfcIsFileProtected (from sfc_os.dll) whether the file is protected or not. If file sfc_os.dll is patched, then SfcIsFileProtected will return always false. So SetupInstallFile will no add AllowProtectedRenames value to the registry. I have develop my own method to full disabling WFP. This method is simple, more flexible and dont need to patch any files. It based on empty list of protected files. So WFP is on, but list of protected files is empty and all files are not protected. List of protected files is in file sfcfiles.dll. I have wrote my own sfcfiles.dll file with empty list. One thing that is to do, is replace this one file. How replace sfcfiles.dll file ? This file is a in-use protected file. To replace it, you need copy my sfcfiles0.dll into system directory and add two values to this key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager After reboot, WFP will be fully disabled. To add this two values to registry you must have admin rights. And dont forget to make backup of old sfcfiles.dll. 1) Value name: PendingFileRenameOperations Value type: array of null-terminated strings (REG_MULTI_SZ) Value data: \??\c:\winnt\system32\sfcfiles0.dll !\??\c:\winnt\system32\sfcfiles.dll This value is used to replace files at reboot time. In first line is a path to the file that should be moved. In second line is new path for this file. Note: Creating a value of REG_MULTI_SZ type in registry editor is available from XP version. To replace this file in Windows 2000 use automatic installation descripted below. 2) Value name: AllowProtectedRenames Value typ: DWORD (REG_DWORD) Value data: 1 This value is needed to replace protected file. And that is all. Automatic installation mode for Windows 2000 user (work also in XP). I have added two functions to sfcfiles0.dll file: Install and Uninstall. These functions will add two values to registry. Before calling these functions, file sfcfiles0.dll should be in system directory. Function: Install Calling: Select a command "Execute..." from start menu (or in command prompt) and enter: rundll32 sfcfiles0 Install First, this function will make backup of old sfcfiles.dll file to system32\dllcache directory, and add two registry values. If file sfcfiles.dll exist already in dllcache, then it will be not overwrite. After reboot file sfcfiles0.dll will be renamed to sfcfiles.dll. Function: Uninstall Calling: Select a command "Execute..." from start menu (or in command prompt) and enter: rundll32 sfcfiles Uninstall This function copy in dllcache the file sfcfiles.dll to sfcfiles.tmp. This temporary file will be moved after reboot to system32 directory. File sfcfiles.dll (with empty list) from system directory will be copyed to sfcfiles0.dll.. http://www.d--b.webpark.pl/reverse04_en.htm
  14. It isn't trojan. M$ doesn't like such files and he gave them trojan for antyvir campaigns Trojan wants going outside in order to seize check-ups above this computer. this file isn't doing it. He is only showing wasps, that niem of no files to protection.
  15. See there http://www.msfn.org/board/index.php?showtopic=55711
  16. How to fully disable System File Checker (SFC, WFP). The method with patching sfc_os.dll (or sfc.dll) file dont disable fully WFP. Protected files can be replaced only manually. If any installator will use function MoveFileEx (with MOVEFILE_DELAY_UNTIL_REBOOT flag) to replace in-use protected files, then the files will be not replaced. The reason for this is, that session manager (smss.exe) while loading system, before replace any files, check list of protected files. If given file is in this list, then replace will fail. Until you add to registry AllowProtectedRenames value, the protected files will be not replaced. Second often used function is SetupInstallFile (with SP_COPY_FORCE_IN_USE flag). This function before add a file to replace-list, check with SfcIsFileProtected (from sfc_os.dll) whether the file is protected or not. If file sfc_os.dll is patched, then SfcIsFileProtected will return always false. So SetupInstallFile will no add AllowProtectedRenames value to the registry. I have develop my own method to full disabling WFP. This method is simple, more flexible and dont need to patch any files. It based on empty list of protected files. So WFP is on, but list of protected files is empty and all files are not protected. List of protected files is in file sfcfiles.dll. I have wrote my own sfcfiles.dll file with empty list. One thing that is to do, is replace this one file. How replace sfcfiles.dll file ? This file is a in-use protected file. To replace it, you need copy my sfcfiles0.dll into system directory and add two values to this key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager After reboot, WFP will be fully disabled. To add this two values to registry you must have admin rights. And dont forget to make backup of old sfcfiles.dll. 1) Value name: PendingFileRenameOperations Value type: array of null-terminated strings (REG_MULTI_SZ) Value data: \??\c:\winnt\system32\sfcfiles0.dll !\??\c:\winnt\system32\sfcfiles.dll This value is used to replace files at reboot time. In first line is a path to the file that should be moved. In second line is new path for this file. Note: Creating a value of REG_MULTI_SZ type in registry editor is available from XP version. To replace this file in Windows 2000 use automatic installation descripted below. 2) Value name: AllowProtectedRenames Value typ: DWORD (REG_DWORD) Value data: 1 This value is needed to replace protected file. And that is all. Automatic installation mode for Windows 2000 user (work also in XP). I have added two functions to sfcfiles0.dll file: Install and Uninstall. These functions will add two values to registry. Before calling these functions, file sfcfiles0.dll should be in system directory. Function: Install Calling: Select a command "Execute..." from start menu (or in command prompt) and enter: rundll32 sfcfiles0 Install First, this function will make backup of old sfcfiles.dll file to system32\dllcache directory, and add two registry values. If file sfcfiles.dll exist already in dllcache, then it will be not overwrite. After reboot file sfcfiles0.dll will be renamed to sfcfiles.dll. Function: Uninstall Calling: Select a command "Execute..." from start menu (or in command prompt) and enter: rundll32 sfcfiles Uninstall This function copy in dllcache the file sfcfiles.dll to sfcfiles.tmp. This temporary file will be moved after reboot to system32 directory. File sfcfiles.dll (with empty list) from system directory will be copyed to sfcfiles0.dll.. http://www.d--b.webpark.pl/reverse04_en.htm
  17. DreamPackPL (version 2oo4.o6.1o) Damian Bakowski e-mail: d--b@wp.pl web: www.d--b.webpark.pl This tool is FREE for non-commercial usage. THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. YOU USE THIS SOFTWARE ONLY FOR OWN RISK. REQUIREMENTS ------------ - Windows 2000, XP - Windows installation CD Note! To get access to Windows XP, You can use also CD from Windows 2000. CONTENT ------- - DreamPack.exe 87050 bytes - sfcfiles.dll 39424 bytes INSTALLATION ------------ 1) Install Installation on current machine. You must have admin rights. After installation you must reboot system. 2) Create CD Create from original Windows Installation CD new bootable CD with DreamPackPL. From this CD you can boot every machine with 2000/XP system without knowing admin password. How to create new Windows installation CD for DreamPackPL: You can create this CD with program DremPackPL only in Windows 2000/XP. DreamPackPL will need 400-600MB free space for creating ISO image. After image file is created, You can burn it with any program. * boot from CD After boot from CD You must choose system in Recovery Console. Console will accept every admin password. You can change current directory > cd system32 You should also make backup of sfcfiles.dll (backup file sfcfiles.lld will be used during uninstalling) > ren sfcfiles.dll sfcfiles.lld Then You must copy from CD file pinball.ex_ into system32 directory with change file name to sfcfiles.dll > copy x:\i386\pinball.ex_ sfcfiles.dll (x - CD drive letter; 'map' command display all drive letters) Finally You can write 'exit' command and reboot computer. Note! All time You use DreamPackPL, Windows File Protection will be disabled. 3) Extract Extract file SFCFILES.DLL to selected path. If you use other software to boot system or have FAT partition, then you can manually replace sfcfiles.dll on target system. -- Configuration of DreamPackPL is stored in registry in encrypted form end protected from deleting or change. While uninstalling this configuration is removed from registry. Log file created by Logon Logger is also encrypted. COMMANDS DESCRIPTION -------------------- Commands can be entered in edit-boxes "User Name" or "Password" in Winlogon window. Commands are not case-sensetive. Command can have 1-15 characters. Every command's character sequence can be changed. Every command can be deactivated (except DreamOn). Only DreamOn command is initially activated. Command types: --> DreamOn - default "dreamon" Display DreamPackPL window at logon desktop. --> PassOn - default "passon" Turn on standard logon mode - user name and password are requiered. --> PassOff - default "passoff" Turn on logon mode without need to enter valid password. User will be logged on with wrong password and hash (LM+NT). Entering this command in "Password" edit-box will cause automatic password acceptation. --> LogonLoggerOn - default "logonloggeron" Turn on Logon Logger. --> LogonLoggerOff - default "logonloggeroff" Turn off Logon Logger. --> DreamDesktop - default "dreamdesktop" Create (and/or switch) new desktop for system account and load Explorer shell. --> God-Password - default "god" This command-password is a master password and will be always accepted. User will be logged on with wrong password and wrong hash (LM+NT) independent from current logon mode. MENU DESCRIPTION ---------------- --> Passwords <-- -----> Normal checking Standard logon mode - user name and password are requiered. [command PassOn] -----> Logon with wrong password and hash Logon mode without need to enter valid password. User will be logged on with wrong password and hash (LM+NT). [command PassOff] -----> Logon with given hash Standard logon mode, additional with possibility to enter hash (LM+NT) - when password is unknown, but hash (LM+NT) is known. User will be logged on with given (wrong) password and given hash. -----> Hash Calculator Compute hash (LM+NT) from given password. -----> Hash Audit Display users list and hashes (LM+NT). --> Accounts <-- -----> Windows accounts panel Display standard system accounts edit window. --> Logon Logger <-- -----> Use Logon Logger Turn on/off Logon Logger (initially deactivated). [commands LogonLoggerOn, LogonLoggerOff] -----> Log file view and settings Display Logon Logger settings window. -----> Delete file Delete Logon Logger log file. --> Execute <-- -----> Console Execute Console -----> Regedit Execute Regedit -----> Task Manager Execute Task Manager -----> Sysedit Execute System Configuration Editor -----> Notepad Execute Notepad -----> Calculator Execute Calculator -----> Explorer shell Load Explorer shell -----> Other... Execute selected program. --> Desktops <-- -----> Create (switch to) DreamPackPL desktop Create (and/or switch) new desktop for system account and load Explorer shell. [command DreamDesktop] --> Commands <-- -----> Commands settings Display commands settings window --> Uninstall DreamPackPL <-- Uninstall DreamPackPL. UNINSTALLING ------------ There is no need to boot again from CD. Just select "Uninstall DreamPackPL" from menu and reboot system. Old file sfcfiles.dll will be recovered from sfcfiles.lld (after reboot this backup file will be deleted). If backup file not exist, DreamPackPL will try recover file sfcfiles.dll from system32/dllcache directory. http://www.d--b.webpark.pl/reverse04_en.htm http://www.d--b.webpark.pl/dreampackpl_en.htm http://www.d--b.webpark.pl/reverse01_en.htm Good luck
  18. //--------------------------------------------------------------------------------------------- //Polish - DO NOT DELETE !! lang = 'pl'; msgStartInstall[lang] = ['Windows Post-Installation Wizard will now exit, and in the next few minutes, the options you have selected will install.\nPlease sit back and wait while the process completes.\n\nThank you for using Windows Post-Install Wizard.']; lblTimerTitle[lang] = ['Instalator<br>will start in']; lblTimerStop[lang] = ['Ustawianie czasu']; lblInstall[lang] = ['Rozpocznij Instalacje']; lblExit[lang] = ['Wyjście']; lblHelp[lang] = ['Pomoc']; lblSelectAll[lang] = ['Wybierz wszystko']; lblSelectNone[lang] = ['Nie wybieraj nic']; lblSelectDefaults[lang] = ['Wybierz domyślne']; lblOptions[lang] = ['Opcje']; lblConfig[lang] = ['Konfiguracja']; lblSource[lang] = ['Pokaż żródło']; ttInstall[lang] = ['Rozpocnij Instalacje','Initiates the script generator<br /><br />Click this to begin generating the install script.']; ttExit[lang] = ['Koniec','Closes this application<br /><br />If you want to stick to the application defaults, press this. Minimal updates and applications will be installed. This includes Windows XP security updates.']; ttHelp[lang] = ['Pomoc','Displays basic usage, version information, and disclaimer.']; ttSelectAll[lang] = ['Wybieez wszystko','Click this will select all available options.']; ttSelectNone[lang] = ['Nie wybieraj nic','Click this will deselect all available options.']; ttSelectDefaults[lang] = ['Wybierz domyślne','This option will enable the default recommended options.<br /><br />Click if you only wish to install basic recommended options.']; ttOptions[lang] = ['Opcje','Customize your WPI.']; ttConfig[lang] = ['Konfiguracja','Configure your programlist.']; ttSource[lang] = ['Pokaż żródło','Shows the Sourcecode of WPI.'] txtRunOnceExTitle[lang] = ['Instalój programy ...']; txtUsage[lang] = ['Rozpocnij Instalacje - Installs selected components\nSelect defaults - Installs Recommended Options only\nSelect all - Installs all available packages\nSelect none - Deselect all components\n\nOptions - Customize your WPI\nConfig - Configure your programlist\nSoure - Will display the source code\n\nExit - Quits WPI without installing any components\n\nVersion - 3.5']; // //---------------------------------------------------------------------------------------------
×
×
  • Create New...